List of Al-Sc related papers

The papers are ordered by author and date

Check here for recent updates

A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  1. H. Adachi, Y. Yamamoto, T. Aida, M. Imaoka and J. Kusui: Dynamic Recrystallization under Hot Pressing in P/M 7000 Series Al Alloys containing Sc or Zr in Supersaturation, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1103-1109
    Abstract

  2. Z. Ahmad and B.J. Abdul-Aleem: Scandium Alloyed Al 5052: A High Performance Material for Marine Environment, Proc. EuroCorr 2000

  3. Z. Ahmad, A. Ul-Hamid and B.J. Abdul-Aleem: The Corrosion Behavior of Scandium Alloyed Al 5052 in Neutral Sodium Chloride Solution, Corros. Sci. 43 (2001) 1227-1243
    Abstract

  4. Z. Ahmad: The Properties and Application of Scandium-Reinforced Aluminum, JOM 55 (2) (2003) 35-39
    Preview of 1st page

  5. T. Aiura, N. Sugawara and Y. Miura: The Effect of Scandium on the As-Homogenized Microstructure of 5083 Alloy for Extrusion, Mater. Sci. Eng. A 280 (2000) 139-145
    Abstract

  6. T. Aiura and Y. Miura: The Effect of Scandium on the Microstructure of Al Alloys, Proc. Second International Conference on Processing Materials for Properties, eds. B. Mishra and C. Yamauchi, TMS (2000) 41-44

  7. L. Ajdelsztajn, A. Zúñiga, B. Jodoin and E.J. Lavernia: Cold Gas Dynamic Spraying of a High Temperature Al Alloy, Surf. & Coat. Techn. 201 (2006) 2109-2116
    Abstract

  8. L. Ajdelsztajn, A. Zúñiga, B. Jodoin and E. J. Lavernia: Cold-Spray Processing of a Nanocrystalline Al-Cu-Mg-Fe-Ni Alloy with Sc, J. Therm. Spray Technol. 15 (2006) 184-190
    Abstract, Available Online

  9. H. Akamatsu, T. Fujinami, Z. Horita and T.G. Langdon: Influence of Rolling on the Superplastic Behavior of an Al-Mg-Sc Alloy after ECAP, Scripta Mater. 44 (2001) 759-764
    Abstract

  10. A.A. Alalykin, I.I. Novikov, V.K. Portnoy and V.I. Pavlov: Superplastic Flow of Aluminum Alloys in Recrystallized and Unrecrystallized Condition, Proceedings of the Second International Conference on Aluminium Alloys, October 9-13 1990, Beijing, China 403-407

  11. S.V. Aleksandrovskii and A.R. Érdanov: Impact of Process Factors on Production of Aluminum Master Alloys containing Zirconium and Scandium, Metallurgist 51 (2007) 394-398
    Abstract

  12. A.A. Alekseev, E.A. Lukina, M.I. Ermolova and L.B. Khokhlatova: Mechanism of d'-Phase Formation in Al-Li and Al-Li-Mg Systems Alloys, Mater. Sci. Forum 396-402 (2002) 989-994
    Preview of 1st page

  13. A.A. Alekseev, O.A. Setjukov, E.A. Lukina and I.N. Fridlyander: Nature of Formation of the Areas having an Ultrafine Grain Structure in Al–Li–Mg System Alloys, Mater. Sci. Forum 519-521 (2006) 265-270
    Preview of 1st page

  14. A.A. Alekseev, E.A. Lukina, L.B. Khokhlatova, V.V. Antipov and I.A. Treninkov: Phase Transformations in Alloys 1424 (Al-Li-Mg) and 1441 (Al-Li-Cu-Mg) during Long Term Low-Temperature Exposure (LLTE), Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1000-1007
    Abstract

  15. R.A. Altynbaev et al.: Phase Equilibrium in the Al-Ba-Sc System, Russ. Metall. (4) (1987) 194-196

  16. S. Amadori, L. Pasquini, E. Bonetti, M. Cabibbo, C. Scalabroni and E. Evangelista: Anelasticity and Structural Stability of ECAP Processed Al-Mg-Si Alloys Investigated by Mechanical Spectroscopy, Mater. Sci. Forum 503-504 (2006) 835-840
    Preview of 1st page

  17. V.N. Ananev, L.B. Ber, V.G. Davydov, V.I. Elagin and A.I. Orozov: Structural Aspects of Instabilities in the Properties of Aluminum - Lithium Alloys Subject to Prolonged Low-Temperature Heating, Russ. J. Non-Ferrous Met. 38 (7) (1997) 54-61

  18. G. Angella, P. Bassani, A. Tuissi, D. Ripamonti and M. Vedani: Microstructure Evolution and Aging Kinetics of Al-Mg-Si and Al-Mg-Si-Sc Alloys Processed by ECAP, Mater. Sci. Forum 503-504 (2006) 493-498
    Preview of 1st page

  19. M.M. Antonova and V.B. Chernogorenko: Resistance to Hydrogen of Al-Sc Alloys, Russ. J. Applied Chem. 74 (2001) 396-399
    Abstract

  20. P.J. Apps, C.P. Heason and P.B. Prangnell: Ultrafine-Grain Structures Produced by Severe Deformation Processing, Mater. Sci. Forum 447-448 (2004) 423-428
    Preview of 1st page

  21. P.J. Apps and P.B. Prangnell: Grain Refinement Mechanisms Operating During Severe Deformation of Aluminum Alloys Containing Second-Phase Particles, Ultrafine Grained Materials III, eds. Y.T. Zhu, T.G. Langdon, R.Z. Valiev, S.L. Semiatin, D.H. Shin and T.C. Lowe, TMS, 2004 131-136

  22. P.J. Apps, M. Berta and P.B. Prangnell: The Effect of Dispersoids on the Grain Refinement Mechanisms during Deformation of Aluminium Alloys to Ultra-High Strains, Acta Mater. 53 (2005) 499-511
    Abstract

  23. A.J. Ardell: Measurement of Solubility Limits from Data on Precipitate Coarsening, Experimental Methods of Phase Diagram Determination, eds. J.E. Morral, R.S. Schiffman and S.M. Merchant, The Minerals, Metals & Materials Society, 1994, 57-66

  24. M. Asato, H. Takahashi, T. Inagaki, N. Fujima, R. Tamura and T. Hoshino: Cluster Expansion Approach for Relative Stability among Different Atomic Structures in Alloys: an Approach from a Dilute Limit, Mater. Trans. 48 (2007) 1711-1716
    Abstract

  25. M. Asta, S.M. Foiles and A.A. Quong: First-Principles Calculations of Bulk and Interfacial Thermodynamic Properties for fcc-based Al-Sc Alloys, Phys. Rev. B 57 (1998) 11265-11275
    Abstract

  26. M. Asta, V. Ozolins, and C. Woodward: A First-Principles Approach to Modeling Alloy Phase Equilibria, JOM 53 (9) (2001) 16-19
    Preview of 1st page

  27. M. Asta and V. Ozolins: Structural, Vibrational and Thermodynamic Properties of Al-Sc Alloys and Intermetallic Compounds, Phys. Rev. B 64 (2001) 094104-1-14
    Abstract

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  28. A. Bacha, C. Maurice, H. Klocker and J.H. Driver: The Large Strain Flow Stress Behaviour of Aluminium Alloys as Measured by Channel-Die Compression (20-500°C), Mater. Sci. Forum 519-521 (2006) 783-788
    Preview of 1st page

  29. U.B. Baek, J.S. Park, I.H. Chung, S.H. Nahm, Y.H. Ma, and Y.Y. Lee: A Study on Fatigue Properties of Sc Added Al 2519 Alloy, Key Eng. Mater. 297/300 (2005) 2483-2488
    Preview of 1st page

  30. U.B. Baek, J.S. Park, I.H. Chung, T.W. Park and S.H. Nahm: A Study on Fatigue Properties of Sc and Zr Added Al Alloy, Key Eng. Mater. 345-346 (2007) 657-660
    Preview of 1st page

  31. N. Balasubramanian and T.G. Langdon: An Analysis of Superplastic Flow after Processing by ECAP, Mater. Sci. Eng. A 410-411 (2005) 476-479
    Abstract

  32. E.S. Balmuth: The Status of Al-Li Alloys, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. III, Atlanta, Georgia, USA 82-89

  33. M.K. Banerjee and S. Bandyopadhyay: Development of Mechanically Alloyed AlSiMg-SiCp Metal Matrix Composites with Trace Scandium Additions, Proc. ACUN-2: International Composites Conference on Composites in the Transportation Industry Feb. 14-18 2000, Sydney, Australia, Vol 2 733-746

  34. C.W. Bartges, R.W. Hayland, Jr., C.J. Jensen and S.F. Baumann: Memory Disk Sheet Stock and Method, US Patent 5 554 428, Sept. 10 1996
    Available Online

  35. C.W. Bartges, S.E. Baumann, R.W. Hyland, Jr., C.L. Jensen, G.P. Tarcy, K.D. Vinnedge and T.C. Skeen: Memory Disk Sheet Stock and Method, US Patent 5 601 934, Feb. 11 1997
    Available Online

  36. M.F Bartholomeusz, J.A. Wert: Effect of Dislocation Dissociation on Crack Tip Plasticity in L12 Intermetallic Alloys, Acta Metall. Mater. 40 (1992) 673- 682

  37. T.J. Bastow, C.T. Forwood, M.A. Gibson and M.E. Smith: Local Site Symmetry and Electronic Structure of Trialuminide and Related Intermetallic Alloys Probed by Solid-State NMR, Phys. Rev. B 58 (6) (1998) 2988-2997
    Abstract

  38. T. J. Bastow, M.I. Burgar and C. Maunders: Electric Field Gradients in Metals: Correlation of Experimental Results with Ab Initio Calculation, Solid State Comm. 122 (2002) 629-632
    Abstract

  39. T.J. Bastow and S. Celotto: Clustering and Formation of Nano-Precipitates in Dilute Aluminium and Magnesium Alloys, Mater. Sci. Eng. C 23 (2003) 757-762
    Abstract

  40. G.I. Batalin, V.S. Sudavtsova and N.N. Mar'yanchik: Thermodynamic Properties of Liquid Binary Alloys of the Al-Sc, Al-V and Al-Ti Systems, Soviet Progress in Chemistry (8) (1985) 35-37

  41. S.F. Baumann, E.L. Colvin, R.W. Hyland, Jr. and J.I. Petit: Aluminum Magnesium Alloy Product Containing Dispersoids, US Patent 5 624 632, Apr. 29 1997
    Available Online

  42. Yu.A. Bazin et al.: Possible Reasons for the Modification and Hardening of Aluminium by Scandium (Summary), Sov. Non-Ferrous Met. Res. 12 (1984) 414

  43. Yu.A. Bazin, B.A. Baum: About Mechanism of Alloy Modifying with Soluble Additions, Tsvetnye Metally 35 (7) (1994) 130-136

  44. O. Beeri, D.C. Dunand and D.N. Seidman: Roles of Impurities on Precipitation Kinetics of Dilute Al–Sc Alloys, Mater. Sci. Eng. A 527 (2010) 3501-3509
    Abstract, Available Online

  45. N.A. Belov and E.S. Naumova: Prospects for the Design of Structural Cast Eutectic Al-Ce-Ni Alloys, Russ. Metall. (6) (1996) 87-90

  46. N.A. Belov, A.N. Alabin, D.G. Eskin and V.V. Istomin-Kastrovskii: Optimization of Hardening of Al–Zr–Sc Cast Alloys, J. Mater. Sci. 41 (2006) 5890-5899
    Abstract

  47. L.B. Ber and V.G. Davydov: Influence of the Ageing Realization Scheme on the Phase Transformations and Properties of Commercial Aluminium Alloys, Mater. Sci. Forum 396-402 (2002) 983-988
    Preview of 1st page

  48. P.B. Berbon, S. Komura, A. Utsunomiya, Z. Horita, M. Furukawa, M. Nemoto and T.G. Langdon: An Evaluation of Superplasticity in Aluminum-Scandium Alloys Processed by Equal-Channel Angular Pressing, Mater. Trans., JIM 40 (1999) 772-778
    Abstract

  49. A.L. Berezina et al.: Decomposition Morphology and Kinetics in an Al-Sc Alloy, Phys. Metals 10 (1990) 296-304

  50. A.L. Berezina et al.: The Influence of Scandium on the Kinetics and Morphology of Decomposition of Alloys of the Al-Li System, Phys. Met. Metall. 71 (2) (1991) 167-175

  51. A.L. Berezina, V.A. Mel'nikova, T.A. Monastyrskaya, A.D. Rud' and K.V. Chuistov: The Effect of Sc on the Stabilization of Metastable Phases during Aging of As-Cast Al-(10-14)%Mg Alloys, Met. Phys. Adv. Tech. 15 (1) (1995) 97-101

  52. A. Beresina, K. Chuistov, T. Monastyrskaya and U. Schmidt: Structure of Rapidly Quenched Al-Sc Alloys, Materials Technology (UK) 17 (1) (2002) 26-29

  53. A.L. Berezina, K.V. Chuistov, N.I. Kolobnev, L.B. Khokhlatova and T.A. Monastyrskaya: Sc in Aluminum Alloys, Mater. Sci. Forum 396-402 (2002) 741-746
    Preview of 1st page

  54. A.L. Berezina, U. Schmidt, T.A. Monastyrskaya, K.V. Chuistov, A.V. Kotko and N.I. Kolobnev: Structural State and Decomposition Kinetics in Rapidly Quenched Al-Sc, Al-Mg-Sc Alloys, Mater. Sci. Forum 396-402 (2002) 763-768
    Preview of 1st page

  55. A.L. Beresina, N.I. Kolobnev, K.V. Chuistov, A.V. Kotko and O.A. Molebny: Coherent Composite Phases Formation in Aged Al-Li Base Alloys, Mater. Sci. Forum 396-402 (2002) 977-981
    Preview of 1st page

  56. A. Berezina, O.O. Segida, V.K. Nosenko, U. Schmidt and A.V. Kotko: The Effect of Aging Processes on the Structure and Properties of Rapidly Solidified Al-Sc, Al-Zr and Al-Hf Alloys, Mater. Sci. Forum 519-521 (2006) 1815-1820
    Preview of 1st page

  57. A.L. Berezina, T.O. Monastyrska, O.A. Molebny and A.V. Kotko: Al3Sc/Al3Zr Composite Particles Formation in Deformed Al-Mg Alloys, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1034-1039
    Abstract

  58. A.L. Beresina and E.A. Segida: Microstructure Formation in Binary Al-TM Alloys under Non-Equilibrium Solidification, J. Phys.: Conf. Series 144 (2009) 012096
    Abstract, Available Online

  59. A.S. Berger, R.W. Siegel: Vacancy-Scandium Interaction in Quenched Copper, J. Phys. F 9 (1979) L67-L71
    Abstract

  60. A.S. Berger: Determination of the Electrical Resistivity of Scandium in Aluminum, J. Less-Common Met. 71 (1980) 119-126

  61. M. Berta, P.B. Pragnell and P.J. Apps: Effect of Second Phase Particles on Annealing Ultrafine Grained Aluminium Alloys Deformed by ECAE, Proc. NATO Advanced Study Institute on Nanostructured Materials by High-Pressure Severe Plastic Deformation, Donetsk, Ukraine, Sept. 22-24 2004, eds. Y.T. Zhu and V. Varyukhin, NATO Science Series II: Mathematics, Physics and Chemistry, Vol. 212, Springer, Dordrecht, The Netherlands, 2006, 293-298

  62. C. Berthier and M. Minier: Evidence of Screening Charge Depression in the Vicinity of Chromium and Manganese Impurities in Aluminium at Low Temperature, J. Phys. F 3 (1973) 1169-1177
    Abstract

  63. C. Berthier and M. Minier: Quadrupolar Nuclear Resonance Investigation of Conduction Electrons Charge Density Around a Scandium Impurity in an Aluminium Matrix, J. Phys. F 3 (1973) 1268-1273
    Abstract

  64. C. Berthier and M. Minier: Quadrupolar Nuclear Resonance Investigation of the Screening Charge around 3d Impurities in Aluminium, J. Phys. F 7 (1977) 515-520
    Abstract

  65. G. Bester and M. Fähnle: Interpretation of Ab Initio Total Energy Results in a Chemical Language: II. Stability of TiAl3 and ScAl3, J. Phys., Condens. Matter 13 (2001) 11551-11565
    Abstract

  66. S.Ya. Betsofen, O.E. Osintsev, J. Fan and S.A. Masyukov: Heterogeneity of Structure in Rolling and Annealing of Aluminum Alloys, Met. Sci. & Heat Tr. 46 (9) (2004) 371-376
    Abstract

  67. S.Ya. Betsofen and A.L. Lapin: Inhomogeneity of Texture, Particle Precipitation and Grain Size under Recrystallization of Al-Mg, Al-Mg-Li and Al-Mg-Sc Alloys, Mater. Sci. Forum 467-470 (2004) 363-368
    Preview of 1st page

  68. S. Bhandari and J. Mazumder: Laser Welding of Aluminum for Automotive Applications, Proc. Laser Apps. Auto Industry - ICALEO 2000, Laser Inst. America (LIA), Orlando, FL., Vol. 91 (2000) B30-B43

  69. R. Bhat, S. Tamirisa and O. Senkov: Thermo–Mechanical Processing of a Cast 7XXX Al Alloy Modified with Sc, 6th Global Innovations Symposium on Materials Processing, eds. T.R. Bieler, J.W. Sears, J.E. Carsley, H.L. Fraser and J.E. Smugeresky, TMS, 2005 239-244

  70. M.L. Bhatia: Volume of Formation and Ligand Field Effects in Some Intermetallics, Intermetallics 7 (1999) 641-651
    Abstract

  71. M.J. Birt et al.: The Fracture Resistance of 1420 and 1421 Al-Mg-Li Alloys, Scripta Metall. Mater. 28 (1993) 919-923

  72. S. Bjerklie: A Batty Business, Met. Finish. 104 (4) (2006) 61-62
    Online Manuscript

  73. N. Blake, M.A. Hopkins: Constitution and Age Hardening of Al-Sc Alloys, J. Mater. Sci. 20 (1985) 2861-2867

  74. J.J. Blandin and W. Beck: Status and Activities of European and International SPF-Groups, Proc. Materials Week 2001 October 1-4 2001, Munich, Germany
    Abstract

  75. H. Bo, L.B. Liu and Z.P. Jin: Thermodynamic Analysis of Al–Sc, Cu–Sc and Al–Cu–Sc System, J. Alloys & Compounds 490 (2010) 318–325
    Abstract

  76. A.A. Bondarev: Electron Beam Welding of High-Strength Aluminium Alloys, Paton Weld. J. (7) (1999) 50-53

  77. Yu.S. Borisov, A.L. Borisova, V.F. Golnik and Z.G. Ipatova: Corrosion Resistance of Thermal Spray Coatings of Quasi-Crystalline Phase-Containing AlCuFe Base Alloys, Paton Weld. J. (2) (2007) 27-31
    Abstract

  78. A.J. Bosch, R. Senden, W. Entelmann, M. Knüwer and F. Palm: Scalmalloy - a Unique High Strength and Corrosion Insensitive AlMgScZr Material Concept, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 2215-2223
    Abstract

  79. E.L. Bradley, III et al.: Superplastic Properties of an Al-2.4Mg-1.8Li-0.5Sc Alloy, Scripta Metall. Mater. 25 (1991) 717-721

  80. A.G. Bratukhin et al.: Structure and Mechanical Properties of Welded Joints in Aluminium- Lithium Alloys in Welding with Experimental Fillers with Scandium, Paton Weld. J. 5 (1993) 717-721

  81. A.G. Bratukhin et al.: RSR Alloys, Sc-bearing Aluminium Alloys and Aluminium Matrix Composites Applied to Making Aerospace Permanent Joints, Welding in the World 33 (1994) 435

  82. A.G. Bratuhin et al.: Aluminium Casting Alloys for Wrought Welded Assemblies for Aviation Purposes, Welding in the World 33 (1994) 436-439

  83. A.G. Bratukhin et al.: Advanced Cast Aluminium Alloys for Cast and Deformed Welded Structures for Aviation Technology, Weld. Inter. 9 (1995) 897-899

  84. A.G. Bratukhin et al.: Prospects for Using Aluminium-Lithium Alloys for Stamped-Welded Aviation Structures, Weld. Inter. 11 (1997) 70-74

  85. R. Braun, B. Lenczowski and G. Tempus: Effect of Thermal Exposure on the Corrosion Properties of an Al-Mg-Sc Alloy Sheet, Mater. Sci. Forum 331-337 (2000) 1647-1652
    Preview of 1st page

  86. C.A. Brice: High Strength Aluminum Alloy and Method of Producing Same, US Patent 7 032 644, April 25 2006
    Available Online

  87. M.J. O´Brien, H.F. von Bremen, M. Furukawa, Z. Horita and T.G. Langdon: A Finite Element Analysis of the Superplastic Forming of an Aluminum Alloy Processed by ECAP, Mater. Sci. Eng. A 456 (2007) 236-242
    Abstract

  88. I.G. Brodova, O.A. Chikova, I.V. Polents, P.S. Popel' and V.O. Esin: Effect of Metastable Heterogeneity of Liquid Metallic Solutions on the Structure of Cast Aluminium Alloys, Casting Processes 1 (2) (1992) 158-160

  89. I.G. Brodova et al.: Structural Investigations of Rapidly Crystallized Al-Sc Alloys, Melts 4 (1992) 392-397

  90. I.G. Brodova, D.V. Bashlikov and I.V. Polents: Influence of Heat Time Melt Treatment on the Structure and the Properties of Rapidly Solidified Aluminum Alloys with Transition Metals, Mater. Sci. Forum 269-272 (1998) 589-594
    Preview of 1st page

  91. C.E. Brooks, R.C. Dorward, R.D. Parkinson, R.A. Matuska and M. Shaarbaf: High Strength Aluminum Alloys and Process for Making the Same, World Patent WO 2005/223398 A2, Jan. 13 2005
    Available Online

  92. I. Brough, P.S. Bate and F.J. Humphreys: Optimising the Angular Resolution of EBSD, Mater. Sci. Techn. 22 (2006) 1279-1286
    Abstract

  93. V.V. Bryukhovetskii, V.P. Poida, R.I. Kuznetsova, V.F. Klepikov and A.V. Poida: Superplastic Properties of Aluminum-Lithium Alloy 1421 at High Homological Temperatures, Phys. Met. Metall. 94 (2002) 520-526
    Abstract

  94. N.G. Bukhanko, E.F. Kazakova, and E.M. Sokolovskaya: Interaction of Aluminum with Cobalt and Scandium, Russ. Metall. (4) (2001) 425-431
    Abstract

  95. M. Bünck, A. Bührig-Polaczek, B. Friedrich and R. Sauermann: Tailoring of Aluminium-Lithium Alloys for Semi-Solid Processed Automotive Parts, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 195-201
    Abstract

  96. N. Burhan and M. Ferry: Changes in Grain Size Distribution of a Submicron Grained Al-Sc Alloy during High Temperature Annealing, Mater. Sci. Forum 519-521 (2006) 1617-1622
    Preview of 1st page

  97. Y.G. Bushuev, V.E. Sylis and E.V. Shulgina: Aluminium and Scandium Alloys: Research and Testing in Space Technology, Russ. Space Bull. 3 (3) (1996) 19-21

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  98. M. Cabibbo and E. Evangelista: A TEM Study of the Combined Effect of Severe Plastic Deformation and (Zr), (Sc+Zr)-containing Dispersoids on an Al–Mg–Si Alloy, J. Mater. Sci. 41 (2006) 5329-5338
    Abstract

  99. M. Cabibbo: Affinamento Microstrutturale di una Lega Al-Mg-Si con Stabilizzanti Zr e Sc+Zr Sottoposta a Deformazione Plastica Severa, Lamiera 43 (10) (2006) 220-229

  100. M. Cabibbo, C. Scalabroni and E. Evangelista: Effects of Severe Plastic Deformation Induced by Equal-Channel Angular Pressing in the AA1200, AA5754, AA6082 and AA6106 Modified with Zr and Zr+Sc, Metall. Sci. Techn. 24 (2006) (1) 31-40

  101. M. Cabibbo, E. Evangelista, C. Scalabroni and E. Bonetti: A Transmission Electron Microscopy Study of the Role of Sc+Zr Addition to a 6082-T8 Alloy Subjected to Equal Channel Angular Pressing, Mater. Sci. Forum 503-504 (2006) 841-846
    Preview of 1st page

  102. M. Cabibbo and E. Evangelista: Effetto Combinato di una Deformazione Plastica Severa e Dispersoidi di Zr e Sc+Zr sul Processo di Affinamento Microstrutturale di una Lega Al-Mg-Si, La Metallurgia Italiana 98 (11-12)(2006) 17-26
    Available Online

  103. M. Cabibbo and E. Evangelista: Effetto Combinato di una Deformazione Plastica Severa e Dispersoidi di Zr e Sc+Zr sul Processo di Affinamento Microstrutturale di una Lega Al-Mg-Si, La Metallurgia Italiana 99 (1) (2007) 33-42

  104. G. Cacciamani, P. Riani, G. Borzone, N. Parodi, A. Saccone, R. Ferro, A. Pisch and R. Schmid-Fetzer: Thermodynamic Measurements and Assessment of the Al-Sc System, Intermetallics 7 (1999) 101-108
    Abstract, Online Manuscript

  105. J.F. Cannon and H. Tracy Hall: Effect of High Pressure on the Crystal Structures of Lanthanide Trialuminides, J. Less-Common Met. 40 (1975) 313-328
    Online Article

  106. M.C. Carroll, M.J. Mills, G.S. Daehn, P.I. Gouma, M.F. Savage and B.R. Dunbar: Effects of Minor Sc and Zr Additions on Commercial Al-Mg-Mn Alloys, Automotive Alloys 1999, ed. S. Das, TMS (2000) 239-246
    Abstract

  107. P. Cavaliere: Effect of Minor Sc and Zr Addition on the Mechanical Properties of Friction Stir Processed 2024 Aluminium Alloy, J. Mater. Sci. 41 (2006) 4299-4302
    Abstract

  108. P. Cavaliere and M. Cabibbo: Effect of Sc and Zr Additions on the Microstructure and Fatigue Properties of AA6106 Produced by Equal-Channel-Angular-Pressing, Mater. Charact. 59 (2008) 197-203
    Abstract

  109. M.K. Cavanaugh, N. Birbilis, R.G. Buchheit and F. Bovard: Investigating Localized Corrosion Susceptibility Arising from Sc Containing Intermetallic Al3Sc in High Strength Al-Alloys, Scripta Mater. 56 (2007) 995-998
    Abstract

  110. S. Celotto and T.J. Bastow: 45Sc Nuclear Magnetic Resonance Analysis of Precipitation in Dilute Al-Sc Alloys, Phil. Mag. A 80 (2000) 1111-1125
    Abstract

  111. E. Cerri and P. Leo: Influence of Severe Plastic Deformation on Aging of Al–Mg–Si Alloys, Mater. Sci. Eng. A 410-411 (2005) 226-229
    Abstract

  112. D.J. Chakrabarti, J.T. Staley, S.F. Baumann, R.R. Sawtell, P.E. Bretz and C.L. Jensen: Superplastic Aluminum Products and Alloys, US Patent 5 055 257, Oct. 8 1991
    Available Online

  113. I. Charit and R.S. Mishra: Ultrafine Grained Aluminum Alloys via Friction Stir Processing, Ultrafine Grained Materials III, eds. Y.T. Zhu, T.G. Langdon, R.Z. Valiev, S.L. Semiatin, D.H. Shin and T.C. Lowe, TMS, 2004 95-101

  114. I. Charit and R.S. Mishra: Low Temperature Superplasticity in a Friction-Stir-Processed Ultrafine Grained Al–Zn–Mg–Sc Alloy, Acta Mater. 53 (2005) 4211-4223
    Abstract

  115. P.P. Chattopadhyay, S. Datta and M.K. Banerjee: On the Formation of V-Phase in Mechanically Alloyed AlSiMg-SiCp Metal Matrix Composites with Trace Scandium Additions, Mater. Sci. Eng. A333 (2002) 67-71
    Abstract

  116. G.M. Cheldieva et al.: Formation and Decomposition of Metastable Phases in Aluminum Alloys, Russ. Metall. (6) (1990) 87-90

  117. C.-H. Chen and H.-E. Huang: Characteristics of Sputtered Al-Sc and Al-Nd Alloy Thin Films for use in Liquid Crystal Display, Mater. Trans. 46 (2005) 1413-1416
    Abstract

  118. M.H. Chen, Y.H. Xue, Y.L. Rui, J.H. Zhou and M. Wang: Numerical Simulation and Experimental Investigation of High Strain Rate Superplastic Forming (SPF) of Al-6Mg-0.2Sc Alloy, Mater. Sci. Forum 551-552 (2007) 287-292
    Preview of 1st page

  119. X. Chen, C. Luo, Q. Pan and Z. Yin: Effects of Micro-Alloying with Sc and Mn on Microstructure and Mechanical Properties of Al-Mg based Alloys, Trans. Nonferrous Met. Soc. China 15 (2005) 1108-1112

  120. Y.C. Chen, Y.Y. Huang, C.P. Chang and P.W. Kao: The Effect of Extrusion Temperature on the Development of Deformation Microstructures in 5052 Aluminium Alloy Processed by Equal Channel Angular Extrusion, Acta Mater. 51 (2003) 2005-2015
    Abstract

  121. Z. Chen and Z. Zheng: Microstructural Evolution and Ageing Behaviour of the Low Cu:Mg Ratio Al-Cu-Mg Alloys containing Scandium and Lithium, Scripta Mater. 50 (2004) 1067-1071
    Abstract

  122. Z. Chen, Z. Zheng and S.P. Ringer: Effect of Sc on the Ageing and Microstructure of an Al-Cu-Mg Alloy, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 507-512

  123. Z. Chen, Z. Zheng and S.P. Ringer: Effect of Small Addition of Sc on the Microstructural Evolution in Al-15Ag Alloy, J. Mater. Sci. and Technol. 21 (2005) 630-634

  124. Z.G. Chen, Z.Q. Zheng, J. Zhong and S.P. Ringer, Ageing Characteristics and Microstructural Evolution in Microalloyed Al Alloys, Mater. Sci. Forum 539-543 (2007) 438-444
    Preview of 1st page

  125. Z. Chen, S.P. Ringer, Z. Zheng and J. Zhong: Microstructural Evolution in Al-Sc and Al-Sc-Zr Alloys, Mater. Sci. Forum 546-549 (2007) 629-632
    Preview of 1st page

  126. V.V. Cherkasov et al.: Special Features of the Structure Formation and Properties of Castable Al-Mg Alloys Alloyed with Scandium, Met. Sci. & Heat Tr. (6) (1996) 268-270

  127. T. Chernyshova, L. Kobeleva and L. Bolotova: Sliding Wear Behavior of Particulate Reinforced Aluminum Based Composites, MEE-2002. Proc. 2nd Int. Conf. Materials and Coatings for Extreme Performance: Investigations, Applications, Ecologically Safe Technologies of their Production and Utilization September 16-22, 2002, Katsiveli, Crimea, Ukraine, Kiev 2002 321-322

  128. M.G. Chu and G.J. Hildeman: Aluminum Products Containing Supersaturated Levels of Dispersoids, US Patent 6 004 506, Dec. 21 1999
    Available Online

  129. M.G. Chu and G.J. Hildeman: Supersaturated Aluminium Alloy, European Patent EP 1 111 079 A1, June 27 2001

  130. V.N. Chudin: Fabrication of Sheet Radiators by Shaping - Diffusion Bonding - Brazing, Weld. Inter. 11 (1997) 478-480

  131. D.S. Chung, C.W. Jea, N.J. Park and J.K. Kim: The Influence of 0.1% Sc Addition on the Microstructure and Texture Development in Al–Zn–Mg–Cu–Zr Alloys, Mater. Sci. Forum 539-543 (2007) 463-468
    Preview of 1st page

  132. E. Clouet, M. Nastar and C. Sigli: Nucleation of Al3Zr and Al3Sc in Aluminum Alloys: From Kinetic Monte Carlo Simulations to classical Theory, Phys. Rev. B 69 (2004) 064109-1-14
    Abstract, Online Manuscript

  133. E. Clouet, A. Barbu, L. Laé and G. Martin: Precipitation Kinetics of Al3Zr and Al3Sc in Aluminum Alloys Modeled with Cluster Dynamics, Acta Mater. 53 (2005) 2313-2325
    Abstract

  134. E. Clouet, C. Hin, D. Gendt, M. Nastar and F. Soisson: Kinetic Monte Carlo Simulations of Precipitation, Adv. Eng. Mater. 8 (2006) 1210-1214
    Available Online

  135. E. Clouet, M. Nastar, A. Barbu, C. Sigli and G. Martin, An Atomic and Mesoscopic Study of Precipitation Kinetics in Al-Zr-Sc Alloys, Adv. Eng. Mater. 8 (2006) 1228-1231
    Available Online

  136. E. Clouet, L. Laé, T. Épicier, W. Lefebvre, M. Nastar and A. Deschamps: Complex Precipitation Pathways in Multicomponent Alloys, Nature Mater. 5 (2006) 482-488
    Abstract

  137. E. Clouet and A. Barbu: Using Cluster Dynamics to Model Electrical Resistivity Measurements in Precipitating AlSc Alloys, Acta Mater. 55 (2007) 391-400
    Abstract

  138. C. Colinet: Ab-Initio Calculation of Enthalpies of Formation of Intermetallic Compounds and Enthalpies of Mixing of Solid Solutions, Intermetallics 11 (2003) 1095-1102
    Abstract

  139. J.P. Collin: Alliage d'Aluminium à Hautes Teneurs en Scandium et Procédé de Fabrication de cet Alliage, French Patent FR 2 717 827, Sept. 29 1995
    Available Online

  140. F. Costello: Fine Grains from Ukraine's Scandium Stores, Mater. World (9) (2000) 23-24

  141. F.A. Costello, J.D. Robson and P.B. Prangnell: The Effect of Small Scandium Additions to AA7050 on the As-Cast and Homogenized Microstructure, Mater. Sci. Forum 396-402 (2002) 757-762
    Preview of 1st page

  142. D. Cousineau, M. Sahoo, P.D. Newcombe, T. Castles and F.A. Fasoyinu: Grain Refinement of Aluminum Alloy 356.0 with Scandium, Zirconium, and a Combination of Titanium and Boron, Proc. AFS 105th Casting Congress, Apr. 28 - May 1 2001, Dallas, Texas, USA 157-184

  143. C.E. Cross and Ø. Grong: Microstructure and Mechanical Properties of Simulated Al-Mg-Zn Weld Metal Modified with Sc and Zr, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 1441-1446

  144. S. Curtarolo, Dane Morgan and G. Ceder: Accuracy of Ab Initio Methods in Predicting the Crystal Structures of Metals: A Review of 80 Binary Alloys, Calphad 29 (2005) 163-211
    Abstract

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  145. A.F. Daech and N.K. Sarkar: Aluminum Alloy, US Patent 6 352 671, March 5 2002
    Available Online

  146. N. Dahl, K. Pedersen, M. Lefstad and B. Forbord: Co-Extrusion of Aluminium Alloys to Improve Surface Properties, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 2125-2130
    Abstract

  147. X.-Y. Dai, C.-Q. Xia, A.-R. Wu and X.-M. Peng: Influence of Scandium on Microstructures and Mechanical Properties of Al-Zn-Mg-Cu-Zr Alloys, Mater. Sci. Forum 546-549 (2007) 961-964
    Preview of 1st page

  148. M.E. van Dalen, D.C. Dunand and D.N. Seidman: Precipitation Strengthening in Al (Sc,Ti) Alloys, Affordable Metal Matrix Composites for High Performance Applications II, eds. A.B. Pandey, K.L. Kendig, J. Lewandowski and S.R. Shah, Proc. Materials Science & Technology 2003, Chicago, IL, November 9-12, 2003, 195-201
    Available Online

  149. M.E. van Dalen, D.C. Dunand and D.N. Seidman: Effects of Ti Additions on the Nanostructure and Creep Properties of Precipitation-Strengthened Al–Sc Alloys, Acta Mater. 53 (2005) 4225-4235
    Abstract, Available Online

  150. M.E. van Dalen, D.C. Dunand and D.N. Seidman: Nanoscale Precipitation and Mechanical Properties of Al-0.06 at.% Sc Alloys Microalloyed with Yb or Gd, J. Mater. Sci. 41 (2006) 7814-7823
    Abstract

  151. M.E. van Dalen, T. Gyger, D.C. Dunand and D.N. Seidman: Effects of Zr on the Microstructure and Mechanical Properties of Al-Sc-Yb Alloys, Microsc. Microanal. 13 Suppl. S02 (2007) 1618CD-1619CD
    Available Online

  152. M.E. van Dalen, R.A. Karnesky, J.R. Cabotaje, D.C. Dunand and D.N. Seidman: Erbium and Ytterbium Solubilities and Diffusivities in Aluminum as determined by Nanoscale Characterization of Precipitates, Acta Mater. 57 (2009) 4081-4089
    Abstract, Available Online

  153. J. Dang, Y. Huang amd J. Cheng: Effect of Sc and Zr on Microstructures and Mechanical Properties of As-cast Al-Mg-Si-Mn Alloys, Trans. Nonferrous Met. Soc. China 19 (2009) 540-544
    Abstract, Available Online

  154. J. Datta, S. Datta, M.K. Banerjee and S. Bandyopadhyay: Beneficial Effect of Scandium Addition on the Corrosion Behavior of Al-Si-Mg-SiCp Metal Matrix Composites, Composites Part A 35 (2004) 1003-1008
    Abstract

  155. S. Datta, P.P. Chattopadhyay and M.K. Banerjee: Development of Mechanically Alloyed AlSiMg-SiCp Metal Matrix Composites with Trace Scandium Additions, Proc. TMA-2001: International Conference on Trends in Mechanical Alloying; Science, Technology and Applications, eds. P.R. Soni and T.V. Rajan, Jaipur, India (2001) 173-179

  156. V.G. Davydov, V.I. Yelagin, V.V. Zakharov and Yu.A. Filatov: On Prospects of Application of New 01570 High-Strength Weldable Al-Mg-Sc Alloy in Aircraft Industry, Mater. Sci. Forum 217-222 (1996) 1841- 1846
    Preview of 1st page

  157. V.G. Davydov et al.: Alloying Aluminum Alloys with Scandium and Zirconium Additives, Met. Sci. & Heat Tr. (8) (1996) 347-352

  158. V.G. Davydov, L.B. Ber, V.N. Ananiev, A.I. Orozov and M.V. Samarina: The Heat Treatment Effect on Thermal Stability of Al-Li Alloys at Low Temperatures, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 985-990

  159. V.G. Davydov, T.D. Rostova, V.V. Zakharov, Yu.A. Filatov and V.I. Yelagin: Scientific Principles of Making an Alloying Addition of Scandium to Aluminium Alloys, Mater. Sci. Eng. A 280 (2000) 30-36
    Abstract

  160. V.G. Davydov, L.B. Ber, E.Ya. Kaputkin, V.I. Komov, O.G. Ukolova and E.A. Lukina: TTP and TTT Diagrams for Quench Sensitivity and Ageing of 1424 Alloy, Mater. Sci. Eng. A 280 (2000) 76-82
    Abstract

  161. V.G. Davydov, J.N. Fridlyander, M.V. Samarina, A.I. Orozov, L.B. Ber, V.I. Yelagin, R. Lang and T. Pfannenmüller: The Heat Treatment of Al-Cu-Li Alloys Ensured the Stability of Structure and Properties at Long Low Temperature Exposure, Mater. Sci. Forum 331-337 (2000) 1049-1054
    Preview of 1st page

  162. V.G. Davydov: Certain Critical Issues in the Development of Aluminum Alloys and a Technology for Aerospace Application, Russ. J. Non-Ferrous Met. 42 (8) (2001) 18-23

  163. V.G. Davydov, L.B. Ber and V.I. Komov: The TTT and TTP Diagrams of Commercial Aluminum Alloys Used for Quenching Cooling and Ageing Regimes Optimization, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 219-228

  164. V.G. Davydov, Y. Filatov, B. Lenczowski, V. Yelagin and V. Zakarov: Nichtaushärtbare Aluminiumslegierung als Halbzeug für Strukturen, European Patent EP 1 217 085 A1, June 26 2002
    Available Online

  165. V.G. Davydov, Y. Filatov, B. Lenczowski, V. Yelagin and V. Zakarov: Non Hardenable Aluminium Alloy as a Semi-Finished Product for Structures, World Patent WO 02/50325 A1, June 27 2002
    Available Online

  166. V.G. Davydov, Y. Filatov, B. Lenczowski, V. Yelagin and V. Zakarov: Non-Hardenable Aluminum Alloy as a Semi-Finished Product for Structures, US Patent 6 676 899 B2, Jan 13 2004
    Available Online

  167. A. Deschamps, F. Bley, L. Lae, M. Dumont and F. Perard: Characterisation and Modelling of Non-Isothermal Precipitation in Metallic Systems, Adv. Eng. Mater. 8 (2006) 1236-1239
    Available Online

  168. A. Deschamps, M. Dumont, L. Lae and F. Bley: Use of Small-Angle X-ray Scattering for the Characterisation of Precipitates in Aluminium Alloys, Mater. Sci. Forum 519-521 (2006) 1349-1354
    Preview of 1st page

  169. A. Deschamps, L. Lae and P. Guyot: In Situ Small-Angle Scattering Study of the Precipitation Kinetics in an Al–Zr–Sc Alloy, Acta Mater. 55 (2007) 2775-2783
    Abstract

  170. M.N. Desmukh, R.K. Pandey and A.K. Mukhopadhyay: Fatigue Behavior of 7010 Aluminum Alloy Containing Scandium, Scripta Mater. 52 (2005) 645-650
    Abstract

  171. S.P. Deshmukh, R.S. Mishra and K.L. Kendig: Creep Behavior and Threshold Stress of an Extruded Al-6Mg-2Sc-1Zr Alloy, Mater. Sci. Eng. A 381 (2004) 381-385
    Abstract

  172. S.P. Deshmukh and R.S. Mishra: Effect of Stress State on Primary Creep Behavior of PM Al-Mg-Sc-Zr-SiCp Composite, Creep Deformation and Fracture, Design, and Life Extension, eds. R.S. Mishra, J.C. Earthman, S.V. Raj and R. Viswanathan, Proc. MS&T '05, Sept. 25-28 2005, Pittsburgh, PA, USA, TMS 2005, 87-96

  173. S.P. Deshmukh, R.S. Mishra and K.L. Kendig: Creep Behavior of Extruded Al–6Mg–1Sc–1Zr–10 vol.% SiCp Composite, Mater. Sci. Eng. A 410-411 (2005) 53-57
    Abstract

  174. S. Dev, A.A. Stuart, R.C.R.D. Kumaar, B.S. Murty and K.P. Rao: Effect of Scandium Additions on Microstructure and Mechanical Properties of Al–Zn–Mg Alloy Welds, Mater. Sci. Eng. A 467 (2007) 132-138
    Abstract

  175. A.M. Diskin et al.: Superplasticity of Alloy of the Al-Cu-Mg System with Additions of Transition Metals (Summary), Sov. Non-Ferrous Met. Res. 14 (1986) 499- 500

  176. A.M. Diskin and A.A. Alalykin: Superplasticity of Duralumin and Magnalium Type Alloys with Initial Non-Recrystallized Structure, Tsvetnye Metally (5) (1987) 86-88

  177. G. Dlubek et al.: Positron Annihilation Studies of Decomposition in Al-Li Based Alloys, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 63-68

  178. G. Dlubek, S. Krause, H. Krause, A. L. Beresina, V. S. Mikhalenkov and K. V. Chuistov: Positron Studies of Precipitation Phenomena in Al-Li and in Al-Li-X (X=Cu, Mg or Sc) alloys, J.Phys.: Condens. Matter 4 (1992) 6317-6328
    Abstract

  179. S.V. Dobatkin, V.V. Zakharov and R.Z. Valiev: Nanostructures in Al-Based Alloys After Severe Plastic Deformation, Proc. First Joint International Conference on Recrystallization and Grain Growth, Eds. G. Gottstein and D.A. Molodov, August 27-31 2001, Aachen, Germany, Publ. by Springer Verlag, 2001 509-514

  180. S.V. Dobatkin: Grain Refinement and Phase Transformations in Al and Fe Based Alloys During Severe Plastic Deformation, Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 183-192
    Abstract

  181. S.V. Dobatkin: On the Increase of Thermal Stability of Ultrafine Grained Materials Obtained by Severe Plastic Deformation, Mater. Sci. Forum 426-432 (2003) 2699-2704
    Preview of 1st page

  182. S.V. Dobatkin, V.V. Zakharov, R.Z. Valiev, A.Yu. Vinogradov, T.D. Rostova, N.A. Krasilnikov, E.N. Bastarash and I.B. Trubitsyna: Nano- and Submicrocrystalline Structure Formation during High Pressure Torsion of Al-Sc and Al-Mg-Sc Alloys, Nanomaterials by Severe Plastic Deformation (Proc. NANOSPD2, Dec. 9-13 2002, Vienna, Austria), eds. M. Zehetbauer and R.Z. Valiev, Wiley VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, 2004, 158-164

  183. S.V. Dobatkin, A.M. Arsenkin, M.A. Popov and A.N. Kishchenko: Production of Bulk Metallic Nano- and Submicrocrystalline Materials by the Method of Severe Plastic Deformation, Met. Sci. & Heat Tr. 47 (5) (2005) 188-192
    Abstract

  184. S.V. Dobatkin, V.V. Zakharov and L.L. Rokhlin: Specific Features of the Strengthening during Severe Plastic Deformation of Supersaturated Solid Solutions, Mater. Sci. Forum 503-504 (2006) 399-406
    Preview of 1st page

  185. S.V. Dobatkin, V.V. Zakharov, A.Y. Vinogradov, K. Kitagawa, N.A. Krasil'nikov, T.D. Rostova and E.N. Bastarash: Nanocrystalline Structure Formation in Al-Mg-Sc Alloys during Severe Plastic Deformation, Russ. Metall. (6) (2006) 533-540
    Abstract

  186. S. Dobatkin, Y. Estrin, V. Zakharov, T. Rostova, O. Ukolova and A. Chirkova: Improvement in the Strength and Ductility of Al–Mg–Mn Alloys with Zr and Sc Additions by Equal Channel Angular Pressing, Int. J. Mat. Res. 100 (2009) 1697-1704
    Abstract

  187. V.I. Dobatkin and G.I. Eskin: Relationships Governing Modification and Nondendritic Solidification of Light Alloys, Casting Processes 1 (1) (1992) 24-28

  188. T.V. Dobatkina et al.: Section of the Isothermal Tetrahedron of the Al-Mg, Li-Sc System in the Aluminum-Rich Region, Russ. Metall. (5) (1992) 125-127

  189. M.S. Domack and D.L. Dicus: Evaluation of Sc-Bearing Aluminum Alloy C557 for Aerospace Applications, Mater. Sci. Forum 396-402 (2002) 839-844
    Preview of 1st page

  190. M.S. Domack and D.L. Dicus: Evaluation of Sc-Bearing Aluminum Alloy C557 for Aerospace Applications, NASA Technical Memorandum TM-2002-211633, April 2002
    Available Online

  191. L.M. Dougherty, I.M. Robertson, and J.S. Vetrano: A TEM Study of Dynamic Continuous Recrystallization in a Superplastic Al-4Mg-0.3Sc Alloy Mat. Res. Soc. Symp. Proc. 601 (2000) 25-30

  192. L.M. Dougherty, I.M. Robertson, J.S. Vetrano and S.M. Bruemmer: A Microstructural Study of the Effect of Particle Aging on Dynamic Continuous Recrystallization in Al-4Mg-0.3Sc, Mater. Sci. Forum 357-359 (2001) 93-98
    Preview of 1st page

  193. L.M. Dougherty, I.M. Robertson and J.S. Vetrano: Direct Observation of the Behavior of Grain Boundaries during Continuous Dynamic Recrystallization in an Al-4Mg-0.3Sc Alloy, Acta Mater. 51 (2003) 4367-4378
    Abstract

  194. L.M. Dougherty, I.M. Robertson and J.S. Vetrano: Fundamental Processes Responsible for Continuous Dynamic Recrystallization: An In Situ TEM Study, Hot Deformation of Aluminum Alloys III, eds. Z. Jin, A. Beaudoin, T.A. Bieler and B. Radhakrishnan, TMS, USA, 2003 27-34
    Abstract

  195. A.M. Drits, B.A. Kopeliovich: Influence of Fine Transition-metal Particles and Grain Structure on Fracture Behavior of Al-Cu-Mg Alloys, Russ. Metall. (4) (1985) 147-151

  196. A.M. Drits, T.V. Krymova: 1460 High-Strength Weldable Aluminum-Lithium Alloy, Russ. J. Non-Ferrous Met. 37 (3) (1996) 65-72

  197. M.E. Drits et al.: Scandium-Aluminium Interactions in the Aluminium-rich Side of the Al-Sc System, Russ. Metall. (4) (1973) 152-154

  198. M.E. Drits et al.: Effect of Alloying on the Strength Characteristics and Weldability of Aluminum Foil, Met. Sci. & Heat Tr. (3) (1979) 215-216

  199. M.E. Drits et al.: Effect of REM on the Mechanical Properties of Aluminum Alloys Containing 6.5% Mg, Met. Sci. & Heat Tr. (10) (1980) 743-745

  200. M.E: Drits et al.: Mechanism of the Influence of Scandium in Increasing the Strength and Thermal Stability of Alloys in the Al-Mg System, Sov. Phys. Dokl. 26 (3) (1981) 344-346

  201. M.E. Drits et al.: Recrystallization of Al-Sc Alloys, Russ. Metall. (1) (1982) 148-152

  202. M.E. Drits et al.: Alloy Al-Sc Age-Hardening Kinetics, Diffusion in Metals and Alloys, August 30-September 3 1982, Tihany, Hungary 616-623

  203. M.E. Drits et al.: Homogenization of Alloys in the System Al-Mg-Sc, Met. Sci. & Heat Tr. (7) (1983) 550-554

  204. M.E. Drits et al.: Metastable State Diagram of the Al-Sc System in the Range Rich in Aluminium, Russ. Metall. (1) (1983) 150-153

  205. M.E. Drits et al.: The Alloying of 01420 Alloy with Scandium, Sov. Non-Ferrous Met. Res. 11 (1983) 248-251

  206. M.E. Drits et al.: The Effect of Solution Treatment on the Ageing Processes of Al-Sc Alloys, Crystal Res. & Technol. 19 (1984) 1325-1330

  207. M.E. Drits et al.: Ageing of Alloy Al-0.3 at.% Sc, Phys. Met. Metall. 57 (6) (1984) 118-126

  208. M.E. Drits et al.: The Effects of Homogenizing Heating on the Properties of Alloys in the Al-Sc and Al-Mg-Sc Systems, Russ. Metall. (3) (1984) 192-195

  209. M.E. Drits et al.: Nature of Physicochemical Interactions in the Aluminum-Rich Corner of the Al-Sc-Mn System, Russ. Metall. (4) (1984) 229-232

  210. M.E. Drits et al.: Some Properties of the Al3Sc Phase, Sov. Non-Ferrous Met. Res. 12 (1984) 83-85

  211. M.E. Drits et al.: Effect of ScAl3 Phase Dispersity on Hardening of Al-6.3% Mg-0.21% Sc Alloy, Met. Sci. & Heat Tr. (4) (1985) 309-312

  212. M.E. Drits et al.: Effect of the Degree of Dispersion of ScAl3 Phase Segregations on the Recrystallisation of Al-Sc Alloys, Sov. Non-Ferrous Met. Res. 13 (1985) 309-314

  213. J.H. Driver: Stability of Nanostructured Metals and Alloys, Scripta Mater. 51 (2004) 819-823
    Abstract

  214. G. Du, J. Deng, D. Yan, M. Zhao and L. Rong: Coarsening Behavior of Al3(Sc, Zr) Precipitates and its Influence on Recrystallization Temperature of Al-Mg-Sc-Zr Alloy, J. Mater. Sci. Technol. 25 (2009) 749-752
    Abstract, Available Online

  215. G. Du, J. Deng, Y. Wang, D. Yan and L. Rong: Precipitation of (Al,Si)3Sc in an Al–Sc–Si Alloy, Scripta Mater. 61 (2009) 532-535
    Abstract

  216. B. Dunbar and K.P. Smith: Aluminum Alloy Sheet having High Ultimate Tensile Strength and Methods for Making the Same, US Patent 6 383 314, May 7 2002
    Available Online

  217. J.B. Dunlop: Phonon Resistivities of Dilute Transition Metal Compounds, Solid State Comm. 15 (1974) 13-17

  218. J.B. Dunlop, G. Grüner and A.D. Caplin: Dilute Intermetallic Compounds II Properties of Aluminium Rich Aluminium-Transition Metal Phases, J. Phys. F 4 (1974) 2203-2217
    Abstract

  219. J. Dutkiewicz et al.: Effect of Scandium on the Decomposition of Aluminium-Zinc Alloys, J. Mater. Sci. 27 (1992) 3032-3035

  220. J. Dutkiewicz et al.: Evolution of Precipitates in AlLiCu and AlLiCuSc Alloys after Age-Hardening Treatment, Mater. Sci. Eng. A234-236 (1997) 253-257
    Abstract

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  221. V.I. Elagin et al.: Some Features of Decomposition for the Solid Solution of Scandium in Aluminum, Met. Sci. & Heat Tr. (7) (1983) 546-549

  222. V.I. Elagin et al.: Influence of Scandium on the Structure and Properties of Al-Zn-Mg Alloys, Russ. Metall. (4) (1983) 143-146

  223. V.I. Elagin et al.: Influence of Zirconium Additions on Ageing of Al-Sc Alloys, Phys. Met. Metall. 60 (1) (1985) 88-92

  224. V.I. Elagin et al.: Scandium-alloyed Aluminum Alloys, Met. Sci. & Heat Tr. (1) (1992) 37-45

  225. V.I. Elagin et al.: Some Features of the Cast Structure of Alloys of the Al-Sc System, Met. Sci. & Heat Tr. (6) (1993) 317-319

  226. V.I. Elagin et al.: Effect of Scandium on the Structure and Properties of Alloy Al-5.5Zn- 2.0Mg, Met. Sci. & Heat Tr. (7) (1994) 375-380

  227. V.I. Elagin: Condition and Ways for Raising Crack Resistance of High-Strength Aluminum Alloys, Met. Sci. & Heat Tr. 44 (9) (2002) 371-380
    Abstract

  228. V.I. Elagin: Ways of Developing High-Strength and High-Temperature Structural Aluminum Alloys in the 21st Century, Met. Sci. & Heat Tr. 49 (9) (2007) 427-434
    Abstract

  229. R.P. Elliott, F.A. Shunk: The Al-Sc (Aluminum-Scandium) System, Bull. Alloy Phase Diagrams 2 (2) (1981) 222-223

  230. D. Emadi, A.K.P. Rao and M. Mahfoud: Influence of Scandium on the Microstructure and Mechanical Properties of A319 Alloy, Mater. Sci. Eng. A 527 (2010) 6123–6132
    Abstract

  231. R.A. Emigh et al.: Superplastic Studies in the Al-Li-Sc-Mg System, Superplasticity in Aerospace II, Eds. T.R. McNelley and H.C. Heikkenen, The Minerals, Metals & Materials Society, 1990 303-315

  232. J.D. Embury, W.J. Poole and D.J. Lloyd: The Work Hardening of Single Phase and Multi-Phase Aluminum Alloys, Mater. Sci. Forum 519-521 (2006) 71-78
    Preview of 1st page

  233. R.A. Emigh, E.L. Bradley and J.W. Morris, Jr.: The Al-Sc-Li-Mg System as a Potential Source of Superplastically Formable Alloys, Light-Weight Alloys for Aerospace Applications II, Eds. E.W. Lee and N.J. Kim, The Minerals, Metals & Materials Society, 1991 27-43

  234. O. Engler and G. Tempus: On the Influence of Scandium on the Recrystallization Behaviour of Al-Mg Alloys, Proceedings of ICOTOM 11, September 16-20 1996, China

  235. T. Epicier: Transmission Electron Microscopy and Nano-Precipitation, Adv. Eng. Mater. 8 (2006) 1197-1201
    Available Online

  236. V.N. Eremenko et al.: Phase Equilibria in the Scandium-Silicon System, Soviet Powder Met. & Met. Cer. 27 (1989) 967-972

  237. D.G. Eskin: The Effect of Alloying Additives on Structure and Properties of Cast Al-Cu-Si- Mg Alloys, Z. Metallkd. 86 (1995) 60

  238. G.I. Éskin: New Light Alloys and Efficient Technologies for Making Them, Metallurgist 46 (2) (2002) 39-41

  239. Y. Estrin, M. Janecek, G.I. Raab, R.Z. Valiev and A. Zi: Severe Plastic Deformation as a Means of Producing Ultra-Fine-Grained Net-Shaped Micro Electro-Mechanical Systems Parts, Metall. Mater. Trans. A 38A (2007) 1906-1909
    Abstract

  240. Y. Estrin: Ultrafine Grained Al Alloys by Severe Plastic Deformation: Processes and Properties, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 71-80

  241. N. Eswara Prasad, A.A. Gokhale and P. Rama Rao: Mechanical Behaviour of Aluminium-Lithium Alloys, Sadhana 28 (2003) 209-246
    Available Online

  242. E. Evangelista, M. Cabibbo and C. Scalabroni: Thermal Stability of Severe Plastic Deformed Al-Mg-Si Alloys with Al3Zr and Al3(Sc1-xZrx) Dispersoids (abstract), Book of Abstracts of the Int. Conf. on Ultrafine Grained Materials - From Basics to Applications, Sept. 25-27 2006, Kloster Irsee, Germany, 5-1

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  243. K. Fan, F. Liu, S.J. Song, G.C. Yang and Y.H. Zhou: Deduction of Activation Energy for Diffusion by Analyzing Soft Impingement in Isothermal Solid-State Precipitation, J. Alloys & Compounds 491 (2010) L11–L14
    Abstract

  244. F.A. Fasoyinu, M. Sahoo and R.G. Davies: Grain Refinement of Aluminum Alloy 356.0 with Scandium, Zirconium and a Combination of Titanium and Boron, Proc. Light Metals 2000, Eds. J. Kazadi and J. Masounave, August 20-23, 2000, Ottawa, Ontario, Canada 241-271

  245. F.A. Fasoyinu, J. Thomson, D. Cousineau, T. Castles and M. Sahoo: Grain Refinement and Thermal Analysis of Al-Mg Alloy 535, Proc. 6th International AFS Conference on Molten Aluminum Processing, Nov. 11-13 2001, Orlando, Florida, USA

  246. F.A. Fasoyinu, J. Thomson, D. Cousineau, T. Castles and M. Sahoo: Casting Characteristics of Al-Mg Alloy 535 Cast in Permanent Moulds, Proc. Light Metals 2002, ed. T. Lewis, August 11-14 2002, Montréal, Québec, Canada pp 305-320

  247. D. Fátay, E. Bastarash, K. Nyilas, S. Dobatkin, J. Gubicza and T. Ungár: X-ray Diffraction Study on the Microstructure of an Al-Mg-Sc-Zr Alloy Deformed by High-Pressure Torsion, Z. Metallkd. 94 (2003) 842-847

  248. F. Fazeli, W.J. Poole and C.W. Sinclair: Work Hardening Behaviour of an Al-2.8Mg-0.16Sc Alloy, Mater. Sci. Forum 519-521 (2006) 961-966
    Preview of 1st page

  249. F. Fazeli, W.J. Poole and C.W. Sinclair: Modeling the Effect of Al3Sc Precipitates on the Yield Stress and Work Hardening of an Al–Mg–Sc Alloy, Acta Mater. 56 (2008) 1909-1918
    Abstract

  250. V.A. Fedoseev, V.I. Ryazantsev: Mechanical Properties of Welded Joints in New Deformable Aluminium Alloys, Weld. Inter. 9 (1995) 231-233

  251. M.T. Fernandes and R.C. Dorward: Aluminum-Magnesium-Scandium Alloys with Zinc and Copper, US Patent 6 139 653, Oct. 31 2000
    Available Online

  252. M. Ferry: Influence of Fine Particles on Grain Coarsening within an Orientation Gradient, Acta Mater. 53 (2005) 773-783
    Abstract

  253. M. Ferry, N.E. Hamilton and F.J. Humphreys: Continuous and Discontinuous Grain Coarsening in a Fine-Grained Particle-Containing Al-Sc Alloy, Acta Mater. 53 (2005) 1097-1109
    Abstract

  254. M. Ferry: Uniformity of Grain Coarsening in a Submicron Grained Al-Sc Alloy Containing Local Variations in Texture, Mater. Sci. Forum 495-497 (2005) 609-614
    Preview of 1st page

  255. M. Ferry: Spatial Uniformity of the Rate of Grain Coarsening in a Submicron Al-Sc Alloy Produced by Severe Plastic Deformation, Mater. Sci. Forum 503-504 (2006) 251-256
    Preview of 1st page

  256. M. Ferry and N. Burhan: Structural and Kinetic Aspects of Continuous Grain Coarsening in a Fine-Grained Al–0.3Sc Alloy, Acta Mater. 55 (2007) 3479-3491
    Abstract

  257. M. Ferry and N. Burhan: Statistical Aspects of Grain Coarsening in a Fine Grained Al-Sc Alloy, Mater. Sci. Forum 558-559 (2007) 729-734
    Preview of 1st page

  258. M. Ferry and N. Burhan: Microstructural Evolution in a Fine-Grained Al–0.3 wt.% Sc Alloy Produced by Severe Plastic Deformation, Scripta Mater. 56 (2007) 525-528
    Abstract

  259. Yu.A. Filatov: Weldable Aluminium-Magnesium-Scandium System Base Alloys, Welding in the World 33 (1994) 428-429

  260. Yu.A. Filatov: Deformable Al-Mg-Sc Alloys and Possible Regions of Their Application, J. Adv. Mater. 2 (1995) 386-390
    Abstract

  261. Yu.A. Filatov: Deformable Alloys Based on the Al-Mg-Sc System, Met. Sci. & Heat Tr. (6) (1996) 271-274

  262. Yu.A. Filatov: Wrought Alloys of the Al-Mg-Sc System and their Application Prospects in Automobile Manufacturing, Russ. J. Non-Ferrous Met. 38 (2) (1997) 47-49

  263. Yu.A. Filatov, V.I. Yelagin and V.V. Zakharov: New Al-Mg-Sc Alloys, Mater. Sci. Eng. A 280 (2000) 97-101
    Abstract

  264. B. Forbord, H. Hallem, N. Ryum and K. Marthinsen: Precipitation and Recrystallisation in Al-Mn-Zr With and Without Sc, Mater. Sci. Eng. A 387-389 (2004) 936-939
    Abstract

  265. B. Forbord, W. Lefebvre, F. Danoix, H. Hallem and K. Marthinsen: Three Dimensional Atom Probe Investigation on the Formation of Al3(Sc,Zr)-Dispersoids in Aluminium Alloys, Scripta Mater. 51 (2004) 333-337
    Abstract

  266. B. Forbord, H. Hallem and K. Marthinsen: The Effect of Alloying Elements on Precipitation and Recrystallisation in Al-Zr Alloys, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 1179-1185

  267. B. Forbord, H. Hallem and K. Marthinsen: The Influence of Precipitation Annealing Procedure on the Recrystallisation Resistance of Al-Mn-Zr Alloys With and Without Sc, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 1263-1269

  268. B. Forbord, H. Hallem and K. Marthinsen: The Effect of Sc on the Extrudability and Recrystallisation Resistance of Al-Mn-Zr-Alloys, Mater. Sci. Forum 467-470 (2004) 369-374
    Preview of 1st page

  269. B. Forbord, L. Auran, W. Lefebvre, H. Hallem and K. Marthinsen: Rapid Precipitation of Dispersoids during Extrusion of an Al–0.91 wt.% Mn–0.13 wt.% Zr–0.17 wt.% Sc-Alloy, Mater. Sci. Eng. A 424 (2006) 174-180
    Abstract

  270. B. Forbord, H. Hallem, J. Røyset and K. Marthinsen: Thermal Stability of Al3(Scx,Zr1-x)-Dispersoids in Extruded Aluminium Alloys, Mater. Sci. Eng. A 475 (2008) 241-248
    Abstract, Available Online

  271. B.M. Freidin, Yu.V. Kuz'mich, I.G. Kolesnikova, V.I. Serba and S.G. Khayutin: Manufacture of Aluminum-base Compositions by Mechanical Alloying, Russ. J. Non-Ferrous Met. 41 (10) (2000) 57-62

  272. I.N. Fridlyander: Aluminium-Lithium Weldable Alloy 1420 (Alloying System Al-Li-Mg-Zr), Proceedings of the Fifth International Aluminium-Lithium Conference, March 27-31 1989, Williamsburg, Virginia, USA 1359-1364

  273. I.N. Fridlyander, V.S. Sandler and T.I. Nikol'skaya: Dispersoids in Deformed Aluminum Alloys containing Lithium, Met. Sci. & Heat Tr. 32 (6) (1990) 466-468

  274. I.N. Fridlyander et al.: Possibility of Creating Weldable Alloys on the Basis of the System Al-Cu-Li, Met. Sci. & Heat Tr. (9) (1991) 695-699

  275. I.N. Fridlyander et al.: Soviet Al-Li Alloys for Aerospace Application, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch- Partenkirchen, Germany, 35-42

  276. I.N. Fridlyander et al.: The Effect of Scandium on Decomposition Kinetics in Aluminium- Lithium Alloys, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 107-112

  277. I.N. Fridlyander et al.: Structure and Properties of Al-Li Alloys Alloyed with Scandium, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 381-386

  278. I.N. Fridlyander et al.: Fatigue Strength of Al-Cu-Li Alloy at Temperature 293-4 K, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 615-620

  279. I.N. Fridlyander et al.: The Peculiarities of Grain Structure of Aluminium-Lithium Alloys, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 867-871

  280. I.N. Fridlyander et.al.: High-Strength Weldable 1460 Alloy for Cryogenic Application, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 1245-1250

  281. I.N. Fridlyander et al.: Investigation of the Phase Equilibria in Aluminum Alloys Containing Lithium, Met. Sci. & Heat Tr. (10) (1993) 567-571

  282. I.N. Fridlyander, O.G. Senatorova, N.A. Ryazanova and A.O. Nikiforov: Grain Structure and Superplasticity of High Strength Al-Zn-Mg-Cu Alloys with Different Minor Additions, Mater. Sci. Forum 170-172 (1994) 345-349
    Preview of 1st page

  283. J. Fridlyander: Advanced Russian Aluminum Alloys, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. II, Atlanta, Georgia, USA 80-87

  284. J.N. Fridlyander and O.G. Senatorova: Development and Application of High-Strength Al-Zn- Mg-Cu Alloys, Mater. Sci. Forum 217-222 (1996) 1813-1818
    Preview of 1st page

  285. J.N. Fridlyander, N.I. Kolobnev, O.E. Grushko, L.M. Sheveleva, L.B. Khokhlatova, W.S. Miller and P.D. Couch: Alloying Components Optimization of Weldable Al-Li-Mg Alloy, Mater. Sci. Forum 217-222 (1996) 1847-1851
    Preview of 1st page

  286. J.N. Fridlyander, N.I. Kolobnev, O.E. Grushko and V.G. Davydov: Advanced Weldable Damage Tolerant AlMgLi Alloy for Aircraft Application, Mater. Sci. Forum 242 (1997) 249-254
    Preview of 1st page

  287. I.N. Fridlyander, L.L. Rokhlin, T.V. Dobatkina, V.V. Kinzhibalo and A.T. Tyvanchuk: Phase Diagram of the Al-Li-Sc System, Russ. Metall. (1) (1998) 161-166

  288. J.N. Fridlyander and W. Bozich: The Properties of Semiproducts of 1460 Alloy (Al-Cu-Li-Sc) and 1421 Alloy (Al-Mg-Li-Sc) at 293K and 77K, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 937-941

  289. J.N. Fridlyander, N.I. Kolobnev, L.B. Khokhlatova, E. Loechelt, P.-J. Winkler and T. Pfannenmuller: Properties of New Al-Li-Mg Alloy, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 2055-2058

  290. J.N. Fridlyander, N.I. Kolobnev, L.B. Khokhlatova, L.V. Tarasenko and I.P. Zhegina: Study of the Structure and Properties of 1420 Alloy Modifications for Sheets, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 2059-2063

  291. J.N. Fridlyander, N.I. Kolobnev, L.B. Khokhlatova, A.L. Berezina, A.V. Katko, A. Haszler and C. Keidel: Texture and Grain Structure of Al-Li-Mg-Zr-Sc Alloy Sheets, Mater. Sci. Forum 331-337 (2000) 867-870
    Preview of 1st page

  292. I.N. Fridlyander: Russian Aluminum Alloys for Aerospace and Transport Applications, Mater. Sci. Forum 331-337 (2000) 921-926
    Preview of 1st page

  293. J.N. Fridlyander, N.I. Kolobnev, L.B. Khokhlatova, K.-H. Rendigs, G. Tempus, A. Haszler, C. Keidel, T. Pfannenmüller and A.L. Berezina: Structure and Properties of Sheets of 1424 Alloy, Mater. Sci. Forum 331-337 (2000) 1393-1398
    Preview of 1st page

  294. I.N. Fridlyander: Aluminum Alloys in Aircraft in the Periods of 1970 - 2000 and 2001 - 2015, Met. Sci. & Heat Tr. 43 (1) (2001) 6-10

  295. I.N. Fridlyander, L.L. Rokhlin, N.R. Bochvar, E.V. Lysova, and O.V. Boteva: Phase Equilibria in Al-Rich Al-Cu-Sc-Li Alloys, Russ. Metall. (6) (2001) 661-666
    Abstract

  296. J.N. Fridlyander, L.B. Khokhlatova, N.I. Kolobnev, L.B. Ber, E.I. Shvechkov, K.-H. Rendigs and G. Tempus: Development of Thermally Stabilized 1424 Aluminium-Lithium Alloy for Welded Fuselage Applications, Proc. Materials Week 2001 October 1-4 2001, Munich, Germany
    Abstract

  297. I.N. Fridlyander, L.B. Khokhlatova, N.I. Kolobnev, K. Rendiks and G. Tempus: Thermally Stable Aluminum-Lithium Alloy 1424 for Application in Welded Fuselage, Met. Sci. & Heat Tr. 44 (1) (2002) 3-8
    Abstract

  298. I.N. Fridlyander: Modern Aluminum and Magnesium Alloys and Composite Materials Based on Them, 44 (7) (2002) 292-296
    Abstract

  299. J.N. Fridlyander, L.B. Khokhlatova, N.I. Kolobnev, E.I. Shvechkov, I.P. Zhegina, S.A. Karimova, K.-H. Rendigs and G. Tempus: Influence of Environment and Load Frequency on Fatigue Crack Propagation of 1424 Al-Mg-Li Alloy, Mater. Sci. Forum 396-402 (2002) 1273-1278
    Preview of 1st page

  300. I.N. Fridlyander and L.V. Molchanova: Interaction of Beryllium with Aluminum and Scandium, Russ. Metall. (5) (2003) 476-480
    Abstract

  301. I.N. Fridlyander, A.V. Dobromyslov, E.A. Tkachenko and O.G. Senatorova: Advanced High-Strength Aluminum-Base Materials Met. Sci. & Heat Tr. 47 (7) (2005) 269-275
    Abstract

  302. A.S. Fridman et al.: Cross Section of Isothermal Tetrahedron of the Al-Mg-Sc-Zr System at 500°C in the Aluminum-rich Region, Russ. Metall. (1) (1992) 207-209

  303. C.L. Fu: Electronic, Elastic and Fracture Properties of Trialuminide Alloys: Al3Sc and Al3Ti, J. Mater. Res. 5 (5) (1990) 971-979
    Abstract

  304. C.L. Fu and M.H. Yoo: Fundamentals of Mechanical Behavior in Intermetallic Compounds - A Synthesis of Atomistic and Continuum Modelling, Ordered Intermetallics - Physical Metallurgy and Mechanical Behavior, eds. C.T. Liu, R.W. Cahn and G. Sauthoff, 23-28 June 1991, Irsee, Germany 155-164

  305. H. Fujii, M. Sugamata, J. Kaneko and M. Kubota: Effect of Sc Addition on Rapidly Solidified Al-Transition Metal Alloys, Mater. Sci. Forum 396-402 (2002) 245-250
    Preview of 1st page

  306. H. Fujii, H. Akiyama, J. Kaneko, M. Sugamata and L. Blaz: Al-Sc Master Alloy Prepared by Mechanical Alloying of Aluminum with Addition of Sc2O3, Mater. Trans. 44 (2003) 1049-1052
    Abstract

  307. S.-I. Fujikawa et al.: Solid Solubility and Residual Resistivity of Scandium in Aluminum, J. Less-Common Met. 63 (1979) 87-97

  308. S.-I. Fujikawa: Impurity Diffusion of Scandium in Aluminum, Defect and Diffusion Forum 143-147 (1997) 115-120
    Preview of 1st page

  309. S.-I. Fujikawa and S. Sakauchi: Kinetics of Precipitation in Al-0.20 mass% Sc Alloys, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 805-810

  310. S.-I. Fujikawa: Scandium in Pure Aluminum and Aluminum Alloys - Its Behavior and Addition Effects, J. Japan Inst. Light Metals 49 (1999) 128-144

  311. T. Fujita, Z. Horita and T.G. Langdon: Diffusivity Measurements in Ultrafine-Grained Al-Mg Alloys Produced by Equal-Channel Angular Pressing, Proc. Thermec 2000, Dec. 4-8 2000, Las Vegas, USA

  312. T. Fujita, Z. Horita and T.G. Langdon: Characteristics of Diffusion in Al-Mg Alloys with Ultrafine Grain Sizes, Phil. Mag. A 82 (2002) 2249-2262
    Abstract

  313. T. Fujita, Z. Horita and T.G. Langdon: Diffusion in Fine-Grained Al Alloys Having Low and High Angle Grain Boundaries, Mater. Sci. Forum 396-402 (2002) 1061-1066
    Preview of 1st page

  314. T. Fujita, Z. Horita and T.G. Langdon: Using Grain Boundary Engineering to Evaluate the Diffusion Characteristics in Ultrafine-grained Al-Mg and Al-Zn Alloys, Mater. Sci. Eng. A 371 (2004) 241-250
    Abstract

  315. K. Fukunaga et al.: Temperature Dependence of Dislocation Dissociation Mode in L12 Trialuminides, Mater. Sci. Eng. A 234-236 (1997) 594-597
    Abstract

  316. K. Fukunaga et al.: Temperature Dependence of Dislocation Structure of L12-Al3Sc, Mater. Sci. Eng. A 239-240 (1997) 202-205
    Abstract

  317. K.-I. Fukunaga and Y. Miura: Electron Microscopic Analysis of Dislocation Structures in L12-Al3Sc Intermetallic Compound, J. Japan Inst. Metals 62 (1998) 369-376

  318. C.B. Fuller, D.N. Seidman and D.C. Dunand: Creep Properties of Coarse-Grained Al(Sc) Alloys at 300°C, Scripta Mater. 40 (1999) 691-696
    Abstract, Available Online

  319. C.B. Fuller, A.R. Krause, D.C. Dunand and D.N. Seidman: Microstructure and Mechanical Properties of a 5754 Aluminum Alloy Modified by Sc and Zr Additions, Mater. Sci. Eng. A 338 (2002) 8-16
    Abstract, Available Online

  320. C.B. Fuller, D.N. Seidman and D.C. Dunand: Mechanical Properties of Al(Sc,Zr) Alloys at Ambient and Elevated Temperatures, Acta Mater. 51 (2003) 4803-4814
    Abstract, Available Online

  321. C.B. Fuller, D.N. Seidman and D.C. Dunand: Structure-Mechanical Property Relationship for Al(Sc,Zr) Alloys, Hot Deformation of Aluminum Alloys III, eds. Z. Jin, A. Beaudoin, T.A. Bieler and B. Radhakrishnan, TMS, USA, 2003 531-540

  322. C.B. Fuller, J.L. Murray and D.N. Seidman: Temporal Evolution of the Nanostructure of Al(Sc,Zr) Alloys: Part I – Chemical Compositions of Al3(Sc1-xZrx) Precipitates, Acta Mater. 53 (2005) 5401-5413
    Abstract, Available Online

  323. C.B. Fuller and D.N. Seidman: Temporal Evolution of the Nanostructure of Al(Sc,Zr) Alloys: Part II – Coarsening of Al3(Sc1-xZrx) Precipitates, Acta Mater. 53 (2005) 5415-5428
    Abstract, Available Online

  324. M. Furukawa, Z. Horita, M. Nemeto and T.G. Langdon: The Relationship Between Microstructural Stability and Superplasticity in Aluminum Alloys Processed by Equal-Channel Angular Pressing, Proc. Light Metals 1999, Eds. M. Bouchard and A. Faucher, August 22-26, 1999, Quebec City, Quebec, Canada 583-592

  325. M. Furukawa, K. Oh-ishi, S. Komura, A. Yamashita, Z. Horita, M. Nemeto and T.G. Langdon: Optimization of Microstructure for Superplasticity Using Equal-Channel Angular Pressing, Mater. Sci. Forum 304-306 (1999) 97-102
    Preview of 1st page

  326. M. Furukawa, A. Utsunomiya, K. Matsubara, Z. Horita and T.G. Langdon: Influence of Magnesium on Grain Refinement and Ductility in a Dilute Al-Sc Alloy, Acta Mater. 49 (2001) 3829-3838
    Abstract

  327. M. Furukawa, A. Utsunomiya, S. Komura, Z. Horita, M. Nemoto and T.G. Langdon: Optimization for Superplasticity in Ultrafine-Grained Al-Mg-Sc Alloys Using Equal-Channel Angular Pressing, Mater. Sci. Forum 357-359 (2001) 431-436
    Preview of 1st page

  328. M.Furukawa, Z.Horita and T.G.Langdon: The Principles of Processing Using Severe Plastic Deformation: Applications to Aluminum Alloys, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 47-56

  329. M. Furukawa, S. Lee, Z. Horita and T.G. Langdon: Mechanical Properties of Al-Mg-Sc and Commercial Aluminum Alloys after ECAP, Proc. 2nd International Conference on Light Materials for Transporation Systems (LiMAT-2001), eds. N.J. Kim, C.S. Lee and D. Eylon, May 6-10 2001, Pusan, Korea, 647-652

  330. M. Furukawa, Z. Horita, M. Nemoto and T.G. Langdon: The Use of Severe Plastic Deformation for Microstructural Control, Mater. Sci. Eng. A 324 (2002) 82-89
    Abstract

  331. M. Furukawa, Z. Horita and T.G. Langdon: Developing Superplasticity at High Strain Rates Through ECAP Processing, Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 459-468
    Abstract

  332. M. Furukawa, Z. Horita, A.P. Zhilyaev and T.G. Langdon: Developing Ultrafine-Grained Microstructures through the Use of Severe Plastic Deformation, Mater. Sci. Forum 426-432 (2003) 2631-2636
    Preview of 1st page

  333. M. Furukawa, H. Akamatsu, Z. Horita and T.G. Langdon: Properties of Aluminum Alloys Processed by Equal Channel Angular Pressing Using a 60 Degrees Die, Nanomaterials by Severe Plastic Deformation (Proc. NANOSPD2, Dec. 9-13 2002, Vienna, Austria), eds. M. Zehetbauer and R.Z. Valiev, Wiley VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, 2004, 459-464

  334. M. Furukawa, K. Furuno, K. Oh-ishi, Z. Horita and T.G. Langdon: Microstructural Evolution During Superplastic Flow in Aluminum Alloys Processed by ECAP, Ultrafine Grained Materials III, eds. Y.T. Zhu, T.G. Langdon, R.Z. Valiev, S.L. Semiatin, D.H. Shin and T.C. Lowe, TMS, 2004 653-658

  335. M. Furukawa, Z. Horita and T.G. Langdon: Processing by Equal-Channel Angular Pressing: Applications to Grain Boundary Engineering, J. Mater. Sci. 40 (2005) 909-917
    Abstract

  336. K. Furuno, H. Akamatsu, K. Oh-ishi, M. Furukawa, Z. Horita and T.G. Langdon: Microstructural Development in Equal-Channel Angular Pressing using a 60° Die, Acta Mater. 52 (2004) 2497-2507
    Abstract

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  337. R. Galun, B.L. Mordike, T. Maiwald, B. Smola, R. Mergen, M. Manner and W. Uitz: Microstructure and Age-hardening Effects of Aluminium Alloys with Additions of Scandium and Zirconium, Z. Metallkd. 95 (2004) 1142-1146
    Abstract

  338. I.N. Ganiev et al.: Anodic Behavior of Alloys in the Systems Aluminum-Scandium(Yttrium, Praseodymium, Neodymium) in a Neutral Medium, J. Applied Chem. USSR 60 (1986) 1961-1965

  339. I.N. Ganiev: High-Temperature and Electrochemical Corrosion of Aluminum-Scandium Alloys, Protection of Metals 31 (1995) 543-546

  340. I.N. Ganiev et al.: Phase Diagram of Al-Zn-Al2Sc System, Russ. Metall. (3) (1995) 125-127

  341. I.N. Ganiev, M.M. Khakdodov and A.É. Berdiev: Ternary Phase Diagrams of Aluminum with Rare Earth Metals, Met. Sci. & Heat Tr. 44 (2) (2002) 54
    Abstract

  342. I.N. Ganiev: Corrosion-Electrochemical Behavior of Special-Purity Aluminum and its AK1 Alloy Alloyed with Scandium, Russ. J. Applied Chem. 77 (2004) 925-929
    Abstract

  343. Y. Gao, W. Wu, G. Feng, S. Xu and X. Ruan: Positron Annihilation Lifetime Analysis of 8090 Alloy with Doping Zn, Ag or Sc under Cryogenic Temperatures, Acta Metall. Sin. 31 (2) (1995) 91-96

  344. Y. Gao, D. Ban, Y. Han, X. Zhong and H. Liu: Atomic Bonding and Mechanical Properties of Al-Mg-Zr-Sc Alloy, Trans. Nonferrous Met. Soc. China 14 (2004) 922-927
    Abstract

  345. Y. Gao, C. Huang, X. Hou, Q. Mo and H. Liu: Atomic Bonding and Properties of Al-Mg-Sc Alloy, Mater. Trans. 46 (2005) 1148-1153
    Abstract

  346. Y. Gao Z. Luo, Q. Mo, H. Chen and C. Huang: Atomic Bonding and Properties of Al-Li-Sc Alloy, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1285-1293
    Abstract

  347. S.V. Gavrilin: Evaluation of the Cracking Resistance of Welded Joints in Welding Alloys of the Al-Zn-Mg System Using Experimental Filler Wires, Paton Weld. J. 10 (1998) 202-204

  348. H.B. Geng, S.B. Kang and B.K. Min: High Temperature Tensile Behavior of Ultra-fine Grained Al-3.3Mg-0.2Sc-0.2Zr Alloy by Equal Channel Angular Pressing, Mater. Sci. Eng. A 373 (2004) 229-238
    Abstract

  349. E.P. George, J.A. Horton, W.D. Porter and J.H. Schneibel: Brittle Cleavage of L12 Trialuminides, J. Mater. Res. 5 (8) (1990) 1639-1648
    Abstract

  350. E.P. George et al.: Deformation and Fracture of L12 Trialuminides, ISIJ International 31 (1991) 1063-1075

  351. W.W. Gerberich, S.K. Venkataraman, J.W. Hoehn and P.G. Marsh: Fracture Toughness of Intermetallics Using a Micro-Mechanical Probe, Proc. Structural Intermetallics, Champion, PA, USA Sept. 26-30 1993, TMS 569-576

  352. V.Y. Gertsman, J.S. Vetrano, C.H. Henager,Jr., and S.M. Bruemmer: EBSD Study of Microstructure Evolution in Model Aluminum Alloys During Anealing and High-Temperature Deformation, Proc. First Joint International Conference on Recrystallization and Grain Growth, Eds. G. Gottstein and D.A. Molodov, August 27-31 2001, Aachen, Germany, Publ. by Springer Verlag, 2001 837-842

  353. F. De Geuser, W. Lefebvre, P. Auger, F. Danoix, A. Bigot and D. Blavette: Atom Probe Tomography II. The Precipitation in Al Base Alloys, Adv. Eng. Mater. 8 (2006) 1206-1209
    Available Online

  354. A. Gholina, S.I. Hulley and P.B. Pragnell: The Development of an Ultra-Fine Isotropic Grain Structure During the Processing of Spray Formed Al-Li-X Alloys, Proceedings of ReX'96, the Third International Conference on Recrystallization and Related Phenomena, October 21 -24 1996, Monterey, California, USA 537-544

  355. A. Gholina and P.B. Pragnell: Cast Microstructure and Dispersoid Formation in Spray Deposited Al-Li Alloys, Mater. Sci. Techn. 15 (1999) 328-336
    Abstract

  356. A. Gholina, J. Sarkar, P.J. Withers and P.B. Pragnell: Ultrafine Grain Structures Formed by Thermomechanical Processing of Spray Cast Al-Li Alloys, Mater. Sci. Techn. 15 (1999) 605-615
    Abstract

  357. A. Gholinia, F.J. Humphreys and P.B. Prangnell: Production of Ultra-Fine Grain Microstructures in Al-Mg Alloys by Coventional Rolling, Acta Mater. 50 (2002) 4461-4476
    Abstract

  358. A. Gholinia, F.J. Humphreys and P.B. Prangnell: The Texture of Ultra-Fine Grained Al-Mg Alloys, Mater. Sci. Forum 408-412 (2002) 1519-1524

  359. A.K. Ghosh and W. Huang: Severe Deformation Based Process for Grain Subdivision and Resulting Microstructures, Proc. NATO Advanced Research Workshop on Investigations and Applications of Severe Plastic Deformation, Moscow, August 2-7 1999, eds. T.C. Lowe and R.Z. Valiev, NATO Science Series, Series 3, High Technology, vol. 80 Kluwer Academic Publishers, The Netherlands, 2000, 29-36

  360. W. Gille and O. Kabisch: SAS Studies of AlLi 9.07at% Sc 0.11at% Alloy, Proc. NATO-conference on Advanced Light Alloys and Composites, Zakopane, Poland, September 5-15 1997, NATO ASI-series, vol. 3-59, Kluwer Academic Publishers, The Netherlands, 1998, pp 319-324

  361. S.V. Golubev et al.: Effect of Viscosity and Electrical Resistance of the Structural State of Al-Sc Melts and the Structure of the Cast Metal, Russ. Met. (1) (1991) 44-49

  362. R. Grimes, R.J. Dashwood and H.M. Flower: High Strain Rate Superplastic Aluminium Alloys: The Way Forward?, Mater. Sci. Forum 357-359 (2001) 357-362
    Preview of 1st page

  363. J. Gröbner, R. Schmid-Fetzer, A. Pisch, G. Cacciamani, P. Riani, N. Parodi, G. Borzone, A. Saccone and R. Ferro: Experimental Investigations and Thermodynamic Calculation in the Al-Mg-Sc System, Z. Metallkd. 90 (1999) 872-880
    Online Manuscript

  364. J. Gröbner and R. Schmid-Fetzer: Phase Transformations in Ternary Monotectic Aluminum Alloys, JOM 57 (9) (2005) 19-23
    Preview of 1st page

  365. J. Gröbner, L.L. Rokhlin, T.V. Dobatkina and R. Schmid-Fetzer: Predictive Calculation of Phase Formation in Al-rich Al–Zn–Mg–Cu–Sc–Zr Alloys using a Thermodynamic Mg-alloy Database, J. Alloys & Compounds 433 (2007) 132-138
    Abstract

  366. K.A. Gschneider, Jr., F.W. Calderwood: The Al-Sc (Aluminum-Scandium) System, Bull. Alloy Phase Diagrams 10 (1) (1989) 34-36

  367. J. Gubicza, D. Fátay, K. Nyilas, E. Bastarash, S. Dobatkin and T. Ungár: X-ray Peak Profile Analysis on the Microstructure of Al-5.9%Mg-0.3%Sc-0.18%Zr Alloy Deformed by High Pressure Torsion Straining, Nanomaterials by Severe Plastic Deformation (Proc. NANOSPD2, Dec. 9-13 2002, Vienna, Austria), eds. M. Zehetbauer and R.Z. Valiev, Wiley VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, 2004, 420-425

  368. H.-J. Gudladt, P. Nagy: The Cyclic Crack Propagation Behaviour of a Hardenable Polycrystalline Al-Mg-Sc Alloy, Mater. Sci. Forum 13/14 (1987) 407-412

  369. M.I. Guseva, S.M. Ivanov, F. Pasti, G. Vizkeletkhi and A. Manuaba: A Study of the Phenomena of Selective Sputtering and Radiation-Induced Segregation of Impurities in the Aluminum Alloys containing Scandium, Atomic Energy 60 (1986) 230-233
    Abstract

  370. P. Guyot and L. Lae: Cluster Dynamics Modelling of Precipitation Kinetics in Al(Zr,Sc) Alloys, Adv. Eng. Mater. 8 (2006) 1243-1245
    Available Online

  371. P. Guyot and C. Sigli: Cluster Dynamics Modelling of the Precipitation Kinetics in Al(ZrSc) Alloys, Mater. Sci. Forum 519-521 (2006) 291-296
    Preview of 1st page

  372. P. Guyot, J. Lepinoux and C. Sigli: Application of Cluster Dynamics Modeling to the Precipitation in Aluminum Alloys, Int. J. Mat. Res. 100 (2009) 1440-1445
    Abstract

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  373. F. Habashi: Scandium, Metall 62 (2008) 814-816

  374. I. Halevy, O. Beeri and J. Hu: Sc-strengthened Commercial Purity Aluminum under High Pressure, J. Mater. Sci. 45 (2010) 589-592
    Abstract

  375. H. Hallem, B. Forbord and K. Marthinsen: An Investigation of Cast Structures in Al-Hf-(Sc)-(Zr) Alloys and Their Subsequent Effect on Recrystallisation Resistance after Cold Rolling, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 240-245

  376. H. Hallem, B. Forbord and K. Marthinsen: Investigation of Al-Fe-Si Alloys with Additions of Hf, Sc and Zr Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 825-831

  377. H. Hallem, W. Lefebvre, B. Forbord, F. Danoix and K. Marthinsen: The Formation of Al3(ScxZryHf1-x-y)-Dispersoids in Aluminium Alloys, Mater. Sci. Eng. A 421 (2006) 154-160
    Abstract

  378. H. Hallem, W.J. Rittel, B. Forbord and K. Marthinsen: Recrystallisation Resistance of Extruded and Cold Rolled Aluminium Alloys with Additions of Hf, Sc and Zr, Mater. Sci. Forum 519-521 (2006) 525-530
    Preview of 1st page

  379. H.Hallem, B.Forbord and K. Marthinsen: Development of Aluminium Alloys with Ultimate Recrystallisation Resistance, Mater. Sci. Forum 539-543 (2007) 167-172
    Preview of 1st page

  380. C. Hamilton, S. Dymek and O. Senkov: Friction Stir Welding of Sc-Modified Al-Zn-Mg-Cu Alloy Extrusions, Friction Stir Weldingand Processing V, eds. R.S. Mishra, M.W. Mahoney and T.J. Lienert, TMS, 2009 315-325

  381. N.E. Hamilton and M. Ferry: Grain Growth in a Nanocrystalline Al-Sc Alloy, Mater. Trans. 45 (2004) 2264-2271
    Abstract

  382. N.E. Hamilton and M. Ferry: Particle Pinning in a Nanocrystalline Al-Sc Alloy, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 992-997

  383. N. Hamilton, N. Burhan and M. Ferry: Grain Growth Inhibition in a Nanocrystalline Al-Sc Alloy, Ultrafine Grained Materials III, eds. Y.T. Zhu, T.G. Langdon, R.Z. Valiev, S.L. Semiatin, D.H. Shin and T.C. Lowe, TMS, 2004 635-640

  384. B.Q. Han, A. Verma, F.A. Mohamed and E.J. Lavernia: High-Temperature Mechanical Performance of a Cryomilled Al-Mg-Sc Alloy, Hot Deformation of Aluminum Alloys III, eds. Z. Jin, A. Beaudoin, T.A. Bieler and B. Radhakrishnan, TMS, USA, 2003 343-356

  385. B.Q. Han, E.J. Lavernia and F.A. Mohamed: Deformation Behavior of Ultrafine-Grained Aluminum Alloys Processed by Cryomilling Techniques, Ultrafine Grained Materials III, eds. Y.T. Zhu, T.G. Langdon, R.Z. Valiev, S.L. Semiatin, D.H. Shin and T.C. Lowe, TMS, 2004 489-496

  386. B.Q. Han and E.J. Lavernia: High-Temperature Behavior of a Cryomilled Ultrafine-Grained Al–7.5% Mg Alloy, Mater. Sci. Eng. A 410-411 (2005) 417-421
    Abstract

  387. B.Q. Han, E.J. Lavernia and F.A. Mohamed: Mechanical Behavior of a Cryomilled Near-Nanostructured Al-Mg-Sc Alloy, Metall. Mater. Trans. A 36A (2005) 345-355
    Preview of 1st page

  388. B.Q. Han, E.J. Lavernia and F.A. Mohamed: Mechanical Properties of Nanostructured Materials, Rev. Adv. Mater. Sci. 9 (2005) 1-16
    Available Online

  389. T. Hara, N. Hosoda, S. Nagano and T. Ueda: Stress in Al-Sc Interconnection Layers, Jpn. J. Appl. Phys. 32 (1993) L1394-L1396
    Abstract

  390. Y. Harada and D.C. Dunand: Creep Properties of Al3Sc and Al3(Sc, X) Intermetallics, Acta Mater. 48 (2000) 3477-3487
    Abstract, Available Online

  391. Y. Harada and D.C. Dunand: Microstructures and Creep Properties of Al3Sc with Ternary Transition Metal Additions, Proc. 7th International Conference on Creep and Fatigue at Elevated Temperatures (CREEP7), June 3-8 2001, Tokyo, Japan, pp. 219-226

  392. Y. Harada and D.C. Dunand: Microstructure of Al3Sc with Ternary Transition-Metal Additions, Mater. Sci. Eng. A 329-331 (2002) 686-695
    Abstract, Available Online

  393. Y. Harada and D.C. Dunand: Thermal expansion of Al3Sc and Al3(Sc0.75X0.25), Scripta Mater. 48 (2003) 219-222
    Abstract, Available Online

  394. Y. Harada and D.C. Dunand: Microstructure and Hardness of Scandium Trialuminide with Ternary Rare-Earth Additions, Mater. Sci. Forum 539-543 (2007) 1565-1570
    Preview of 1st page

  395. Y. Harada and D.C. Dunand: Microstructure of Al3Sc with ternary rare-earth additions, Intermetallics 17 (2009) 17-24
    Abstract, Available Online

  396. E. Hashimoto et al.: Thermomigration of Scandium in Aluminum, Jap. J Appl. Phys. 18 (1979) 881-887

  397. A. Haszler: Technical Challenges and Solutions for Aluminium in the Transportation Market, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 24-34

  398. Y.-D. He, X.-M. Zhang and J.-H. You: Effect of Minor Sc and Zr on Microstructure and Mechanical Properties of Al-Zn-Mg-Cu Alloy, Trans. Nonferrous Met. Soc. China 16 (2006) 1228-1235
    Abstract

  399. Y. He, X. Zhang and Z. Cao: Effect of Minor Sc and Zr Addition on Grain Refinement of As-Cast Al-Zn-Mg-Cu Alloys, China Foundry 6 (2009) 214-218
    Abstract, Available Online

  400. J.B. Hedrick: Rare-Earth Metal Prices in the USA ca. 1960 to 1994, J. Alloys & Compounds 250 (1997) 471-481
    Abstract

  401. A. Heinz, A. Haszler, C. Keidel, S. Moldenhauer, R. Benedictus and W.S. Miller: Recent Development in Aluminium Alloys for Aerospace Applications, Mater. Sci. Eng. A 280 (2000) 102-107
    Abstract

  402. C.H. Henager, Jr., J.S. Vetrano, V.Y. Gertsman and S.M. Bruemmer: Effect of Sn Additions on Superplasticity in Al-Mg-Mn-Sc Alloys, Mat. Res. Soc. Symp. Proc. 601 (2000) 323-328

  403. T. Herding, O. Kessler, G. Tempus, F. Hoffmann and P. Mayr: Mechanical and Metallographic Analysis of Hot Rolled Spray Formed Aluminium-Magnesium-Scandium Alloys, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 1377-1381

  404. T. Herding, O. Keßler and H.-W. Zoch: Spray Formed and Rolled Aluminium-Magnesium-Scandium Alloys with High Scandium Content, Mat.-wiss. u. Werkstofftech. 38 (2007) 855-861
    Available Online

  405. K. Higashi: Recent Advances and Future Directions in Superplasticity, Mater. Sci. Forum 357-359 (2001) 345-356
    Preview of 1st page

  406. K.-I. Hirano: Studies on Age-Hardenable Aluminium Alloys by Atom-Probe Field-Ion Microscope, Bull. Mater. Sci. 12 (1989) 313-323

  407. J. Hirsch, E. Brünger, S. Keller, P. Amborn and K. Kipry: Hot Forming of Al-Mg-Mn Alloys for Light-weight Car Design, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 2388-2393
    Abstract

  408. A. Hoelzl, H. Kaufmann and V. Konkevich: Semi-Solid Casting of Aluminium - Scandium (Zr) Foundry Alloys, Proc. Automotive and Transportation Technology Congress and Exposition (ATTCE 2001), Oct. 2001, Barcelona, Spain, Vol. 4 1-6

  409. S.C. Hogg, I.G. Palmer and P.S. Grant: An Investigation of Novel Spraycast Al-Mg-Li-Zr-(Sc) Alloys, Mater. Sci. Forum 519-521 (2006) 1629-1634
    Preview of 1st page

  410. A. Hölzl, V. Konkevich, H. Kaufmann and P. Uggowitzer: Aluminium Alloy, World Patent WO 2005/045080 A1, May 19 2005
    Available Online

  411. Z. Horita, M. Furukawa, K. Oh-ishi, M. Nemoto and T.G. Langdon: Equal-Channel Angular Pressing for Grain Refinement of Metallic Materials, Proc. Fourth International Conference on Recrystallization and Related Phenomena, eds. T. Sakai and H.G. Suzuki, The Japan Institute of Metals, 1999, 301-308

  412. Z. Horita, S. Komura, P.B. Berbon, A. Utsunomiya, M. Furukawa, M. Nemoto and T.G. Langdon: Superplasticity of Ultrafine-Grained Aluminum Alloys Processed by Equal-Channel Angular Pressing, Mater. Sci. Forum 304-306 (1999) 91-96
    Preview of 1st page

  413. Z. Horita, M. Furukawa, M. Nemoto, A.J. Barnes and T.G. Langdon: Superplastic Forming at High Strain Rates after Severe Plastic Deformation, Acta Mater. 48 (2000) 3633-3640
    Abstract

  414. Z. Horita, S. Lee, S. Ota, K. Neishi and T.G. Langdon: Equal-Channel Angular Pressing as a Production Tool for Superplastic Materials Mater. Sci. Forum 357-359 (2001) 471-476
    Preview of 1st page

  415. Z. Horita, T. Fujinami, K. Sato, S.B. Kang, H.W. Kim and T.G.Langdon: Microstructures and Mechanical Properties of Aluminum Alloys Processed by Equal-Channel Angular Pressing, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 271-275

  416. Z. Horita and T.G. Langdon: Microstructures and Microhardness of an Aluminum Alloy and Pure Copper after Processing by High-Pressure Torsion, Mater. Sci. Eng. A 410-411 (2005) 422-425
    Abstract

  417. Z. Horita and T.G. Langdon: Using Torsion to Produce Severe Strain and Ultrafine Grains, Ultrafine Grained Materials IV, eds. Y.T. Zhu, T.G. Langdon, Z. Horita, M. Zehetbauer, S.L. Semiatin and T.C. Lowe, TMS, 2006, 17-22

  418. Z. Horita and T.G. Langdon: Microstructural Evolution in the Processing of Bulk Samples Using High-Pressure Torsion, Mater. Sci. Forum 539-543 (2007) 80-85
    Preview of 1st page

  419. Z. Horita and T.G. Langdon: Achieving Exceptional Superplasticity in a Bulk Aluminum Alloy Processed by High-Pressure Torsion, Scripta Mater. 58 (2008) 1029-1032
    Abstract

  420. E. Hornbogen: Formation of Nanoscale Particles and their Effect on Properties of Alloys, Z. Metallkd. 94 (2003) 74-80

  421. J.A. Horton: Ductility and Fracture in L12 Intermetallic Alloys, Proc. First Pacific Rim International Conference on Advanced Materials and Processing (PRICM-1), eds. C. Shi, H. Li and A. Scott, Hangzhou, China, 23-27 June 1992, TMS 745-750

  422. T. Hoshino, M. Asato and N. Fujima: First-Principles Calculations for Stability of Atomic Structures of Al-rich AlX (X=Sc–Zn) Alloys, Including AlMn Quasicrystal: I. Solution Energies of X in Al, Intermetallics 14 (2006) 908-912
    Abstract

  423. T. Hoshino, M. Asato, S. Tanaka, F. Nakamura and N. Fujima: First-Principles Calculations for Stability of Atomic Structures of Al-rich AlX (X=Sc–Zn) Alloys, Including AlMn Quasicrystal: II. Medium-ranged Interactions of X pairs in Al, Intermetallics 14 (2006) 913-916
    Abstract

  424. T. Hoshino, N. Fujima, M. Asato and R. Tamura: Medium-ranged Interactions of Transition-metal (3d and 4d) Impurity Pairs in Al and Atomic Structures of Al-rich Al–Transition-metal Alloys, J. Alloys & Compounds 434-435 (2007) 572-576
    Abstract

  425. C.C. Hsiao: Aluminum Based Material having High Conductivity, US Patent 6 866 817, March 15 2005
    Available Online

  426. P. Hübner, R. Kiessling, H. Biermann and A. Vinogradov: Fracture Behaviour of Ultrafine-Grained Materials under Static and Cyclic Loading, Intern. J. Mater. Res. (11) (2006) 1566-1570
    Abstract

  427. D.A. Hughes, M.E. Kassner, M.G. Stout and J.S. Vetrano: Metal Forming at the Center of Excellence for the Synthesis and Processing of Advanced Materials, JOM 50 (6) (1998) 16-21
    Online Article

  428. M. Hüller and M. Göken: Microstructure and Thermal Stability of Ultrafine Grained Aluminium Alloys Perpared by Ball Milling (abstract), Book of Abstracts of the Int. Conf. on Ultrafine Grained Materials - From Basics to Applications, Sept. 25-27 2006, Kloster Irsee, Germany, 5-15

  429. B. Huneau, X. Sauvage, S. Marya, and A. Poitou: Microstructure Evolution during Friction Stir Welding of Commercial Aluminum Alloys, Friction Stir Welding and Processing III, eds. K.V. Jata, M.W. Mahoney, R.S. Mishra and T.J. Lienert, TMS, 2005, 253-260

  430. C.R. Hutchinson, B.M. Gable, N. Ciccosillo, P.T. Loo, T.J. Bastow and A.J. Hill: An Experimantal Determination of Solute-Vacancy Binding Energies in High Purity Dilute Al-X Alloys, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 788-794
    Abstract

  431. K.B. Hyde, A.F. Norman and P.B. Pragnell: The Growth Morphology and Nucleation Mechanism of Primary L12 Al3Sc Particles in Al-Sc Alloys, Mater. Sci. Forum 331-337 (2000) 1013-1018
    Preview of 1st page

  432. K.B. Hyde, A.F. Norman and P.B. Pragnell: The Effect of Cooling Rate on the Morphology of Primary Al3Sc Intermetallic Particles in Al-Sc Alloys, Acta Mater. 49 (2001) 1327-1337
    Abstract

  433. K.B. Hyde, A.F. Norman and P.B. Prangnell: The Effect of Ti on Grain Refinement in Al-Sc Alloys, Mater. Sci. Forum 396-402 (2002) 39-44
    Preview of 1st page

  434. R.W. Hyland, Jr., R.C. Stiffler: Determination of the Elastic Constants of Polycrystalline Al3Sc, Scripta Metall. Mater. 25 (1991) 473-477

  435. R.W. Hyland, Jr.: Homogeneous Nucleation Kinetics of Al3Sc in a Dilute Al-Sc Alloy, Metall. Trans. A 23A (1992) 1947-1955

  436. R.W. Hyland, Jr., M. Asta, S.M. Foiles and C.L. Rohrer: Al(f.c.c.):Al3Sc(L12) Interphase Boundary Energy Calculations, Acta Mater. 46 (1998) 3667-3678
    Abstract

  437. C.-Y. Hyun and H.-K. Kim: Fatigue Properties of a Modified 7075 Aluminum Alloy containing Scandium, J. Mater. Sci. 45 (2010) 3067-3072
    Abstract

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  438. K. Ihara and Y. Miura: High Temperature Deformation of Al-Mg and Al-Mg-Sc Alloys, Mater. Sci. Forum 396-402 (2002) 1377-1382
    Preview of 1st page

  439. K. Ihara and Y. Miura: Dynamic Recrystallization in Al-Mg-Sc Alloys, Mater. Sci. Eng. A 387-389 (2004) 647-650
    Abstract

  440. A.Z. Ikromov, I.N. Ganiev and V.V. Kinzhibalo: Equilibrium Phase Diagram of Al-Zn-Sc system at 573 and 773K, Dokl. Akad. Nauk Tadzh. SSR (6) (1990) 391-392

  441. R.V. Ilyushenko et al.: Peculiarities of Weakening of Alloy 1420 (Al-Mg-Li System) in Fusion Welding, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 1251-1256

  442. R. Ilyushenko and V. Nesterenkov: Novel Technique for Joining of Thick Section Difficult-to-Weld Aluminium Alloys, Mater. Sci. Forum 519-521 (2006) 1125-1130
    Preview of 1st page

  443. A. Inoue, S. Sobu, D.V. Louzguine, H. Kimura and K. Sasamori: Ultrahigh Strength Al-based Amorphous Alloys containing Sc, J. Mater. Res. 19 (2004) 1539-1543
    Abstract

  444. B. Irving: Scandium Places Aluminum Welding on a New Plateau, Weld. J. 76 (7) (1997) 53-57

  445. R.R. Irving: Welded Aircraft: Its Past was Dismal; Its Future is Exciting, Proc. International Symposium on Metal Welding and Applications, Eds. J.P. Boillot and M. Evrard, August 22-26, 1999, Quebec City, Quebec, Canada 3-20

  446. A.Ya. Ishchenko and T.M. Labur: Weldable Scandium-Containing Aluminium Alloys, Welding and Surfacing Reviews 9 (1998) 1-109

  447. A.Ya. Ishchenko and T.M. Labur: Welding Technology and Properties of Welded Joints in Aluminium-Lithium Alloys (Review), Paton Weld. J. 10 (1998) 360-364

  448. A.Ya. Ishchenko and T.M. Labur: Weldable Aluminium Alloys with Scandium (Review), Paton Weld. J. 10 (1998) 389-392

  449. A.Ya. Ishchenko, V.O. Chapor and M.R. Yavorskaya: Effect of Scandium Additions on Weldability of Alloy of Al-Zn-Mg System, Paton Weld. J. (11) (2000) 15-17
    Abstract

  450. A.Ya. Ishchenko, A.V. Lozovskaya, A.G. Poklyatsky, I.E. Sklabinskaya, V.S. Mashin and M.R. Yavorskaya: Increase in Strength of Welds in Arc Welding of Alloy 1420 Using the Sc-Containing Fillers, Paton Weld. J. (1) (2002) 10-14
    Abstract

  451. A.Ya. Ishchenko: High-Strength Aluminium Alloys for Welded Structures in the Aircraft Industry, Weld. Intern. 19 (2005) 173-185

  452. A.Ya. Ishchenko, V.E. Fedorchuk, A.G. Poklyatsky and M.R. Yavorskaya: Hot Cracking Resistance of Al–Zn–Mg–Cu System Alloys in Argon-Arc Welding, Paton Weld. J. (2) (2007) 7-9
    Abstract

  453. R.K. Islamgaliev, N.F. Yunusova, R.Z. Valiev, N.K. Tsenev, V.N. Perevezentsev and T.G. Langdon: Characteristics of Superplasticity in an Ultrafine-Grained Aluminum Alloy Processed by ECA Pressing, Scripta Mater. 49 (2003) 467-472
    Abstract

  454. R.K. Islamgaliev, N.F. Yunusova and R.Z. Valiev: The Influence of the SPD Temperature on Superplasticity of Aluminium Alloys, Mater. Sci. Forum 503-504 (2006) 585-590
    Preview of 1st page

  455. R.K. Islamgaliev, N.F. Yunusova and R.Z. Valiev: The Influence of the SPD Regimes on Superplastic Behavior of an Aluminum Alloy, Proc. NATO Advanced Study Institute on Nanostructured Materials by High-Pressure Severe Plastic Deformation, Donetsk, Ukraine, Sept. 22-24 2004, eds. Y.T. Zhu and V. Varyukhin, NATO Science Series II: Mathematics, Physics and Chemistry, Vol. 212, Springer, Dordrecht, The Netherlands, 2006, 299-304

  456. R.K. Islamgaliev, N.F. Yunusova, M.A. Bardinova, A.R. Kilmametov and R.Z. Valiev: Superplasticity of Ultrafine-Grained Aluminum Alloy Processed by ECAP and Warm Rolling, Mater. Sci. Forum 551-552 (2007) 13-20
    Preview of 1st page

  457. L.I. Ivanov, V.M. Lazorenko, Yu.M. Platov and V.I. Tovtin: Radiation Stability of Aluminum-Magnesium-Scandium System Alloys, Phys. Chem. Mater. Treatment (6) (1989) 496-497

  458. L.L. Ivanov, V.A. Krasnoselov, Yu.M. Platov, V.I. Tovlin, L.S. Toropova and V.K. Shamardin: Effect of Neutron Irradiation on Mechanical Properties of Low-Activated Aluminium-Based Alloys, Phys. Chem. Mater. Treatment (4) (1990) 321-323

  459. L.I. Ivanov et al.: Radiation Resistance and Parameters of Activation of Aluminium- Magnesium-Scandium and Aluminium-Magnesium-Vanadium Alloys Under Neutron Irradiation, J. Nucl. Mater. 191-194 (1992) 1075-1079

  460. S. Iwamura, M. Nakayama and Y. Miura: Coherency between Al3Sc Precipitate and the Matrix in Al Alloys Containing Sc, Mater. Sci. Forum 396-402 (2002) 1151-1156
    Preview of 1st page

  461. S. Iwamura and Y. Miura: Loss in Coherency and Coarsening Behavior of Al3Sc precipitates, Acta Mater. 52 (2004) 591-600
    Abstract

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  462. M. Jahnátek, M. Krajcí and J. Hafner: Interatomic Bonds and the Tensile Anisotropy of Trialuminides in the Elastic Limit: A Density Functional Study for Al3(Sc, Ti, V, Cr), Phil. Mag. 87 (2007) 1769-1794
    Abstract

  463. S. Jambu, B. Lenczowski and R. Rauh: Creep Forming of AlMgSc Alloys for Aeronautic and Space Applications, Proc. 23rd International Congress of Aeronautical Sciences, ICAS 2002, Sept. 8-13 2002 Toronto, Canada 632.1-632.7
    Available Online

  464. M.-J. Jeong, B.-G. Kim, S.-D. Park and B.-Y. Hur: Mechanical Properties of 7xxx Aluminum Alloy System Foam Containing Scandium, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1713-1716
    Abstract

  465. Z. Jia, B. Forbord, J. Røyset and J.K. Solberg: Effect of Heat Treatments on Hardening of Al-Zr-Sc Alloys, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 141-147
    Abstract

  466. F. Jiang, L. Bai and Z. Yin: Preparation of Scandium-Bearing Master Alloys by Aluminum-Magnesium Thermoreduction, J. Rare Earths 20 (2002) 507-511

  467. F. Jiang, Z. Yin, B. Huang, Y. He and S. Chen: Homogenization and Recrystallization of Al-6Mg Alloys With and Without Sc and Zr, J. Rare Earths 22 (2004) 600-603

  468. F. Jiang, S. Chen, B. Huang, Z Yin and Y. He: Microstructure and Properties of Al-Mg-(Sc, Zr) Welded Joint, J. Cent. South Univ. Technol. 12 Suppl.1 (2005) 23-27
    Abstract

  469. F. Jiang, K. Wen, H. Jian, C. Jiang, J. Zhao and L. Jiang: Existing Form and Action Mechanism of Minor Scandium and Zirconium in Al-Cu-Mg Alloy, J. Cent. South Univ. Technol. 17 (2010) 19-23
    Abstract

  470. X.J. Jiang et al.: Effects of Minor Additions on Precipitation and Properties of Al-Li-Cu-Mg- Zr Alloy, Scripta Metall. Mater. 29 (1993) 211-216

  471. X.J. Jiang et al.: Effects of Scandium on the Microstructure and Tensile Behavior of Al-Li- Cu-Mg-Zr Alloy, Advances in Cryogenic Engineering (Materials) 40 (1994) 1369-1376

  472. T. Jin, Z. Nie, G. Xu, H. Ruan, J. Yang, J. Fu and T. Zuo: Effects of Cooling Rate on Solidification Behavior of Dilute Al-Sc and Al-Sc-Zr Solid Solution, Trans. Nonferrous Met. Soc. of China 14 (2004) 58-62
    Abstract

  473. V. Jindal, P.K. De and K. Venkateswarlu: Effect of Al3Sc Precipitates on the Work Hardening Behavior of Aluminum–Scandium Alloys, Mater. Lett. 60 (2006) 3373-3375
    Abstract

  474. H.-H. Jo, S.-I. Fujikawa: Kinetics of Precipitation in Al-Sc Alloys and Low Temperature Solid Solubility of Scandium in Aluminium studied by Electrical Resistivity Measurements, Mater. Sci. Eng. A171 (1993) 151-161

  475. B. Jodoin, L. Ajdelsztajn, E. Sansoucy, A. Zúñiga, P. Richer and E.J. Lavernia: Effect of Particle Size, Morphology, and Hardness on Cold Gas Dynamic Sprayed Aluminum Alloy Coatings, Surf. & Coat. Techn. 201 (2006) 3422-3429
    Abstract

  476. C.-H. Joh, T. Katsube, K. Yamada and Y. Miura: Effect of Sc-Addition on the Precipitation Behavior of an Al-Li-Mg-Cu Alloy, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 799-804

  477. C.-H. Joh, K. Yamada and Y. Miura: Effect of Sc-Addition on the Coarsening Behavior of Al3Li Precipitates in Al-Li Alloys, Mater. Trans., JIM 40 (1999) 439-442
    Abstract

  478. C.-H. Joh, K. Yamada and Y. Miura: The Effect of Sc on the Formation and Growth of PFZ in Al-Li Alloys, Mater. Sci. Forum 331-337 (2000) 1037-1042
    Preview of 1st page

  479. A. Johansen, Ø. Bauger, J.D. Embury and N. Ryum: Alloy Development in the Al-Mg Alloy System Part I): Microstructural Characterization of As-Cast and Annealed Al-5%Mg-Alloy with Additions of Mn, Zr and Sc (Section 1), Aluminium 82 (2006) 868-872

  480. A. Johansen, Ø. Bauger, J.D. Embury and N. Ryum: Alloy Development in the Al-Mg Alloy System Part I): Microstructural Characterization of As-Cast and Annealed Al-5%Mg-Alloy with Additions of Mn, Zr and Sc (Section 2), Aluminium 82 (2006) 980-986

  481. A. Johansen, Ø. Bauger and N. Ryum: Alloy development in the Al-Mg-alloy system Part II): Hot Deformation Properties of As-cst and Annealed Al-4.5%Mg-alloy with Additions of Mn, Zr and Sc (Section 1), Aluminium 82 (2006) 1097-1103

  482. A. Johansen, Ø. Bauger and N. Ryum: Alloy development in the Al-Mg-alloy system Part II): Hot Deformation Properties of As-cst and Annealed Al-4.5%Mg-alloy with Additions of Mn, Zr and Sc (Section 2), Aluminium 82 (2006) 1218-1222

  483. M.J. Jones and F.J. Humphreys: Interaction of Recrystallization and Precipitation in Binary Aluminium-Scandium Alloys, Proc. First Joint International Conference on Recrystallization and Grain Growth, Eds. G. Gottstein and D.A. Molodov, August 27-31 2001, Aachen, Germany, Publ. by Springer Verlag, 2001 1287-1292

  484. M.J. Jones and F.J. Humphreys: Interaction of Recrystallization and Precipitation: The Effect of Al3Sc on the Recrystallization Behaviour of Deformed Aluminium, Acta Mater. 51 (2003) 2149-2159
    Abstract

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  485. R. Kaibyshev, O. Sitdikov and S. Olenyov: Ultrafine Grain Formation During Equal Channel Angular Extrusion in an Al-Mg-Sc Alloy, Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 65-74
    Abstract

  486. R. Kaibyshev, F. Musin, K. Saytaeva and Y. Motohashi: Formation of Ultrafine Grains During Intense Plastic Straining in an Al-Li Alloy at 400°C Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 81-87
    Abstract

  487. R. Kaibyshev, K. Saytaeva, F. Musin and Y. Motohashi: Grain Refinement in an Al-Li-Mg-Sc Alloy During Intense Plastic Straining at 300°C, Hot Deformation of Aluminum Alloys III, eds. Z. Jin, A. Beaudoin, T.A. Bieler and B. Radhakrishnan, TMS, USA, 2003 365-371

  488. R. Kaibyshev, S. Olenyov and F. Musin: Grain Refinement under Multiple Warm Compression in an Al-Mg-Sc Alloy, Mater. Sci. Forum 426-432 (2003) 4603-4608
    Preview of 1st page

  489. R. Kaibyshev, K. Shipilova, F. Musin and Y. Motohashi: Continuous Dynamic Recrystallization in an Al–Li–Mg–Sc Alloy during Equal-Channel Angular Extrusion, Mater. Sci. Eng. A 396 (2005) 341-351
    Abstract

  490. R. Kaibyshev, K. Shipilova, F. Musin and Y. Motohashi: Achieving High Strain Rate Superplasticity in an Al–Li–Mg Alloy through Equal Channel Angular Extrusion, Mater. Sci. Techn. 21 (2005) 408-418
    Abstract

  491. R. Kaibyshev and O. Osipova: Superplastic Behaviour of an Al–Li–Cu–Mg Alloy, Mater. Sci. Techn. 21 (2005) 1209-1216
    Abstract

  492. R. Kaibyshev, E. Avtokratova, A. Apollonov and R. Davies: High Strain Rate Superplasticity in an Al–Mg–Sc–Zr Alloy Subjected to Simple Thermomechanical Processing, Scripta Mater. 54 (2006) 2119-2124
    Abstract

  493. L. I. Kaygorodova, V.P. Domashnikov: Investigation of the Influence of Scandium on the Structure and Properties of an Aluminium-Magnesium Alloy during Natural Ageing, Phys. Met. Metall. 68 (4) (1989) 160-166

  494. L.I. Kaygorodova et al.: The Effect of Small Sc and Mg Addition on Al-Li-Cu-Zr Alloy Structure and Mechanical Properties, Proceedings of the Sixth International Aluminium- Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 363-367

  495. L.I. Kaigorodova et al.: Effects of Small Additions of Scandium and Magnesium on the Structure and Properties of Al-Li-Cu-Zr Alloy upon Natural Aging, Phys. Met. Metall. 73 (3) (1992) 281-285

  496. L.I. Kaigorodova et al.: Effects of Small Additions of Magnesium and Scandium on the Structure and Properties of Al-Li-Cu-Zr Alloy upon Artificial Aging, Phys. Met. Metall. 73 (3) (1992) 286-290

  497. L.I. Kaigorodova: Natural Aging of Aluminum-Magnesium Alloys: Stabilization of Properties, Phys. Met. Metall. 78 (5) (1994) 490-496

  498. L.I. Kaigorodova et al.: Effect of Small Additions of Sc and Zr on the Structure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy, Phys. Met. Metall. 81 (1996) 513-519
    Abstract

  499. L.I. Kaigorodova, I.G. Brodova, E.I. Sel'nikhina, and O.R. Shamsheeva: Effect of Small Additions of Sc and Zr on the Fine Structure of an Al–Zn–Mg–Cu Alloy after Rapid Solidification and High-Temperature Annealing, Phys. Met. Metall. 90 (3) (2000) 281-287
    Abstract

  500. K.U. Kainer and R. Unal: Powder Metallurgy Processing and Properties of Al-Mg-Sc Alloys, Proc. 1998 Powder Metallurgy World Congress & Exhibition Oct. 18-22 1998, Granada, Spain, 284-288

  501. M.S. Kaiser and M.K. Banerjee: Effect of Scandium on Cast Al-6Mg Alloys, Indian Foundry J. 52 (8) (2006) 29-43

  502. M.S. Kaiser, P.M.G. Nambissan, M.K. Banerjee, A. Sachdeva and P. K. Pujari: Positron Lifetime Studies and Coincidence Doppler Broadening Spectroscopy of Al–6Mg–xSc (x = 0 to 0.6 wt.%) Alloy, J. Mater. Sci. 42 (2007) 2618-2629
    Abstract

  503. M. Kamachi, M. Furukawa, Z. Horita and T.G. Langdon: Achieving Superplasticity of Al-1%Mg-0.2%Sc Alloy in Plate Samples Processed by Equal-Channel Angular Pressing, Mater. Trans. 45 (2004) 2521-2524
    Abstract

  504. M. Kamachi, T. Fujinami, Z. Horita and T.G. Langdon: Influence of Channel Geometry on Superplasticity in Equal-Channel Angular Pressing, Mater. Sci. Forum 447-448 (2004) 477-482
    Preview of 1st page

  505. M. Kamachi, M. Furukawa, Z. Horita and T.G. Langdon: Application of Equal-Channel Angular Pressing for Grain Refinement of Plate Samples, Ultrafine Grained Materials III, eds. Y.T. Zhu, T.G. Langdon, R.Z. Valiev, S.L. Semiatin, D.H. Shin and T.C. Lowe, TMS, 2004 407-412

  506. A.N. Kamardinkin et al.: Isothermal Sections of the Al-Sc-Zr System at 550 and 600°C in the Region Enriched in Aluminum, Russ. Metall. (4) (1991) 216-218

  507. N. Kamp, M.J. Starink, I. Sinclair, N. Gao, P.J. Gregson, P.D. Pitcher and S. Gardiner: Development of Al-Cu-Mg-Li (Mn,Zr,Sc) Alloys for Age-Forming, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 369-375

  508. S.-B. Kang, J.-W. Kim and H.-W. Kim: Effect of Deformation Route and Sc and Zr Addition on Ultra-Fine Grain Formation and Superplasticity in Al-Mg Alloys, Mater. Sci. Forum 519-521 (2006) 847-852
    Preview of 1st page

  509. M.B. Kannan, V.S. Raja, A.K. Mukhopadhyay and P. Schmuki: Environmentally Assisted Cracking Behavior of Peak-Aged 7010 Aluminum Alloy Containing Scandium, Metall. Mater. Trans. A 36A (2005) 3257-3262

  510. M.B. Kannan and V.S. Raja: Influence of Heat Treatment and Scandium Addition on the Electrochemical Polarization Behavior of Al-Zn-Mg-Cu-Zr Alloy, Metall. Mater. Trans. A 38A (2007) 2843-2852
    Abstract

  511. R.A. Karnesky, L. Meng, D.N. Seidman and D.C. Dunand: Mechanical Properties of a Heat-Treatable Al-Sc Alloy Reinforced with Al2O3 Dispersoids, Affordable Metal Matrix Composites for High Performance Applications II, Proc. Materials Science & Technology 2003, Chicago, IL, November 9-12, 2003, 215-224
    Available Online

  512. R.A. Karnesky, D.N. Seidman and D.C. Dunand: Creep of Al-Sc Microalloys with Rare-Earth Element Additions, Mater. Sci. Forum 519-521 (2006) 1035-1040
    Preview of 1st page, Available Online

  513. R.A. Karnesky, M.E. van Dalen, D.C. Dunand and D.N. Seidman: Effects of Substituting Rare-Earth Elements for Scandium in a Precipitation-strengthened Al–0.08 at. %Sc Alloy, Scripta Mater. 55 (2006) 437-440
    Abstract, Available Online

  514. R.A. Karnesky, L. Meng and D.C. Dunand: Strengthening Mechanisms in Aluminum Containing Coherent Al3Sc Precipitates and Incoherent Al2O3 Dispersoids, Acta Mater. 55 (2007) 1299-1308
    Abstract

  515. R.A. Karnesky, D.C. Dunand and D.N. Seidman: Evolution of Nanoscale Precipitates in Al microalloyed with Sc and Er, Acta Mater. 57 (2009) 4022-4031
    Abstract, Available Online

  516. M. Kawasaki and T.G. Langdon: Principles of Superplasticity in Ultrafine-Grained Materials, J. Mater. Sci. 42 (2007) 1782-1796
    Abstract

  517. M. Kawasaki, C. Xu and T. Langdon: Extending Flow in High-Temperature Creep to Materials with Ultrafine Grain Sizes, Plasticity, Failure and Fatigue in Structural Materials-from Macro to Nano: Proceedings of the Hael Mughrabi Honorary Symposium, eds. K.J. Hsia, M. Göken, T. Pollock, P.D. Portella and N.R. Moody, TMS, 2008 55-62

  518. K.L. Kendig and D.B. Miracle: Strengthening Mechanisms of an Al-Mg-Sc-Zr Alloy, Acta Mater. 50 (2002) 4165-4175
    Abstract

  519. O. Kessler, C. Prinz, F. Hoffmann and P. Mayr: Age Hardening of Laser Beam Welded Aluminium Alloy 6082 using Scandium Containing Filler Metal, Mater. Sci. Techn. 18 (2002) 913-916
    Abstract

  520. G.M. Khan et al.: Influence of Scandium on Structure and Superplasticity of Al-Zn-Mg-Sc-Zr Alloys, Tsvetnye Metally 34 (11) (1993) 43-45

  521. M.L. Kharakterova, T.V. Dobatkina: Polythermal Sections of the Al-Cu-Sc System, Russ. Metall. (6) (1988) 175-178

  522. M.L. Kharakterova: Phase Composition of Al-Cu-Sc Alloys at Temperatures of 450 and 500°C, Russ. Metall. (4) (1991) 195-199

  523. M.L. Kharakterova et al.: Precipitation Hardening in Ternary Alloys of the Al-Sc-Cu and Al- Sc-Si Systems, Acta Metall. Mater. 42 (7) (1994) 2285-2290

  524. M.L. Kharakterova et al.: Effect of Scandium and Zirconium on Structure and Age Hardening of the Al-Mg-Si Alloys, Russ. Metall. (1) (1997) 104-109

  525. G.V. Kharina and V.P. Kochergin: Corrosion of Alloys of Aluminum with Zinc and Rare Earth Metals in Sodium Metavanadate Solutions, Protection of Metals 32 (1996) 134-136
    Abstract

  526. G.V. Kharina and V.P. Kochergin: Corrosion of Aluminum Alloys with Zinc and Rare-Earth Metals in Polyvanadate Solutions, Russ. J. Applied Chem. 69 (1996) 1576-1578

  527. G.V. Kharina, M.V. Kuznetsov and V.P. Kochergin: Mechanism and Kinetics of Anodic Dissolution of Aluminum and its Alloys with Zinc and Rare-Earths in a Sodium Polyvanadate Solution, Russ. J. Electrochem. 34 (1998) 482-485
    Abstract

  528. G.V. Kharina and V.P. Kochergin: Corrosion-Electrochemical Behavior of Al-Zn-REM Alloys in the Presence of Polyvanadate-Ions, Protection of Metals 37 (2001) 575-579
    Abstract

  529. I.M. Khatsinskaya et al.: The Structure and Phase Transformations in Al-Li-Mg Alloys Containing Zr and Sc, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. II, Atlanta, Georgia, USA 183-190

  530. L.B. Khokhlatova, J.N. Fridlyander, N.I. Kolobnev and Y.M. Dolzhanski: Ageing Behaviour and Tensile Properties of 1460 Alloy, Mater. Sci. Forum 217-222 (1996) 853-857
    Preview of 1st page

  531. L.B. Khokhlatova, L.B. Ber, A.A. Alekseev, N.I. Kolobnev, O.G. Ukolova and E.A. Lukina: Phase Transformation during Long-Term Low Temperature Exposure of 1424 Al-Li-Mg Alloy, Mater. Sci. Forum 396-402 (2002) 1395-1398
    Preview of 1st page

  532. L.B. Khokhlatova, A.A. Alekseev and E.A. Lukina: Heterogeneous Precipitation in 1424 Al-Mg-Li Alloy, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 711-717

  533. L.B. Khokhlatova, N.I. Kolobnev, I.N. Fridlyander, A.A. Alekseev, E.A. Lukina, L.B. Ber and G. Tempus: Anisotropy Decrease in Sheets of 1424 Al-Mg-Li Alloy, Mater. Sci. Forum 519-521 (2006) 371-376
    Preview of 1st page

  534. R. Kießling, P. Hübner, H. Biermann and A. Vinogradov: Fracture Behaviour of Ultrafine-Grained Materials under Static and Cyclic Load (abstract), Book of Abstracts of the Int. Conf. on Ultrafine Grained Materials - From Basics to Applications, Sept. 25-27 2006, Kloster Irsee, Germany, 3-12-3-13

  535. J.H. Kim, J.H. Kim, J.T. Yeom, D.-G. Lee, S.G. Lim and N.K. Park: Effect of Scandium Content on the Hot Extrusion of Al–Zn–Mg–(Sc) Alloy, J. Mater. Process. Techn. 187-188 (2007) 635-639
    Abstract

  536. M. Kim, Y. Hong and H. Cho: The Effects of Sc on the Microstructure and Mechanical Properties of Hypo-Eutectic Al-Si Alloys, Met. Mater. Intern. 10 (2004) 513-520

  537. M. Kim: Electron Back Scattering Diffraction (EBSD) Analysis of Hypereutectic Al-Si Alloys Modified by Sr and Sc, Met. Mater. Intern. 13 (2007) 103-107
    Available Online

  538. S.-H. Kim and K.H. Kim: Hot Compression Formability of Scandium-Containing 7XXX Aluminium Alloys, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1858-1863
    Abstract

  539. W.J. Kim, J.K. Kim, H.K. Kim, J.W. Park and Y.H. Jeong: Effect of Post Equal-Channel-Angular-Pressing Aging on the Modified 7075 Al Alloy Containing Sc, J. Alloys & Compounds 450 (2008) 222-228
    Abstract

  540. V.T. Klimov, I.B. Ginko, V.V. Sadkov, V.V. Kashirin and T.V. Krymova: Use of Aluminum-Lithium Alloys in Airplane Structures of the Tupolev Aviation Scientific and Technical Complex, Russ. J. Non-Ferrous Met. 38 (3) (1997) 70-74

  541. K.E. Knipling, D.C. Dunand and D.N. Seidman: Criteria for Developing Castable, Creep-resistant Aluminum-based Alloys – A Review, Z. Metallkd. 97 (2006) 321-324
    Abstract, Available Online

  542. K.E. Knipling and D.C. Dunand: Creep Resistance of Cast and Aged Al–0.1Zr and Al–0.1Zr–0.1Ti (at.%) Alloys at 300–400 °C, Scripta Mater. 59 (2008) 387-390
    Abstract

  543. K.E. Knipling, R.A. Karnesky, C.P. Lee, D.C. Dunand and D.N. Seidman: Precipitation Evolution in Al–0.1Sc, Al–0.1Zr and Al–0.1Sc–0.1Zr (at.%) Alloys during Isochronal Aging, Acta Mater. 58 (2010) 5184-5195
    Abstract, Available Online

  544. U. Koch, T. Pfannenmüller, V. Davydov, J.N. Fridlyander and P.-J. Winkler: Advanced Weldable High-Strength Al-Cu-Li Alloy for Aerospace Applications, Mater. Sci. Forum 242 (1997) 243-248
    Preview of 1st page

  545. O.K. Kolerov et al.: Distinctive Features of Primary Crystallization in Alloy 1570, Met. Sci. & Heat Tr. (12) (1994) 649-654

  546. O.K. Kolerov: Kinetics and Texture of Recrystallization in Aluminum Alloy Sheets of Different Thicknesses, Met. Sci. & Heat Tr. (3) (1997) 94-96

  547. N.I. Kolobnev et al.: Superplasticity of Al-Mg-Li System Alloys, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch- Partenkirchen, Germany, 1053-1056

  548. N.I. Kolobnev et al.: Aluminium-Lithium Alloys Based on the Al-Mg-Li-Zr-Sc System, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. II, Atlanta, Georgia, USA 305-312

  549. N.I. Kolobnev and L.B. Khokhlatova: Multy-Step Ageing Behavior of Al-Li Alloys, Proc. Materials Week 2001 October 1-4 2001, Munich, Germany
    Abstract

  550. N.I. Kolobnev: Aluminum-Lithium Alloys with Scandium, 44 (7) (2002) 297-299
    Abstract

  551. N.I. Kolobnev, L.B.Khokhlatova and I.N.Fridlyander: Aging of Al-Li Alloys Having Composite Particles of Hardening Phases, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 208-211

  552. N.I. Kolobnev, L.B. Khokhlatova, S.V. Samokhvalov, A.A. Alekseev, S.V. Sbitneva, T.I. Tararaeva and V.I. Popov: Heat Treatment Effect on Properties of Al-Mg-Si-Cu 1370 Alloy, Mater. Sci. Forum 519-521 (2006) 519-524
    Preview of 1st page

  553. N.I. Kolobnev, L.B. Khokhlatova, A.A. Alekseev, E.A. Lukina and S.V. Samokhvalov: An Effect of Chemical Composition and Heat Treatment on Phase Composition and Properties of Al-Cu-Li-Zn Alloy V-1461 with Zr, Sc Additives, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 234-240
    Abstract

  554. Yu. Kolobov, G. Grabovetskaya, K. Ivanov, M. Ivanov and E. Naidenkin: Diffusion and Plasticity of Submicrocrystalline Metals and Alloys, Solid State Phenomena 94 (2003) 35-40
    Preview of 1st page

  555. Yu.R. Kolobov, K.V. Ivanov, G.P. Grabovetskaya and E.V. Naidenkin: Diffusion-Controlled Processes and Plasticity of Submicrocrystalline Materials, Nanomaterials by Severe Plastic Deformation (Proc. NANOSPD2, Dec. 9-13 2002, Vienna, Austria), eds. M. Zehetbauer and R.Z. Valiev, Wiley VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, 2004, 722-727

  556. S.B. Komarov: Modification of the Structure of Aluminum-Lithium Alloy Ingots, Russ. J. Non-Ferrous Met. 37 (9) (1996) 59-63

  557. S.B. Komarov: Heredity in Aluminum/Lithium Alloy Ingot Production, Russ. J. Non-Ferrous Met. 40 (9) (1999) 60-62

  558. S. Komura, P.B. Berbon, M. Furukawa, Z. Horita, M. Nemoto and T.G. Langdon: High Strain Rate Superplasticity in an Al-Mg Alloy Containing Scandium, Scripta Mater. 38 (1998) 1851-1856
    Abstract

  559. S. Komura, P.B. Berbon, A. Utsunomiya, M. Furukawa, Z. Horita, M. Nemoto and T.G. Langdon: Superplasticity in an Ultrafine-Grained Al-Mg-Sc Alloy Produced by Equal-Channel Angular Pressing, Hot Deformation of Aluminum Alloys II eds. T.R. Bieler, L.A. Lalli and S.R. MacEwen, TMS, USA 1998 125-138

  560. S. Komura, Z. Horita, M. Furukawa, M. Nemoto and T.G. Langdon: Influence of Scandium on Superplastic Ductilities in an Al-Mg-Sc Alloy, J. Mater. Res. 15 (2000) 2571-2576
    Abstract

  561. S. Komura, M. Furukawa, Z. Horita, M. Nemoto and T. G. Langdon: Optimizing the Procedure of Equal-Channel Angular Pressing for Maximum Superplasticity, Mater. Sci. Eng. A 297 (2001) 111-118
    Abstract

  562. S. Komura, Z. Horita, M. Furukawa, M. Nemoto and T.G. Langdon: An Evaluation of the Flow Behavior during High Strain Rate Superplasticity in an Al-Mg-Sc Alloy, Metall. Mater. Trans. A 32A (2001) 707-716
    Abstract

  563. V.I. Kononenko, S.V. Golubev: Phase Diagrams of Binary Systems of Aluminum with La, Ce, Pr, Nd, Sm, Eu, Yb, Sc and Y, Russ. Metall. (2) (1990) 193-195

  564. A. Kostrivas and J.C. Lippold: Weldability of Li-bearing Aluminium Alloys, Int. Mater. Rev. 44 (1999) 217-237
    Abstract, Available Online

  565. A.D. Kostrivas and J.C. Lippold: Simulating Weld-Fusion Boundary Microstructures in Aluminum Alloys, JOM 56 (2) (2004) 65-72
    Preview of 1st page

  566. V. Kotroczo, I.J. McColm: Phases in Rapidly Cooled Scandium-Silicon Samples, J. Alloys & Compounds 203 (1994) 259-265

  567. B.Ya. Kotur, I.R. Mokra: Ternary Systems Sc-Y-Si and Sc-Lu-Si, Inorg. Mater. 30 (1994) 729-732

  568. B.Ya. Kotur: Crystal Chemistry of Ternary Intermetallic Compounds of Scandium with Transition Metals and Carbon, Silicon or Germanium, J. Alloys & Compounds 219 (1995) 88-92
    Abstract

  569. F.F. Kraft and C. Williams: The Effect of Scandium and Zirconium Additions on Aluminum Extrusion and Post-Braze Grain Structure, Proc. 9th International Aluminum Extrusion Technology Seminar, May 13-16 2008, Orlando, FL, USA, Vol. II, 101-110
    Abstract

  570. A.V. Krajnikov, Yu.V. Shmakov and G.E. Thompson: High Strength Weldable Al-Zn-Mg Base Alloys Produced by Water Atomisation, Mater. Sci. Techn. 19 (2003) 1207-1214
    Abstract

  571. L.S. Kramer et al.: Modification of Aluminum Alloys via Scandium Additions, Proceedings of Alumitech '97, May 19-23 1997, Atlanta, Georgia, USA 1231-1236

  572. L.S. Kramer et al.: Scandium in Aluminum Alloys, Adv. Mater. & Proc. (10) (1997) 23-24
    Abstract

  573. A.R. Krause, R.A. Chernenkoff and R.G. Davies: The Effect of Transition Metals on the Fatigue Response of a 5754 Type Alloy, Proc. Light Metals 1999, Eds. M. Bouchard and A. Faucher, August 22-26, 1999, Quebec City, Quebec, Canada 429-438

  574. A.R. Krause and R.A. Chernenkoff: The Effect of Large Zirconium Additions to a 5754 Alloy, Proc. Light Metals 2000, Eds. J. Kazadi and J. Masounave, August 20-23, 2000, Ottawa, Ontario, Canada 285-294

  575. S. Krause et.al.: Positron Studies of Annealing and Precipitation in Quenched Al-Sc(0.003-6 at%) Alloys, Mater. Sci. Forum 105-110 (1992) 1105-1108

  576. S. Krause et al.: Positron Lifetime Studies of Decomposition in Al-Li and Al-Li-(Cu, Mg or Sc) Alloys, Mater. Sci. Forum 105-110 (1992) 1109-1112

  577. S. Krause et al.: Defect Annealing and Decomposition in Quenched Al-Sc Alloys Studied by Positron Lifetime Measurements, Phys. Stat. Sol. (a) 141 (2) (1994) 311-316

  578. M.E. Krug, A. Werber, D.C. Dunand and D.N. Seidman: Core–Shell Nanoscale Precipitates in Al–0.06 at.% Sc Microalloyed with Tb, Ho, Tm or Lu, Acta Mater. 58 (2010) 134-145
    Abstract, Available Online

  579. A. Kumar, A.K. Mukhopadhyay and K.S. Prasad: Superplastic Behaviour of Al–Zn–Mg–Cu–Zr Alloy AA7010 containing Sc, Mater. Sci. Eng. A 527 (2010) 854–857
    Abstract

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  580. T.M. Labur and R.V. Ilyushenko: Effect of the Composition of Filler Wire on the Failure Resistance of Welded Joints in 01421 Aluminium-Lithium Alloy, Paton Weld. J. 4 (1992) 318-320

  581. T.M. Labur and R.V. Ilyushchenko: Effect of Scandium on the Mechanical Properties of Welded Joints in 1420 Aluminium Alloy, Paton Weld. J. 4 (1992) 630-631

  582. T.M. Labur: Examining the Efficiency of Hardening the Weld Metal with Scandium in Welding 1420 Aluminium-Lithium Alloy, Paton Weld. J. 8 (1996) 391-393

  583. T.M. Labur: Strength and Toughness of Metal of Welded Joints in Al-Li Alloys, Paton Weld. J. (3) (2003) 18-21

  584. T.M. Labur, A.Ya. Ishchenko, T.G. Taranova, V.A. Kostin, G.M. Grigorenko and A.A. Chajka: Influence of Thermophysical Conditions of Welding on Fracture Resistance of the HAZ Metal in the Joints of Aluminium Alloy V96tss, Paton Weld. J. (4) (2007) 25-30
    Abstract

  585. T.M. Labur, A.A. Grinyuk, T.G. Taranova, V.A. Kostin and A.G. Poklyatsky: Features of Micromechanism of Fracture in Joints of Aluminium-Lithium Alloys Produced by Plasma Welding, Paton Weld. J. (9) (2007) 11-16
    Abstract

  586. L. Lae, P.Guyot and C. Sigli: Cluster dynamics in AlZr and AlSc alloys, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 281-286

  587. L.K. Lamikhov and G.V. Samsonov: Modification of Aluminum and of Alloy AL7 by Transition Metals, Tsvetnye Metally 5 (8) (1964) 77-80

  588. T.G. Langdon, M. Furukawa, Z. Horita and M. Nemoto: Microstructural Evolution during Processing by Severe Plastic Deformation, Proc. NATO Advanced Research Workshop on Investigations and Applications of Severe Plastic Deformation, Moscow, August 2-7 1999, eds. T.C. Lowe and R.Z. Valiev, NATO Science Series, Series 3, High Technology, vol. 80 Kluwer Academic Publishers, The Netherlands, 2000, 149-154

  589. T.G. Langdon, M. Furukawa, M. Nemoto and Z. Horita: Using Severe Plastic Deformation for Grain Refinement and Superplasticity Mater. Sci. Forum 357-359 (2001) 489-498
    Preview of 1st page

  590. T.G. Langdon: Processing of Aluminum Alloys by Severe Plastic Deformation, Mater. Sci. Forum 519-521 (2006) 45-54
    Preview of 1st page

  591. P.Sh. Lantsman et al.: Effect of Alloying with Rare Earth Metals on the Recrystallization Temperature and Properties of Aluminum and an Alloy of the System Al-Cu-Mn, Met. Sci. & Heat Tr. (4) (1990) 285-288

  592. G. Lapasset, Y. Girard, M.H. Campagnac and D. Boivin: Investigation of the Microstructure and Properties of a Friction Stir Welded Al-Mg-Sc Alloy, Mater. Sci. Forum 426-432 (2003) 2987-2992
    Preview of 1st page

  593. S. Lathabai and P.G. Lloyd: The Effect of Scandium on the Microstructure, Mechanical Properties and Weldability of a Cast Al-Mg Alloy, Acta Mater. 50 (2002) 4275-4292
    Abstract

  594. M. Lech-Grega, A. Klyszewski, M. Opyrchal, W. Szymanski and J. Zelechowski: Characterization of the AlSi7 with Sc and Mg Sheets Use to Deep Drawing, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 2402-2408
    Abstract

  595. N. Lecoq, J. Boisse, R. Patte and H. Zapolsky: Coarsening Kinetic of Aluminium-Scandium and Aluminium-Zirconium-Scandium-Precipitates, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1270-1276
    Abstract

  596. E.W. Lee, J.J. Witters and J.E. Talia: Superplastic Characterization of 1420 and 1421 Al-Li Alloys, Light-Weight Alloys for Aerospace Applications II, Eds. E.W. Lee and N.J. Kim, The Minerals, Metals & Materials Society, 1991 203-215

  597. J. Lee, M. Kim and J. Hong: The Effect of Sc on the Modification of Eutectic Si in Al-Si Alloys, Proc. 66th World Foundry Congress, Istanbul, Turkey, Sept. 6-9 2004 103-114

  598. J.A. Lee and P.S. Chen: Aluminum-Scandium Alloys: Material Characterization, Friction Stir Welding, and Compatibility With Hydrogen Peroxide, NASA Technical Memorandum TM-2004-213604, December 2004
    Available Online

  599. S. Lee, H. Akamatsu, A. Utsunomiya, K. Neishi, M. Furukawa, Z. Horita and T.G. Langdon: Superplasticity of Ultrafine-Grained Al-Mg-Sc-Zr Alloys Produced by Equal-Channel Angular Pressing, Proc. Thermec 2000, Dec. 4-8 2000, Las Vegas, USA

  600. S. Lee, A. Utsunomiya, H. Akamatsu, K. Neishi, M. Furukawa, Z. Horita and T.G. Langdon: Influence of Scandium and Zirconium on Grain Stability and Superplastic Ductilities in Ultrafine-Grained Al-Mg Alloys, Acta Mater. 50 (2002) 553-564
    Abstract

  601. S. Lee, M. Furukawa, Z. Horita and T. G. Langdon: Developing a Superplastic Forming Capability in a Commercial Aluminum Alloy without Scandium or Zirconium Additions, Mater. Sci. Eng. A 342 (2003) 294-301
    Abstract

  602. W.B. Lee, C.Y. Lee, Y.M. Yeon, J.B. Lee, S.C. Chae and S.B. Jung, Grain Growth Behavior and Mechanical Properties of the Friction Stir Welded Zone of 7055 Al Alloy Followed by Post Weld Heat Treatment, Mater. Sci. Forum 539-543 (2007) 4087-4092
    Preview of 1st page

  603. W.-S. Lee and Y.-C. Lin: Strain Rate and Temperature Dependence of Dynamic Shear Properties of Al–Sc Alloy, Mater. Sci. Techn. 25 (2005) 571-582
    Abstract

  604. W.-S. Lee and Y.-C. Lin: Strain Rate and Temperature Dependence of Dynamic Shear Properties of Al–Sc Alloy, Mater. Sci. Techn. 22 (2006) 571-582
    Abstract

  605. W.-S. Lee and T.-H. Chen: Dynamic Mechanical Response and Microstructural Evolution of High Strength Aluminum-Scandium (Al-Sc) Alloy, Mater. Trans. 47 (2006) 355-363
    Abstract

  606. W.-S. Lee and T.-H. Chen: Rate-dependent Deformation and Dislocation Substructure of Al–Sc Alloy, Scripta Mater. 54 (2006) 1463-1468
    Abstract

  607. W.-S. Lee, T.-H. Chen and Q.-J. Gong: Dynamic Shear Behaviour of Unweldable Aluminum-Scandium (Al-Sc) Alloy, Mater. Trans. 48 (2007) 500-509
    Abstract

  608. W.S. Lee and T.H. Chen: Effects of Strain Rate and Temperature on Dynamic Mechanical Behaviour and Microstructural Evolution in Aluminium-Scandium (Al-Sc) Alloy, Mater. Sci. Techn. 24 (2008) 1271-1282
    Abstract

  609. W.-S. Lee and T.-H. Chen: Comparative Study of Dynamic Impact Properties and Microstructures of Weldable and Unweldable Aluminium-Scandium (Al-Sc) Alloys, Mater. Sci. Techn. 25 (2009) 711-725
    Abstract

  610. W.-S. Lee and T.-H. Chen: Impact Properties and Microstructural Evolution of Weldable and Unweldable Al-Sc Alloys, Aluminum Alloys: Fabrication, Characterization and Applications II, eds. W. Yin, S.K. Das and Z. Long, TMS, 2009 203-209

  611. W.-S. Lee, T.-H. Chen, C.-F. Lin and M.-S. Chen: Impact Deformation Behaviour and Dislocation Substructure of Al–Sc Alloy, J. Alloys & Compounds 493 (2010) 580–589
    Abstract

  612. W.-S. Lee, T.-H. Chen and G.-T. Lu: Adiabatic Shearing Behaviour of Unweldable Al-Sc Alloy under Extremely High Shear Loading, Mater. Sci. Techn. 26 (2010) 720-725
    Abstract

  613. W.-S. Lee, T.-H. Chen and G.-T. Lu: Adiabatic Shearing Localization of Al-Sc Alloy at Extremely High Strain Rate, TMS Annual Meeting 2010 Supplemental Proceedings vol. I: Materials Processing and Properties, TMS, 2010 145-150

  614. Y.Y. Lee and J.K. Kim: Improvement of Mechanical Property for 7xxx Al Alloy Containing Sc with High Strength by Two-Step Homogenization Treatment, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1668-1673
    Abstract

  615. B. Lenczowski et al.: Neue Aluminiumlegierungen für die Luftfahrt, Aluminium 73 (1997) 200-20

  616. B. Lenczowski, R. Rauh, D. Wieser, G. Tempus, G. Fischer, J. Becker, K, Folkers, R. Braun and G. Lütjering: Weldable AlMgSc Alloys for Transportation Technology, Aluminium 76 (2000) 350-356

  617. B. Lenczowski, T. Hack, D. Wieser, G. Tempus, G. Fischer, J. Becker, K. Folkers, R. Braun and G. Lütjering: AlMgSc Alloys for Transportation Technology, Mater. Sci. Forum 331-337 (2000) 957-963
    Preview of 1st page

  618. B. Lenczowski, V. Yelagin, R. Rauh, V. Zakharov and Y. Filatov: Novel Weldable Anti-Corrosive Aluminium-Magnesium Alloy Containing a High Amount of Magnesium, Especially for Use in Automobiles, World Patent WO 0011231, March 11 2000
    Available Online

  619. B. Lenczowski, R. Rauh, D. Wieser and G. Tempus: Weldable, Corrosion-Resistant AlMg Alloys, Especially for Manufacturing Means of Transportation, US Patent 6 258 318, July 10 2001
    Available Online

  620. B. Lenczowski, V. Yelagin, R. Rauh, V. Zakharov and Y. Filatov: Weldable Anti-Corrosive Aluminum-Magnesium Alloy Containing a High Amount of Magnesium, Especially for Use in Automobiles, US Patent 6 315 948, Nov. 13 2001
    Available Online

  621. B. Lenczowski: Neue Leichtmetalle im Flugzeugbau, Proc. Materials Week 2001 October 1-4 2001, Munich, Germany
    Abstract

  622. B. Lenczowski, V. Yelagin, R. Rauh, V. Zakharov and Y. Filatov: Weldable Anti-Corrosive Aluminium-Magnesium Alloy Containing a High Amount of Magnesium, Especially for Use in Aviation, World Patent WO 0011232, March 2 2002
    Available Online

  623. B. Lenczowski: New Lightweight Alloys for Welded Aircraft Structure, Proc. 23rd International Congress of Aeronautical Sciences, ICAS 2002, Sept. 8-13 2002 Toronto, Canada 4101.1-4101.4
    Available Online

  624. B. Lenczowski, V. Yelagin, R. Rauh, V. Zakharov and Y. Filatov: Weldable Anti-Corrosive Aluminium-Magnesium Alloy Containing a High Amount of Magnesium, Especially for Use in Aviation, US Patent 6 531 004 B1, March 11 2003
    Available Online

  625. P. Leo, E. Cerri, P.P. De Marco and H.J. Roven: Properties and Deformation Behaviour of Severe Plastic Deformed Aluminium Alloys, J. Mater. Process. Techn. 182 (2007) 207-214
    Abstract

  626. P. Li, Y. Ye and L. He: Valence Electron Structure Analysis of Refining Mechanism of Sc and Ti Additions on Aluminum, Chinese Sci. Bull. 54 (2007) 1782-1796
    Abstract

  627. Y. Li, Z. Liu, Q. Xia and Y. Liu: Grain Refinement of the Al-Cu-Mg-Ag Alloy with Er and Sc Additions, Metall. Mater. Trans. A 38A (2007) 2853-2858
    Abstract

  628. W. Liang, Q. Pan, Z. Zhu, Y. He and Y. Liu: Aging Behaviors of Al-Cu-Li-Zr Alloy Containing Sc, Trans. Nonferrous Met. Soc. China 15 (SPI/3) (2005)12-17

  629. W.-J. Liang, Q.-L. Pan, Y.-B. He, Z.-M. Zhu and Y.-F. Liu: Effect of Predeformation on Microstructure and Mechanical Properties of Al-Cu-Li-Zr Alloy Containing Sc, Mater. Sci. Techn. 23 (2007) 395-399
    Abstract

  630. H.A. Lipsitt and A.M. Sherman: Light-Weight Aluminum Alloy Design Methodology, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 385-389

  631. H.A. Lipsitt and A.M. Sherman: Lightweight Aluminum Alloy Design Methodology, Adv. Mater. & Proc. (10) (2001) 37-39
    Abstract

  632. V.V. Litovskii et al.: The Enthalpies of Formation of Liquid Aluminium-Scandium Alloys, Russ. J. Phys. Chem. 60 (9) (1986) 1385-1386

  633. L. Litynska, J. Dutkiewicz, H. Heinrich and G. Kostorz: Structure of Precipitates in Al-Mg-Si-Sc and Al-Mg-Si-Sc-Zr Alloys, Acta Metallurgica Slovaca 10 (2004) 514-519

  634. L. Litynska: Microstructure of Al-Mg-Si-Cu Alloys Modified with Scandium and Zirconium, Archives of Materials Science 26 (2005) 65-72

  635. L. Litynska, J. Dutkiewicz and K. Parlinski: Experimental and Theoretical Characterization of Al3Sc Precipitates in Al–Mg–Si–Cu–Sc–Zr Alloys, Z. Metallkd. 97 (2006) 321-324
    Abstract

  636. L. Litynska-Dobrzynska: Precipitation of Phases in Al-Mg-Si-Cu Alloy with Sc and Zr Additions during Heat Treatment, Solid State Phenomena 130 (2007) 163-166
    Preview of 1st page

  637. L. Litynska-Dobrzynska, J. Dutkiewicz, W. Maziarz and P. Ochin: Structure and Properties of Al-Mg-Si Alloys with Zr and Sc Additions Produced by Melt Spinning and Twin Rolling Casting Techniques, Kovove Mater. 48 (2010) 9-15
    Abstract

  638. F.C. Liu and Z.Y. Ma: Achieving Exceptionally High Superplasticity at High Strain Rates in a Micrograined Al–Mg–Sc Alloy produced by Friction Stir Processing, Scripta Mater. 59 (2008) 882-885
    Abstract

  639. F.C. Liu and Z.Y. Ma: Contribution of Grain Boundary Sliding in Low-Temperature Superplasticity of Ultrafine-Grained Aluminum Alloys, Scripta Mater. 62 (2010) 125-128
    Abstract

  640. J. Liu and D.J. Chakrabarti: Grain Structure and Microtexture Evolution During Superplastic Forming of a High Strength Al-Zn-Mg-Cu Alloy, Acta Mater. 44 (1996) 4647-4661
    Abstract

  641. J. Liu and F.H. (Sam) Froes: Aluminum Alloys for Aerospace Applications: A Review, Proc. Synthesis of Lightweight Metals III, eds. F.H. Froes, C.M. Ward-Close, P.G. McCormick and D. Eliezer, TMS (1999) 103-111

  642. J. Liu and M. Kulak: A New Paradigm in the Design of Aluminum Alloys for Aerospace Applications, Mater. Sci. Forum 331-337 (2000) 127-140
    Preview of 1st page

  643. Z. Liu, Z. Li, M. Wang and Y. Weng: Effect of Complex Alloying of Sc, Zr and Ti on the Microstructure and Mechanical Properties of Al–5Mg Alloys, Mater. Sci. Eng. A 483-484 (2008) 120-122
    Abstract

  644. D. Lohwasser: Thin Section Airframe Alloy Welding within WAFS, Mater. Sci. Forum 426-432 (2003) 2879-2884
    Preview of 1st page

  645. D.V. Louzguine, S. Sobu and A. Inoue: The Influence of Scandium in Effecting Fragile to Strong Glass Transition in Aluminium-based Alloys, Appl. Phys. Lett. 85 (2004) 3758-3759
    Abstract

  646. X. Lu and Y. Wang: Calculation of the Vibrational Contribution to the Gibbs Energy of Formation for Al3Sc, Calphad 26 (2002) 555-561
    Abstract

  647. V.I. Lukin: Effect of Alloying Elements Sc, Mn and Zr on Weldability of Alloys of the Al-Mg-Sc-Mn-Zr System, Weld. Inter. 10 (1996) 987-989

  648. V.I. Lukin et al.: Examination of the Weldability of Superlight Al-Mg-Li alloys, Weld. Inter. 11 (1997) 488-492

  649. B.H. Luo, Z.H. Bai and Y.Q. Xie: The Effects of Trace Sc and Zr on Microstructure and Internal Friction of Zn-Al Eutectoid Alloy, Mater. Sci. Eng. A 370 (2004) 172-176
    Abstract

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  650. Z.Y. Ma, F.C. Liu and R.S. Mishra: Superplastic Deformation Mechanism of an Ultrafine-Grained Aluminum Alloy Produced by Friction Stir Processing, Acta Mater. 58 (2010) 4693-4704
    Abstract

  651. R.E. Majewski, A.S. Edelstein, A.T. Aldred and A.E. Dwight: Susceptibility Measurements on the Valence Fluctuation System (Yb,Sc)Al3, J. Appl. Phys. 49 (1978) 2096-2097
    Abstract

  652. N.A. Makhmudova et al.: Effect of Alloying with Scandium on the Weldability of Al-6%Mg Alloy, Paton Weld. J. 3 (1991) 688-690

  653. P. Malek, M. Cieslar, P. Bartuska, I. Drbohlav: Superplastic Behaviour of the Al-Mg-Sc-Zr Alloy Processed by ECAP, Kovove Mater. 43 (2005) 245-257
    Abstract

  654. P. Málek, K. Turba, M. Cieslar, I. Drbohlav and T. Kruml: Structure Development during Superplastic Deformation of an Al-Mg-Sc-Zr Alloy, Mater. Sci. Eng. A 462 (2007) 95-99
    Abstract

  655. T.I. Malinkina, N.A. Markachev, V.A. Kovtun and N.M. Bukhanova: Welded Structures of 01570 Aluminium Alloy, Weld. Inter. 12 (1998) 566-569

  656. R.K.W. Marceau and M. Ferry: Hot Tensile Ductility and Dynamic Grain Growth in Submicron Al-Sc and Al-Mg-Sc Alloys, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 730-735

  657. L.I. Markashova, G.M. Grigorenko, A.Ya. Ishchenko, A.V. Lozovskaya, O.S. Kushnaryova, T.A. Alekseenko and A.A. Chajka: Effect of Scandium Additions on Structure-Phase Condition of Weld Metal Produced by Welding Aluminium Alloy 1460, Paton Weld. J. (1) (2006) 16-23
    Abstract

  658. L.I. Markashova, G.M. Grigorenko, A.Ya. Ishchenko, A.V. Lozovskaya and O.S. Kushnaryova: Effect of Scandium Additions on Fine Structure of Weld Metal in Aluminium Alloy 1460 Welded Joints, Paton Weld. J. (2) (2006) 20-25
    Abstract

  659. L.I. Markashova, G.M. Grigorenko, A.V. Lozovskaya, O.S. Kushnaryova and V.E. Fedorchuk: Effect of Scandium Additions on Structure-Phase State of Weld Metal in Aluminium Alloy Joints after Heat Treatment, Paton Weld. J. (6) (2006) 7-11
    Abstract

  660. M.V. Markushev and M. Yu. Murashkin: Evaluation of the Tensile Properties of Severely Deformed Commercial Aluminium Alloys, Proc. NATO Advanced Research Workshop on Investigations and Applications of Severe Plastic Deformation, Moscow, August 2-7 1999, eds. T.C. Lowe and R.Z. Valiev, NATO Science Series, Series 3, High Technology, vol. 80 Kluwer Academic Publishers, The Netherlands, 2000, 319-325

  661. M.V. Markushev and M.Yu. Murashkin: Strength of Submicrocrystalline Severly Deformed Commercial Aluminum Alloys, Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 371-380
    Abstract

  662. T. Marlaud, A. Deschamps, F. Bley, W. Lefebvre and B. Baroux: Influence of alloy composition and heat treatment on precipitate composition in Al–Zn–Mg–Cu alloys, Acta Mater. 58 (2010) 111-121
    Abstract

  663. T. Marlaud, A. Deschamps, F. Bley, W. Lefebvre and B. Baroux: Evolution of Precipitate Microstructures During the Retrogression and Re-ageing Heat Treatment of an Al–Zn–Mg–Cu Alloy, Acta Mater. 58 (2010) 4814-4826
    Abstract

  664. E.A. Marquis and D.N. Seidman: Nanoscale Structural Evolution of Al3Sc Precipitates in Al(Sc) Alloys, Acta Mater. 49 (2001) 1909-1919
    Abstract, Available Online

  665. E.A. Marquis, D.N. Seidman and D.C. Dunand: Creep of Precipitation-Strengthened Al(Sc) Alloys, Creep Deformation: Fundamentals and Applications, eds. R.S. Mishra, J.C. Earthman and S.V. Raj, 2002 TMS Annual Meeting, Seattle, Washington, Feb. 17-21 2002, 299-308
    Abstract

  666. E.A. Marquis and D.C. Dunand: Model for Creep Threshold Stress in Precipitation-Strengthened Alloys with Coherent Particles, Scripta Mater. 47 (2002) 503-508
    Abstract, Available Online

  667. E.A. Marquis and D.N. Seidman: A Subnanoscale Study of Mg Segregation at Al/Al3Sc Interfaces, Microsc. Microanal. 8 Suppl. 2 (2002) 1100CD-1101CD
    Abstract

  668. E.A. Marquis, D.N. Seidman and D.C. Dunand: Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys [Acta Materialia 50(16), pp. 4021-4035] (Erratum), Acta Mater. 51 (2003) 285-287
    Abstract, Available Online

  669. E.A. Marquis, D.N. Seidman and D.C. Dunand: Effect of Mg Addition on the Creep and Yield Behavior of an Al-Sc Alloy, Acta Mater. 51 (2003) 4751-4760
    Abstract, Available Online

  670. E.A. Marquis, D.N. Seidman, M.Asta, C. Woodward and V. Ozolins: Mg Segregation at Al/Al3Sc Heterophase Interfaces on an Atomic Scale: Experiments and Computations, Phys. Rev. Letters 91 (2003) 036101-1-4
    Abstract, Available Online

  671. E.A. Marquis, D.N. Seidman and D.C. Dunand: Microstructure and Creep of the Al-2Mg-0.2Sc Alloy, Hot Deformation of Aluminum Alloys III, eds. Z. Jin, A. Beaudoin, T.A. Bieler and B. Radhakrishnan, TMS, USA, 2003 177-184

  672. E.A. Marquis and D.N. Seidman: Nanostructural Evolution of Al3Sc Precipitates in an Al-Sc-Mg Alloy by Three-Dimensional Atom Probe Microscopy, Surf. Interface Anal. 36 (2004) 559-563
    Abstract, Available Online

  673. E.A. Marquis and D.N. Seidman: Coarsening Kinetics of Nanoscale Al3Sc Precipitates in an Al–Mg–Sc Alloy, Acta Mater. 53 (2005) 4259-4268
    Abstract, Available Online

  674. E.A. Marquis, D.N. Seidman, M. Asta and C. Woodward: Composition Evolution of Nanoscale Al3Sc Precipitates in an Al–Mg–Sc Alloy: Experiments and Computations, Acta Mater. 54 (2006) 119-130
    Abstract, Available Online

  675. E.A. Marquis, J.L. Riesterer, D.N. Seidman and D.J. Larson: Mg Segregation at Coherent and Semi-Coherent Al/Al3Sc Interfaces, Microsc. Microanal. 12 Suppl. S02 (2006) 914-915
    Available Online

  676. E.A. Marquis, B.P. Geiser, M. Hekmaty and D.J. Larson: Application of Spatial Distribution Mapping to the Investigation of Alloys, Microsc. Microanal. 13 Suppl. S02 (2007) 196-197
    Available Online

  677. E.A. Marquis and J.M. Hyde: Applications of Atom-Probe Tomography to the Characterisation of Solute Behaviours, Mater. Sci. Eng. R 69 (2010) 37–62
    Abstract

  678. L.F. Martynova et al.: Knight Shift in Certain Scandium Compounds, Phys. Met. Metall. 37 (1974) 169-170

  679. I.A. Mazurina, O.Sh. Sitdikov, and R.O. Kaybyshev: Evolution of the Microstructure of the Al-Mg-Sc Alloy upon Equal-Channel Angular Pressing Phys. Met. Metall. 94 (2002) 413-420
    Abstract

  680. L. Meng, X.L. Zheng: Overview of the Effects of Impurities and Rare Earth Elements in Al-Li Alloys, Mater. Sci. Eng. A237 (1997) 109-118
    Abstract

  681. W.S. Miller, P.C.M. de Haan, A. Haszler, A. Heinz, C. Keidel and H. Ghaziary: High Performance Material for Aerospace Applications, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 1985-1990

  682. Yu.V. Milman, D.V. Lotsko and O.I. Sirko: 'Sc Effect' of Improving Mechanical Properties in Aluminium Alloys, Mater. Sci. Forum 331-337 (2000) 1107-1111
    Preview of 1st page

  683. Yu.V. Milman, D.V. Lotsko, O.D. Neikov, A.I. Sirko, N.A. Yefimov, A.N. Bilous, D.B. Miracle and O.N. Senkov: Processing, Structure and Mechanical Behavior of Rapidly Solidified Aluminum Alloys Containing Quasicrystalline Particles, Mater. Sci. Forum 396-402 (2002) 723-728
    Preview of 1st page

  684. Y.V. Milman, A.I. Sirko, D.V. Lotsko, O.N. Senkov and D.B. Miracle: Microstructure and Mechanical Properties of Cast and Wrought Al-Zn-Mg-Cu Alloys Modified with Zr and Sc, Mater. Sci. Forum 396-402 (2002) 1217-1222
    Preview of 1st page

  685. Yu.V. Milman: High-Strength Aluminum Alloys, Proc. NATO Advanced Research Workshop on Metallic Materials with High Structural Efficiency, Kyiv, Ukraine, Sept. 7-13 2003, eds. O.N. Senkov, D.B. Miracle and S.A. Firstov, NATO Science Series II: Mathematics, Physics and Chemistry, Vol. 146, Kluwer Academic Publishers, The Netherlands, 2004 139-150

  686. Yu. Milman, D. Lotsko, A. Sirko, O. Neikov, N. Zakharova, V. Goncharuk, A. Koval, V. Voropaiev, A. Sharovski, O. Senkov and D. Miracle: Effect of Fe and Si on the Structure and Mechanical Properties of Complex Al-Zn-Mg-Cu Alloys Produced by P/M and Casting Techniques, Proc. NATO Advanced Research Workshop on Metallic Materials with High Structural Efficiency, Kyiv, Ukraine, Sept. 7-13 2003, eds. O.N. Senkov, D.B. Miracle and S.A. Firstov, NATO Science Series II: Mathematics, Physics and Chemistry, Vol. 146, Kluwer Academic Publishers, The Netherlands, 2004 163-168

  687. Yu.V. Milman: Scandium Effect on Increasing Mechanical Properties of Aluminum Alloys, High Temp. Mater. Process. 25 (2006) 1-10

  688. Yu.V. Milman: Structure and Mechanical Behavior of Al-Sc Alloys, Mater. Sci. Forum 519-521 (2006) 567-572
    Preview of 1st page

  689. Yu. Milman, A. Byakova, A. Sirko, S. Gnyloskurenko and T. Nakamura: Improvement of Structure and Deformation Behaviour of High Strength Al-Zn-Mg Foam, Mater. Sci. Forum 519-521 (2006) 573-578
    Preview of 1st page

  690. B.K. Min, H.W. Kim and S.B. Kang: Effect of Al3Sc Precipitate on the Microstructural Evolution during Accumulative Roll Bonding in Al–0.2 wt.% Sc Alloy, J. Mater. Process. Techn. 162-163 (2005) 355-361
    Abstract

  691. Y. Miura et al.: Yield Strength of an Al-Sc Alloy Containing Coherent Al3Sc Precipitates, Aspects of High Temperature Deformation and Fracture in Crystalline Materials, July 28-31 1993, Nagoya, Japan, 255-262

  692. Y. Miura et al.: Precipitation Hardening in an Al-2.4Li- 0.19Sc Alloy, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. II, Atlanta, Georgia, USA 161-168

  693. Y. Miura, T. Shioyama and D. Hara: Recrystallization of Al-3Mg and Al-3Mg-0.2Sc Alloys, Mater. Sci. Forum 217-222 (1996) 505-510
    Preview of 1st page

  694. Y. Miura, C.-H. Joh and T. Katsube: Determination of Vacancy-Sc Interacion Energy by Electrical Resistivity Measurements, Mater. Sci. Forum 331-337 (2000) 1031-1035
    Preview of 1st page

  695. Y. Miyake and T. Suganuma: Superplastic Aluminum Alloy and Process for Producing Same, US Patent 6 056 835, May 2 2000
    Available Online

  696. V.I. Moskvitin and S.V. Makhov: On the Possibility of Manufacturing Aluminum-Scandium Alloying Compounds in an Aluminum Electrolyzer, Russ. J. Non-Ferrous Met. 39 (7) (1998) 39-43

  697. M.G. Mousavi: Grain Refinement and Hot Cracking Resistance of Aluminium Weldments, Dr.Ing. Thesis, NTNU, Trondheim, Norway, 1999

  698. M.G. Mousavi, C.E. Cross and Ø. Grong: Effect of Scandium and Titanium-Boron on Grain Refinement and Hot Cracking of Aluminium Alloy 7108, Sci. Technol. Weld. Joining 4 (1999) 381-388
    Abstract

  699. T. Mukai, T.G. Nieh, H. Watanabe and K. Higashi: Microstructure and Superplastic Properties in an ECAE Al-4Mg-0.5Sc Alloy Processed at Elevated Temperatures, Mater. Sci. Forum 304-306 (1999) 109-114
    Preview of 1st page

  700. A.K. Mukhopadhyay, G.M. Reddy, K.S. Prasad, S.V. Kamat, A. Dutta and C. Mondal: Influence of Scandium Additions on the Microstructure and Properties of AA 7010 Alloy Sheets, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 63-71

  701. A.K. Mukhopadhyay and G.M. Reddy: Influence of Trace Addition of Ag on the Weldability of Al-Zn-Mg-Cu-Zr Base 7010 Alloy, Mater. Sci. Forum 396-402 (2002) 1665-1670
    Preview of 1st page

  702. A.K. Mukhopadhyay, K.S. Prasad, V. Kumar and S.V. Kamat: Influence of Small Additions of Sc and Ag on the Microstructure and Properties of Al Alloy 7017, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 793-798

  703. A.K. Mukhopadhyay, G.M. Reddy, K.S. Prasad, V.K. Varma and C.Mondal: Microstructure Property Relationships in a High Strength Al-Zn-Mg-Cu-Zr Alloy, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 883-888

  704. A.K. Mukhopadhyay, K.S. Prasad, V. Kumar, G.M. Reddy, S.V. Kamat and V.K.Varma: Key Microstructural Features Responsible for Improved Stress Corrosion Cracking Resistance and Weldability in 7xxx Series Al Alloys Containing Micro / Trace Alloying Additions, Mater. Sci. Forum 519-521 (2006) 315-320
    Preview of 1st page

  705. A.K. Mukhopadhyay, K.S. Prasad and A. Dutta: Influence of Scandium Addition on the High Temperature Compressive Strength of Aluminium Alloy 7010, Mater. Sci. Forum 519-521 (2006) 871-876
    Preview of 1st page

  706. A.K. Mukhopadhyay, A. Kumar and K.S. Prasad: Superplastic Behaviour of High Strength Al-Zn-Mg-Cu Alloys Containing Zr and Sc, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1782-1789
    Abstract

  707. A.C. Muñoz, G. Rückert, B. Huneau, X. Sauvage and S. Marya: Comparison of TIG Welded and Friction Stir Welded Al–4.5Mg–0.26Sc Alloy, J. Mater. Process. Techn. 197 (2008) 337-343
    Abstract

  708. J. Murken, O. Girard, R. Höhner, B. Skrotzki and G. Eggeler: On the Influence of Stress and Strain on the Coarsening of Precipitates in Al-Alloys under Creep Conditions, Mater. Sci. Forum 331-337 (2000) 1507-1512
    Preview of 1st page

  709. J. Murken, R. Höhner, B. Skrotzki and G. Eggeler: On the Effect of Combined Thermal and Mechanical Loading on the Microstructural Evolution of an Al-Mg-Li Alloy, Mater. Sci. Forum 396-402 (2002) 1291-1296
    Preview of 1st page

  710. J. Murken, R. Höhner and B. Skrotzki: Strain Path Dependence of the Precipitate Size Evolution of an Al-Mg-Li Alloy under Combined Thermal and Mechanical Loading, Mater. Sci. Eng. A 363 (2003) 159-170
    Abstract

  711. L.E. Murr, G. Sharma, F. Contreras, M. Guerra, S.H. Kazi, M. Siddique, R.D. Flores, D.J. Shindo, K.F. Soto, E.A. Trillo, C. Schmidt and J.C. McClure: Joining Dissimilar Aluminum Alloys and Other Metals and Alloys by Friction Stir Welding, Aluminum 2001 - Proc. of the TMS 2001 Aluminium Automotive and Joining Sessions, eds. S.K. Das, J.G. Kaufman and T.J. Lienert, TMS, 2001 197-211

  712. J.L. Murray: The Al-Sc (Aluminum-Scandium) System, J. Phase Equil. 19 (1998) 380-384
    Abstract

  713. F. Musin, R. Kaibyshev, Y. Motohashi, T. Sakuma and G. Itoh: High Strain Rate Superplasticity in an Al-Li-Mg Alloy Subjected to Equal-Channel Angular Extrusion, Mater. Trans. 43 (2002) 2370-2377
    Abstract

  714. F. Musin, R. Kaibyshev and Y. Motohashi: Superplasticity in a Commercial Al-Mg-Mn-Sc Alloy Subjected to Severe Plastic Straining, Hot Deformation of Aluminum Alloys III, eds. Z. Jin, A. Beaudoin, T.A. Bieler and B. Radhakrishnan, TMS, USA, 2003 221-230

  715. F. Musin, R. Kaibyshev, Y. Motohashi and G. Itoh: Superplastic Behavior and Microstructure Evolution in a Commercial Al-Mg-Sc Alloy Subjected to Intense Plastic Straining, Metall. Mater. Trans. A 35A (2004) 2383-2392
    Preview of 1st page

  716. F. Musin, R. Kaibyshev, Y. Motohashi and G. Itoh: High Strain Rate Superplasticity in a Commercial Al-Mg-Sc Alloy, Scripta Mater. 50 (2004) 511-516
    Abstract

  717. F. Musin, R. Kaibyshev, Y. Motohashi and G. Itoh: Superplastic Behaviour and Microstructure Evolution in a Commercial Ultra-Fine Grained Al-Mg-Sc Alloy, Mater. Sci. Forum 447-448 (2004) 417-422
    Preview of 1st page

  718. F. Musin, R. Kaibyshev, Y. Motohashi and G. Itoh: Achievement of Low Temperature Superplasticity in a Commercial Aluminium Alloy Processed by Equal-Channel Angular Extrusion, Mater. Sci. Forum 447-448 (2004) 465-470
    Preview of 1st page

  719. M.M. Myshlyaev, V.M. Fedorov, L.V. Fedorova and H.J. McQueen: Development of Rapidly-Solidified Aluminum-Transition Metal Alloys for Long-Term Work at Elevated Temperatures, Proc. Hot Workability of Steels and Light Alloys-Composites, Aug. 24-28 1996 Montreal, Quebec, Canada 77-88

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  720. E.V. Naidenkin, E.F. Dudarev, Yu.R. Kolobov, G.P. Bakach and T.G. Langdon: The Effect of Equal-Channel Angular Pressing on Structure-Phase Changes and Superplastic Properties of Al-Mg-Li Alloy, Mater. Sci. Forum 503-504 (2006) 983-988
    Preview of 1st page

  721. T. Nakamura, T. Matsuo, M. Ikeda and S. Komatsu: Effect of Scandium Addition on Aging Behavior of 6061 Aluminum Alloy, Adv. Mater. Res. 15-17 (2007) 7-12
    Preview of 1st page

  722. M. Nakayama, Y. Miura: The Effect of Scandium on the Age-Hardening Behavior of an Al- Cu Alloy, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. I, Atlanta, Georgia, USA 538-545

  723. M. Nakayama et al.: Precipitation of Al3Sc in Al-0.23 mass%Sc Alloy, J. Japan Inst. Metals 59 (5) (1995) 487-491

  724. M. Nakayama and Y. Miura: Effect of Sc Addition on the Age-Hardening and Precipitation Behavior of Al-2.5 mass%Cu Alloy, , J. Japan Inst. Light Metals 46 (1996) 275-279

  725. M. Nakayama et al.: Precipitation of Al3Sc in Al-0.23 mass%Sc Alloy, Mater. Trans., JIM 38 (1997) 852-857
    Abstract

  726. M. Nakayama, T. Okuyama and Y. Miura: Microstructure and Mechanical Properties of Al-2.5%Cu-0.23%Sc Alloy, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 517-522

  727. M. Nakayama, T. Okuyama and Y. Miura: Interaction between q'-Al2Cu and Al3Sc in the Heterogeneous Precipitation in an Al-Cu-Sc Alloy, Mater. Sci. Forum 331-337 (2000) 927-932
    Preview of 1st page

  728. A.V. Nasonov et al.: Wetting of Carbon by Melts of Aluminium with Rare-Earth Metals, Inorg. Mater. 24 (1988) 1711-1714

  729. M, Nastar and E. Clouet: Mean Field Theories for the Description of Diffusion and Phase Transformations Controlled by Diffusion, Phys. Chem. Chem. Phys. 6 (2004) 3611-3619
    Available Online

  730. O.P. Naumkin et al.: Phase Equilibrium Diagram and Properties of Aluminium-Scandium Alloys, Russ. Metall. (4) (1965) 128-136

  731. O.D. Neikov, Yu.V. Milman, D.B. Miracle, D.V. Lotsko, A.I. Sirko and N.A. Yefimov: Effect of Sc Alloying Additions on Structure and Mechanical Properties of PM and Cast High-Strength Al Alloys of Same Composition, Proc. EURO PM2001: 2001 European Congress and Exhibition on Powder Metallurgy, Nice, France, 22-24 Oct. 2001, Vol. 2 219-224

  732. O.D. Neikov, D.V. Lotsko, A.I. Sirko, A.V. Sameljuk, G.E. Thompson, N.P. Zakharova and N.A. Yefimov: Properties of Rapidly Solidified Powder Alloys of the Al-Zn-Mg System, Mater. Sci. Forum 396-402 (2002) 1223-1228
    Preview of 1st page

  733. O.D. Neikov, G.I. Vasilieva, A.V. Sameljuk and A.V. Krajnikov: Water Atomised Aluminium Alloy Powders, Mater. Sci. Eng. A 383 (2004) 7-13
    Abstract

  734. M. Nemoto, Z. Horita, M. Furukawa and T.G. Langdon: Microstructural Evolution for Superplasticity Using Equal-Channel Angular Pressing, Mater. Sci. Forum 304-306 (1999) 59-66
    Preview of 1st page

  735. V. Neubert, B. Smola, I. Stulíková, A. Bakkar and J. Reuter: Microstructure, Mechanical Properties and Corrosion Behaviour of Dilute Al–Sc–Zr Alloy Prepared by Powder Metallurgy, Mater. Sci. Eng. A 464 (2007) 358-364
    Abstract

  736. B. Nie, Z.-M. Yin, D.-P. Zhu, Y.-Y. Peng, F. Jiang and J.-W. Huang: Effect of Homogenization Treatment on Microstructure and Properties of Al-Mg-Mn-Sc-Zr Alloy, J. Cent. South Univ. Technol. 14 (2007) 452-455
    Abstract

  737. Z. Nie, T. Jin, J. Fu, G. Xu, J. Yang, J. Zhou and T. Zuo: Research on Rare Earth in Aluminum, Mater. Sci. Forum 396-402 (2002) 1731-1736
    Preview of 1st page

  738. Z. Nie, T. Jin, J. Zou, J. Fu, J. Yang and T. Zuo: Development on Research of Advanced Rare-Earth Aluminum Alloy, Trans. Nonferrous Met. Soc. China 13 (2003) 509-514
    Abstract

  739. Z.R. Nie, J.B. Fu, J.X. Zou, T.N. Jin, J.J. Yang, G.F. Xu, H.Q. Ruan and T.Y. Zuo: Advanced Aluminum Alloys Containing Rare-earth Erbium, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 197-201

  740. T.G. Nieh et al.: Subgrain Formation and Evolution During the Deformation of an Al-Mg-Sc Alloy at Elevated Temperatures, Scripta Mater. 36 (1997) 1011-1016
    Abstract

  741. T.G. Nieh, L.M. Hsiung, J. Wadsworth and R. Kaibyshev: High Strain Rate Superplasticity in a Continuously Recrystallized Al-6%Mg-0.3%Sc Alloy, Acta Mater. 46 (1998) 2789-2800
    Abstract

  742. Z.L. Ning, S. Guo, F.Y. Cao, G.J. Wang, Z.C. Li and J. F. Sun: Microstructural Evolution during Extrusion and ECAP of a Spray-Deposited Al–Zn–Mg–Cu–Sc–Zr Alloy, J. Mater. Sci. 45 (2010) 3023-3029
    Abstract

  743. H. Nishimura et al.: A Highly Reliable Via Filling Technology Using High-Temperature Al- Sc Alloy Sputter Deposition, International Electron Devices Meeting 1993, December 5-8 1993, Washington DC, USA 281-284

  744. A.F. Norman and P.B. Prangnell: The Effect of Scandium on the Solidification Behaviour of Aluminium Alloys, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 219-224

  745. A.F. Norman, P.B. Pragnell and R.S. McEwen: The Solidification Behaviour of Dilute Aluminium-Scandium Alloys, Acta Mater. 46 (1998) 5715-5732
    Abstract

  746. A.F. Norman, K. Hyde, F. Costello, S. Thompson, S. Birley and P.B. Prangnell: Examination of the Effect of Sc on 2000 and 7000 Series Aluminium Alloy castings: For Improvements in Fusion Welding, Mater. Sci. Eng. A 354 (2003) 188-198
    Abstract

  747. A.F. Norman, S.S. Birley and P.B. Pragnell: Development of New High Strength Al - Sc Filler Wires for Fusion Welding 7000 Series Aluminium Aerospace Alloys, Sci. Technol. Weld. Joining 8 (2003) 235-245
    Abstract

  748. A.F. Norman, N.P. Longfield, I. de Wit, C. Goos and S. Spangel: Laser Beam Welding of Advanced Aluminium Aircraft Alloys, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 2012-2017
    Abstract

  749. I.I. Novikov, O.E. Grushko: Hot Cracking Susceptibility of Al-Cu-Li and Al-Cu-Li-Mn Alloys, Mater. Sci. Techn. 11 (1995) 926-932

  750. G.M. Novotny and A.J. Ardell: Precipitation of Al3Sc in binary Al-Sc alloys, Mater. Sci. Eng. A 318 (2001) 144-154
    Abstract

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  751. V. Ocenasek and M. Slamova: Resistance to Recrystallization due to Sc and Zr Addition to Al-Mg Alloys, Mater. Charact. 47 (2001) 157-162
    Abstract

  752. V. Ocenásek, B. Smola, I. Stulíková and J. Pelcová: Structure and Properties of AlMg3 Alloy with Sc and Zr, Mater. Sci. Forum 539-543 (2007) 487-492
    Preview of 1st page

  753. M. Ocko, E. Babic, R. Krsmik, E. Girt and B. Leontic: Some Properties of AlSc Solid Solutions, J. Phys. F 6 (1976) 703-707
    Abstract

  754. M. Ocko et al.: Changes of the Lattice Parameter in Al 3d Alloys due to the Virtual Bound State, Solid State Comm. 18 (1976) 705-708

  755. Kh. O. Odinaev et al.: Phase Equilibrium Diagram of the Al-Mg-Sc System in 0-33.3at.% Sc at 673 K, Dokl. Akad. Nauk Tadzh. SSR 32 (1989) 37-38

  756. Kh. O. Odinaev et al.: Quasi-binary Sections and Liquidus Surface of the Al-Mg-Sc System, Russ. Metall. (4) (1991) 200-203

  757. S.-I. Ogawa, H. Nishimura: A Novel Al-Sc (Scandium) Alloy for Future LSI Interconnection, International Electron Devices Meeting 1991, December 8-11 1991, Washington DC, USA 277-280

  758. S. Ogawa, H. Nishimura and T. Yamada: Aluminum Interconnection, US Patent 5 759 868, June 2 1998
    Available Online

  759. S. Ogawa, H. Nishimura and T. Yamada: Aluminum Scandium Alloy Interconnection, US Patent 5 804 879, Sept. 8 1998
    Available Online

  760. K. Oh-ishi, Z. Horita, D.J. Smith and T.G. Langdon: Grain Boundary Structure in Al-Mg and Al-Mg-Sc Alloys after Equal-Channel Angular Pressing, J. Mater. Res. 16 (2001) 583-589
    Abstract

  761. H. Okamoto: Al-Sc (Aluminum-Scandium), J. Phase Equil. 12 (1991) 612-613

  762. H. Okamoto: Al-Sc (Aluminum-Scandium), J. Phase Equil. 21 (2000) 310
    Abstract

  763. K. Okayasu, H. Takekoshi and H. Fukutomi: Effect of Grain Boundary Migration on Texture Formation in Al-3mass%Mg Solid Solution during High Temperature Deformation, Mater. Sci. Forum 558-559 (2007) 551-556
    Preview of 1st page

  764. M. Oku, T. Shishido, Q. Sun, K. Nakajima, Y. Kawazoe and K. Wagatsuma: Comparison of Electronic Structures of ScAl3 and ScRh3: X-ray Photoelectron Spectroscopy and Ab Initio Band Calculation: J. Alloys & Compounds 358 (2003) 264-267
    Abstract

  765. D. Orlov, A. Reshetov, A. Synkov, V. Varyukhin, D. Lotsko, O. Sirko, N. Zakharova, A. Sharovsky, V. Voropaiev, Yu. Milman and S. Synkov: Twist Extrusion as a Tool for Grain Refinement in Al-Mg-Sc-Zr Alloys, Proc. NATO Advanced Study Institute on Nanostructured Materials by High-Pressure Severe Plastic Deformation, Donetsk, Ukraine, Sept. 22-24 2004, eds. Y.T. Zhu and V. Varyukhin, NATO Science Series II: Mathematics, Physics and Chemistry, Vol. 212, Springer, Dordrecht, The Netherlands, 2006, 77-82

  766. O.E. Osintsev, V.Yu. Konkevich and S.Ya. Betsofen: Hardening Mechanism in Melt-Quenched Al–Zn–Mg–(Cu) Alloys, Russ. Metall. (5) (2007) 433-438
    Abstract

  767. S. Ota, H. Akamatsu, K. Neishi, M. Furukawa, Z. Horita and T.G. Langdon: Low-Temperature Superplasticity in Aluminum Alloys Processed by Equal-Channel Angular Pressing, Mater. Trans. 43 (2002) 2364-2369
    Abstract

  768. V.V. Ovchinnikov, A.M. Drits and T.V. Krymova: Experience in Applications of Aluminum-Lithium Alloy 1460, Russ. J. Non-Ferrous Met. 38 (12) (1997) 31-37

  769. V.V. Ovchinnikov, A.M. Drits and T.V. Krymova: Technological Special Features of Production of Welded Aircraft Structures made of 1460 Aluminium-Lithium Alloy, Weld. Inter. 12 (1998) 489-492

  770. B.V. Ovsyannikov, V.I. Popov and V.M. Zamyatin: In Search of Ways to Increase Al-Li-Cu-Mg System Aluminum-Lithium Alloy Processing Ductility, Int. Aluminium J. 83 (3) (2007) 76-79

  771. B.V. Ovsyannikov, N.I. Kolobnev, A.I. Kozhekin and V.M. Zamyatin: Large-Sized Ingots Casting of Al-Mg-Si-Cu-Zn Alloys with Higher Hot Tearing Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 456-463
    Abstract

  772. V. Ozolins and M. Asta: Large Vibrational Effects upon Calculated Phase Boundaries in Al-Sc, Phys. Rev. Letters 86 (2001) 448-451
    Abstract

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  773. C.S. Paglia, K.V. Jata and R.G. Buchheit: A Cast 7050 Friction Stir Weld with Scandium: Microstructure, Corrosion and Environmental Assisted Cracking, Mater. Sci. Eng. A 424 (2006) 196-204
    Abstract

  774. F. Palm, P. Vermeer, W. von Bestenbostel, D. Isheim and R. Schneider: Metallurgical Peculiarities in Hyper-Eutectic AlSc and AlMgSc Engineering Materials Prepared by Rapid Solidification Processing, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 355-364
    Abstract

  775. A.B. Pandey, K.L. Kendig and D.B. Miracle: Development of a New Discontinuously Reinforced Aluminum for Space Applications, Affordable MMCs for High Performance Applications, eds. A. Pandey, K. Kendig, and T. Watson, 2001 TMS Fall Meeting, Indianapolis, Nov. 4-8 2001, 35-46
    Abstract

  776. A.B. Pandey: An Aluminium Based Alloy, Eurpoean Patent EP 1 439 239 A1, July 21 2004
    Available Online

  777. A.W. Pandey: An Aluminum Based Alloy Containing Sc, Gd and Zr, European Patent EP 1 788 102 A1, May 23 2007
    Available Online

  778. Sp.G. Pantelakis and N.D. Alexopoulos: Assessment of the Ability of Conventional and Advanced Wrought Aluminum Alloys for Mechanical Performance in Light-Weight Applications, Mater. & Design 29 (2008) 80-91
    Abstract

  779. C. Papastaikoudis, D. Papadimitropoulos: Influence of the Virtual Bound State on the Low- Field Hall Coefficient. II. Dilute Alloys of Sc, Ti, V, Co and Ni in Al, Phys. Rev. B 24 (1981) 3108-3114
    Abstract

  780. H.G. Paris, T.H. Sanders, Jr., and Y.W. Riddle: Assessment of Scandium Additions in Aluminum Alloy Design, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 499-504

  781. J.-W. Park, Y.-H. Chung and K.-H. Lee: Boss Formability of Nano-Structured Aluminum Alloys at Elevated Temperatures, Mater. Sci. Forum 519-521 (2006) 907-912
    Preview of 1st page

  782. K.-T. Park, D.-Y. Hwang, Y.-K. Lee, Y.-K. Kim and D.H. Shin: High Strain Rate Superplasticity of Submicrometer Grained 5083 Al Alloy containing Scandium Fabricated by Severe Plastic Deformation, Mater. Sci. Eng. A 341 (2003) 273-281
    Abstract

  783. K.-T. Park, Y.-J. Oh and D.H. Shin: High Strain Rate Superplasticity of Ultrafine Grained 5083 Al - 0.2 wt.% Sc Fabricated by ECAP, Mater. Sci. Forum 426-432 (2003) 2783-2788
    Preview of 1st page

  784. K.-T. Park, H.-J. Lee, C.S. Lee, W.J. Nam and D.H. Shin: Enhancement of High Strain Rate Superplastic Elongation of a Modified 5154 Al by Subsequent Rolling after Equal Channel Angular Pressing, Scripta Mater. 51 (2004) 479-483
    Abstract

  785. K.-T. Park, H.-J. Lee, C.S. Lee and D.H. Shin: Effect of Post-Rolling after ECAP on Deformation Behavior of ECAPed Commercial Al–Mg Alloy at 723 K, Mater. Sci. Eng. A 393 (2005) 118-124
    Abstract

  786. K.-T. Park, C.S. Lee and D.H. Shin: Superplastic Behavior of As-Equal Channel Angular Pressed 5083 Al and 5083 Al-0.2 Sc Alloys, Mater. Sci. Forum 475-479 (2005) 2937-2940
    Preview of 1st page

  787. K.-T. Park, C.S. Lee, Y.S. Kim and D.H. Shin: Superplastic Deformation of Ultrafine Grained Al Alloy Processed by ECAP and Post-Rolling, Mater. Sci. Forum 503-504 (2006) 119-124
    Preview of 1st page

  788. K.T. Park, E.G. Lee, W.J. Nam and Y.S. Lee: Coarse Second Phase Particle Size Distribution of UFG Al Alloys Processed by Severe Plastic Deformation: Effect on Cavitation during Superplastic Deformation, Mater. Sci. Forum 539-543 (2007) 2859-2864
    Preview of 1st page

  789. B.A. Parker, Z.F. Zhou: The Mechanical Properties of Aluminium Magnesium Scandium Alloys, Proceedings of the 3rd International Conference on Aluminium Alloys, June 22-26 1992, Vol.I, NTH, Trondheim, Norway 363-367

  790. B.A. Parker et al.: The Effect of Small Additions of Scandium on the Properties of Aluminium Alloys, J. Mater. Sci. 30 (1995) 452-458

  791. B.A. Parker: On the Contribution of Coherency Strains to the Strength of Alloys, Mater. Sci. Forum 189/190 (1995) 347-351
    Preview of 1st page

  792. B.E. Paton, A.Ya. Ishchenko, K.A. Yushchenko, A.G. Bratukhin, A.G. Vovnyanko, E.T. Vasilevskii and A.G. Molyar: Prospects for Using Welding in Construction of New Generation Aircraft, Paton Weld. J. 8 (1996) 343-344
    Abstract

  793. B.E. Paton: Problems and Advances in Welding at the Tranistion of the Centuries, Paton Weld. J. (7) (1999) 2-11

  794. B.E. Paton and A.A. Bondarev: State-of-the-Art and Advanced Technologies of Electron Beam Welding of Structures, Paton Weld. J. (11) (2004) 20-27

  795. A.D. Pelton and Y.-B. Kang: Modeling Short-Range Ordering in Solutions, Intern. J. Mater. Res. 98 (2007) 907-917
    Abstract

  796. Y. Peng, Z. Yin, J. Yang and Y. Du: Effect of Sc and Zr on the In-Plane Anisotropy of Al-Mg-Mn Alloy Sheets, Rare Metals 24 (2005) 229-234

  797. Y. Peng, Z. Yin, J. Yang and Y. Du: In-Plane Anisotropy of 1545 Aluminum Alloy Sheet, Trans. Nonferrous Met. Soc. China 15 (2005) 87-92

  798. Y. Peng, Z. Yin and S. Li: Evaluation of Pitting Corrosion of Al-Mg-Mn-Sc-Zr Alloy in EXCO Solution by EIS, Trans. Nonferrous Met. Soc. China 15 (2005) 1226-1230

  799. Y.-Y. Peng, Z.-M. Yin, B. Nie and T. Wang: Effect of Minor Sc and Zr on the Fatigue Properties of Al-Mg-Mn Alloy, Mater. Sci. Forum 546-549 (2007) 863-866
    Preview of 1st page

  800. Y.-Y. Peng, Z.-M. Yin, B. Nie and L. Zhong: Effect of Minor Sc and Zr on Superplasticity of Al-Mg-Mn Alloys, Trans. Nonferrous Met. Soc. China 17 (2007) 744-750
    Abstract

  801. V.N. Perevezentsev, V.N. Chuvildeev, V.I. Kopylov, A.N. Sysoev and T.G. Langdon: Developing High Strain Rate Superplasticity in Al-Mg-Sc-Zr Alloys using Equal-Channel Angular Pressing, Ann. Chim. Sci. Mat. 27 (3) (2002) 99-109
    Abstract

  802. V.N. Perevezentsev, V.N. Chuvil’deev, A.N. Sysoev, V.I. Kopylov and T.G. Langdon: Achieving High-Strain-Rate Superplasticity in Al-Mg-Sc-Zr Alloys after Severe Plastic Deformation, Phys. Met. Metall. 94 Suppl. 1 (2002) S45-S53
    Abstract

  803. V.N. Perevezentsev, V.N. Chuvil’deev, V. I. Kopylov, A.N. Sysoev and T.G. Langdon: High-Strain-Rate Superplasticity of Al-Mg-Sc-Zr Alloys, Russ. Metall. (1) (2004) 28-35
    Abstract

  804. M. Perez, M. Dumont and D. Acevedo-Reyes: Implementation of Classical Nucleation and Growth Theories for Precipitation, Acta Mater. 56 (2008) 2119-2132
    Abstract

  805. V.A. Perfilev et al.: Rapid Titrimetric Determination of Scandium in Aluminium Alloys, Ind. Lab. 62 (1996) 151

  806. T. Pfannenmüller, E. Loechelt, P.-J. Winkler, S.M. Mozharovskij, D.S. Galkin, E.G. Tolchennikova, V.M. Chertovikov, V.G. Davydov, E.N. Kablov, L.B. Khokhlatova, N.I. Kolobnev and I.N. Fridlyander: Aluminium Based Alloy and Method for Subjecting it to Heat Treatment, World Patent WO 9915708, Apr. 1 1999
    Available Online
    Addendum to World Patent WO 9915708, Apr. 14 1999
    Available Online

  807. T. Pfannenmuller, E. Loechelt, P.-J. Winkler, S.M. Mozharovskij, D.S. Galkin, E.G. Tolchennikova, V.M. Chertovikov, V.G. Davydov, E.N. Kablov, L.S. Khokhlatova, N.I. Kolobnev and I.N. Fridlyander: Aluminum-based Alloy and Procedure for its Heat Treatment, US Patent 6 461 566, October 8 2002
    Available Online

  808. M.A. Phillips, B.M. Clemens and W.D. Nix: High Strength Nanoscale Al/Al3Sc Multilayers Formed by Interface Reaction, Mat. Res. Soc. Symp. Proc. 727 (2002) 65-70

  809. M.A. Phillips, B.M. Clemens and W.D. Nix: A Model for Dislocation Behavior during Deformation of Al/Al3Sc (fcc/L12) Metallic Multilayers, Acta Mater. 51 (2003) 3157-3170
    Abstract

  810. M.A. Phillips, B.M. Clemens and W.D. Nix: Microstructure and Nanoindentation Hardness of Al/Al3Sc Multilayers, Acta Mater. 51 (2003) 3171-3184
    Abstract

  811. M.A. Phillips, B.M. Clemens and W.D. Nix: Mechanical Properties of Al/Al3Sc Metallic Multilayers - Deformation Mechanisms at the Nanoscale, Mater. Sci. Forum 426-432 (2003) 3373-3378
    Preview of 1st page

  812. A. Pisch, J. Gröbner and R. Schmid-Fetzer: Application of Computational Thermochemistry to Al and Mg Alloy Processing with Sc Additions, Mater. Sci. Eng. A 289 (2000) 123-129
    Abstract, Online Manuscript

  813. A. Pisch, F. Hodaj, P. Chaudouët and C. Colinet: Standard Enthalpies of Formation of some Mn-Y and Mn-Sc Intermetallic Compounds, J. Alloys & Compounds 319 (2001) 210-213
    Abstract

  814. Yu. M. Platov, M.N. Pletnev: Phase Instability of Alloys Caused by Transmutation Effects During Neutron Irraditation, J. Nucl. Mater. 211 (1994) 95-100

  815. A.V. Poida, V.V. Brukhovetskii, R.I. Kuznetsova, V.F. Klepikov, D.L. Voronov and T.B. Lyubitskaya: Structural Changes in the Aluminum-Lithium Alloy 1460 upon High-Temperature Superplastic Deformation, Phys. Met. Metall. 99 (2005) 217-222
    Abstract

  816. Yu.A. Pokhil et al.: Mechanical Properties of Scandium-Alloyed Aluminium Alloys and their Welded Joints at Cryogenic Temperatures, Advances in Cryogenic Engineering (Materials) 42 (1996) 271-276

  817. A.G. Poklyatsky, A.Ya. Ishchenko, A.A. Grinuyk, A.A. Chajka and V.E. Fedorchuk: Non-Consumable Electrode Argon-arc Welding of Aluminium Alloys with Arc Oscillations, Paton Weld. J. (2) (2002) 18-22
    Abstract

  818. A.G. Poklyatsky, A.V. Lozovskaya, A.A. Grinyuk, M.R. Yavorskaya and A.A. Chajka: Improvement of Weld Strength in Arc Welding of Al-Cu Alloys with Application of Sc-containing Fillers, Paton Weld. J. (2) (2006) 26-29
    Abstract

  819. A.G. Poklyatsky, A.Ya. Ishchenko and M.R. Yavorskaya: Strength of Joints on Sheet Aluminuim Alloys Produced by Friction Stir Welding, Paton Weld. J. (9) (2007) 42-45
    Abstract

  820. I.J. Polmear: Control of Precipitation Processes and Properties in Aged Aluminium Alloys by Trace Element Additions, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 75-86

  821. D.P. Pope: Deformation and Fracture of Intermetallic Compounds Having the L12 Crystal Structure, Ordered Intermetallics - Physical Metallurgy and Mechanical Behavior, eds. C.T. Liu, R.W. Cahn and G. Sauthoff, 23-28 June 1991, Irsee, Germany 143-153

  822. P.S. Popel et al.: Influence of Scandium on the Properties of Liquid Aluminium, Russ. Metall. (3) (1983) 38-43

  823. P.B. Prangnell, Y. Huang, M. Berta and P.J. Apps: Mechanisms of Formation of Submicron Grain Structures by Severe Deformation, Mater. Sci. Forum 550 (2007) 159-168
    Preview of 1st page

  824. K.S. Prasad, A.K. Mukhopadhyay and V.A. Joshi: On the Microstructure developed in As-Cast and Homogenized 7010 Aluminium Alloy containing Scandium, Z. Metallkd. 95 (2004) 1046-1052
    Abstract

  825. V.J. Prasad and S.S. Bhattacharya: Development of Superplasticity in an Al-Mg-Sc Alloy, Aluminum Alloys for Transportation, Packaging, Aerospace and Other Applications, eds. S.K. Das and W. Yin, TMS, 2007 91-100

  826. C. Prinz, N. Sotirov, O. Keßler and F. Hoffmann: Thermische Nachbehandlung der Laserstrahl-geschweißten Al-Legierung AlSi1MgMn, Härterei-Technische Mitteilungen 59 (1) (2004) 45-50
    Abstract

  827. W. Prukkanon, S. Chanpum and C. Limmaneevichitr: Effect of Sc on Precipitation Hardening of AlSi6Mg Alloy, J. Mater. Sci. Technol. 24 (2008) 17-20
    Abstract, Available Online

  828. I.N. Pyagai, A.V. Vakhobov: Enthalpy of Formation of Aluminides in the Al-Sc System, Russ. Metall. (5) (1990) 50-52

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  829. M.Z. Quadir, O. Al-Buhamad, L. Bassman and M. Ferry: Development of a Recovered/Recrystallized Multilayered Microstructure in Al Alloys by Accumulative Roll Bonding, Acta Mater. 55 (2007) 5438-5448
    Abstract

  830. M.Z. Quadir, O. Al-Buhamad and M. Ferry: Processing of Multi-Layered Al-Al(Sc) Hybrid Sheet by Accumulative Roll Bonding, Mater. Sci. Forum 558-559 (2007) 307-312
    Preview of 1st page

  831. M.Z. Quadir, M. Ferry, O. Al-Buhamad and P.R. Munroe: Shear Banding and Recrystallization Texture Development in a Multilayered Al Alloy Sheet produced by Accumulative Roll Bonding, Acta Mater. 57 (2009) 29-40
    Abstract

  832. M.Z. Quadir, O. Al-Buhamad, K.D. Lau, R. Quarfoth, L. Bassman, P.R. Munroe and M, Ferry: The Effect of Initial Microstructure and Processing Temperature on Microstructure and Texture in Multilayered Al/Al(Sc) ARB Sheets, Int. J. Mat. Res. 100 (2009) 1705-1714
    Abstract

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  833. O.P. Rachek: X-ray Diffraction Study of Amorphous Alloys Al–Ni–Ce–Sc with using Ehrenfest’s Formula, J. Non-Cryst. Sol. 352 (2006) 3781-3786
    Abstract

  834. V. Radmilovic, A. Tolley, E.A. Marquis, M.D. Rossell, Z. Lee and U. Dahmen: Monodisperse Al3(LiScZr) Core/Shell Precipitates in Al Alloys, Scripta Mater. 58 (2008) 529-532
    Abstract

  835. V. Raghavan: Al-Cu-Mg-Sc-Zn-Zr (Aluminum-Copper-Magnesium-Scandium-Zinc-Zirconium), J. Phase Equilib. Diff. 28 (2007) 226-227
    Abstract, Available Online

  836. V. Raghavan: Al-Mg-Sc (Aluminum-Magnesium-Scandium), J. Phase Equilib. Diff. 28 (2007) 471-472
    Abstract

  837. V. Raghavan: Al-Cr-Sc (Aluminum-Chromium-Scandium), J. Phase Equilib. Diff. 28 (2007) 544-546
    Abstract

  838. V. Rajinikanth, V. Jindal, V.G. Akkimardi, M. Ghosh and K. Venkateswarlu: Transmission Electron Microscopy Studies on the Effect of Strain on Al and Al–1% Sc Alloy, Scripta Mater. 57 (2007) 425-428
    Abstract

  839. V. Rajinikanth, G. Arora, N. Narasaiah and K. Venkateswarlu: Effect of Repetitive Corrugation and Straightening on Al and Al–0.25Sc Alloy, Mater. Lett. 62 (2008) 301-304
    Abstract

  840. P.N. Raju, K.S. Rao, G.M. Reddy, M. Kamaraj and K.P. Rao: Microstructure and High Temperature Stability of Age Hardenable AA2219 Aluminium Alloy Modified by Sc, Mg and Zr Additions, Mater. Sci. Eng. A 464 (2007) 192-201
    Abstract

  841. N. Ramanaiah, K.S. Rao, B. Guha and K.P. Rao: Effect of Modified AA4043 Filler on Partially Melted Zone Cracking of Al-alloy Gas Tungsten Arc Welds, Sci. Technol. Weld. Joining 10 (2005) 591-596
    Abstract

  842. K.P. Rao, N. Ramanaiah and N. Viswanathan: Partially Melted Zone Cracking in AA6061 Welds, Mater. & Design 29 (2008) 179-186
    Abstract

  843. K.S. Rao, P.S. Rao, G.M. Reddy and K.P. Rao: Effect of Filler Wire on Pitting Corrosion Resistance of AA2219 Alloy TIG Welds (abstract), Trans. Indian Institute of Metals 56 (5) (2003) A54

  844. K.S. Rao, P.N. Raju, G.M. Reddy, M. Kamaraj and K.P. Rao: Microstructure and High Temperature Strength of Age Hardenable AA2219 Aluminium Alloy Modified by Sc, Mg and Zr Additions, Mater. Sci. Techn. 25 (2009) 92-101
    Abstract

  845. S.R.K. Rao, G.M. Reddy, K.S. Rao, P.S. Rao, M. Kamaraj and K.P. Rao: Gas Tungsten Arc Welded AA 2219 Alloy using Scandium Containing Fillers - Mechanical and Corrosion Behavior, Trans. Indian Inst. Met. 57 (2004) 451-459
    Available Online

  846. S.R.K. Rao, G.M. Reddy, P.S. Rao, M. Kamaraj and K.P. Rao: Improving Mechanical Properties of 2219 Aluminium Alloy GTA Welds by Scandium Addition, Sci. Technol. Weld. Joining 10 (2005) 418-426
    Abstract

  847. S.R.K, Rao, B.K. Devi, K.S. Rao and K.P. Rao: Thermo-Mechanical Treatments of Sc- and Mg-modified Al–Cu Alloy Welds, Int. J. Adv. Manuf. Technol. 45 (2009) 836-841
    Abstract

  848. A.H. Ratner, M.B. Geilikman, S.V. Aleksandrovski, F. Jiang, H. Li and Z. Yin: Thermodynamic Calculation on Metallic Thermoreduction during Preparation of Aluminum-Rare Master Alloys, Trans. Nonferrous Met. Soc. China 11 (2001) (1) 18-21
    Abstract

  849. G.M. Raynaud: Procédé Permettant de Diminuer le Taux de Recristallisation de l'aluminium et de ses Alliages, FR Patent 2 637 914, Oct. 17. 1988

  850. V.N. Rechkin et al.: Crystal Structures of some Scandium Aluminides, Sov. Phys. Crystall. 9 (1964) 325-327

  851. G.M. Reddy, A.K. Mukhopadhyay and A.S. Rao: Influence of Scandium on Weldability of 7010 Aluminium Alloy, Sci. Technol. Weld. Joining 10 (2005) 432-441
    Abstract

  852. C. Reeb, H. Zak and B. Tonn: Alloy Development for Drive Train Applications, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 121-126
    Abstract

  853. K.-H. Rendigs: Aluminium Structures Used in Aerospace - Status and Prospects, Mater. Sci. Forum 242 (1997) 11-23
    Preview of 1st page

  854. E.A. Repnikova et al.: Influence of Electron Irradiation on Decomposition of Alloy Al-Mg-Sc, Phys. Met. Metall. 57 (3) (1984) 103-106

  855. P. Riani, L. Arrighi, R. Marazza, D. Mazzone, G. Zanicchi and R. Ferro: Ternary Rare-Earth Aluminum Systems With Copper: A Review and a Contribution to Their Assessment, J. Phase Equil. & Diff. 25 (2004) 22-52
    Abstract

  856. Y.W. Riddle, H.G. Paris and T.H. Sanders, Jr.: Control of Recrystallization in Al-Mg-Sc-Zr Alloys, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 1179-1184

  857. Y.W. Riddle and T.H. Sanders, Jr.: Recrystallization Performance of AA7050 Varied with Sc and Zr, Mater. Sci. Forum 331-337 (2000) 799-803
    Preview of 1st page

  858. Y.W. Riddle and T.H. Sanders, Jr.: Contribution of Al3Sc to Recrystallization Resistance in Wrought Al-Sc Alloys, Mater. Sci. Forum 331-337 (2000) 939-944
    Preview of 1st page

  859. Y.W. Riddle, M. McIntosh and T.H. Sanders, Jr.: Improving Recrystallization Resistance in Wrought Aluminum Alloys with Scandium Addition, Lightweight Alloys for Aerospace Application VI, eds. K. Jata, E.W. Lee, W. Frazier and N.J. Kim, TMS, 2001 25-39
    Abstract

  860. Y.W. Riddle, H. Hallem and N. Ryum: Highly Recrystallization Resistant Al-Mn-Mg Alloys Using Sc and Zr, Mater. Sci. Forum 396-402 (2002) 563-568
    Preview of 1st page

  861. Y.W. Riddle and T.H. Sanders, Jr.: A Study of Coarsening, Recrystallization, and Morphology of Microstructure in Al-Sc-(Zr)-(Mg) Alloys, Metall. Mater. Trans. A 35A (2004) 341-350
    Preview of 1st page

  862. Y.W. Riddle and J. Røyset:
    Preserving Properties at High Temperature in Aluminum Alloys,
    TMS Letters 1 (2004) 81-82

  863. S. Ringeval, D. Piot, C. Desrayaud and J.H. Driver: Texture and Microtexture Development in an Al–3Mg–Sc(Zr) Alloy Deformed by Triaxial Forging, Acta Mater. 54 (2006) 3095-3105
    Abstract

  864. S. Ringeval and J. H. Driver: A Comparison of Flow Stress and Microstructure Development of Al Alloys in Plane Strain Compression and Multiple Forging, Mater. Sci. Forum 519-521 (2006) 979-984
    Preview of 1st page

  865. S. Ringeval, D. Piot and J.H. Driver: Microtexture Development and Flow Stress Saturation during Triaxial Forging of an Al-3Mg-Sc(Zr) Alloy, Mater. Sci. Forum 546-549 (2007) 793-800
    Preview of 1st page

  866. S. Ringeval and J.H. Driver: Multiple Forging Textures and Microstructures in Al Alloys, Mater. Sci. Forum 550 (2007) 181-190
    Preview of 1st page

  867. J.D. Robson, M.J. Jones and P.B. Prangnell: Extension of the N-model to Predict Competing Homogeneous and Heterogeneous Precipitation in Al-Sc Alloys, Acta Mater. 51 (2003) 1453-1468
    Abstract

  868. J.D. Robson and J.P. Suni: An Integrated Model for Dispersoid Formation in High Strength Aluminium Alloys, Metallurgical Modeling for Aluminum Alloy, eds. M. Tiryakioglu and L.A. Lalli, ASM International, OH, USA, 2003, 95-103
    Online Manuscript

  869. J.D. Robson: A New Model for Prediction of Dispersoid Precipitation in Aluminium Alloys containing Zirconium and Scandium, Acta Mater. 52 (2004) 1409-1421
    Abstract, Online Manuscript

  870. J.D. Robson, B.J. McKay and C. P. Heason: Modelling Dispersoid Precipitation and Recrystallization in Scandium and Zirconium Containing Aluminium Alloys, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 913-918

  871. J.D. Robson: Modelling Dispersoid Precipitation in Scandium Containing Aluminium Alloys, Mater. Sci. Forum 539-543 (2007) 386-391
    Preview of 1st page

  872. J.D. Robson, P.B. Prangnell, B.J. McKay and C.P. Heason: Modelling the Precipitation of Al3X Dispersoids in Aluminium Alloys and their Effect on Recrystallization, Mater. Sci. Forum 550 (2007) 45-54
    Preview of 1st page

  873. O. Roder, O. Schauerte, G. Lütjering and A. Gysler: Correlation Between Microstructure and Mechanical Properties of Al-Mg Alloys Without and With Scandium, Mater. Sci. Forum 217-222 (1996) 1835-1840
    Preview of 1st page

  874. O. Roder et al.: Fatigue Properties of Al-Mg Alloys With and Without Scandium, Mater. Sci. Eng. A234-236 (1997) 181-184
    Abstract

  875. C.L. Rohrer, M.D. Asta, S.M. Foiles and R.W. Hyland, Jr.: A Kinetic Model of Precipitate Evolution, Mat. Res. Soc. Symp. Proc. 398 (1996) 477-482

  876. M.D. Röhrle: Lightweigth Structures of the Future, Aluminium 80 (2004) 1076-1080

  877. L.L. Rokhlin et al.: Formation of Grain Boundaries of a Single Phase Liquid Solution in the Al-Mg-Sc-Zr System, Russ. Metall. (6) (1991) 146-148

  878. L.L. Rokhlin et al.: Structure of the Phase Equilibrium Diagrams of Aluminum Alloys with Scandium, Powder Met. & Met. Cer. 36 (1997)

  879. L.L. Rokhlin, T.V. Dobatkina, N.R. Bochvar and E.V. Lysova: Investigation of Phase Equilibria in Alloys of the Al-Zn-Mg-Cu-Zr-Sc System, J. Alloys & Compounds 367 (2004) 10-16
    Abstract

  880. L.L. Rokhlin, I.G. Korol’kova and T.V. Dobatkina: Study of Phase Equilibria and Hardening in Al-Rich Al-Zn-Sc Alloys during Aging, Russ. Metall. (4) (2004) 376-379
    Abstract

  881. L.L. Rokhlin, N.R. Bochvar, E.V. Lysova and N.P. Leonova: Scandium and Yttrium Solubilities in an Aluminum-Based Solid Solution at 500 and 600°C, Russ. Metall. (2) (2006) 180-184
    Abstract

  882. L.L. Rokhlin, T.V. Dobatkina, M.N. Bolotova and I.G. Korolkova: Phase Compositions of Al-Rich Al–Cr–Sc Alloys at 640 and 600°C, Russ. Metall. (4) (2006) 363-367
    Abstract

  883. L.L. Rokhlin, T.V. Dobatkina and N.R. Bochvar: Phase equilibria in Al-rich Al-Sc-Cr alloys, Russ. Metall. (1) (2007) 79-84
    Abstract, Available Online

  884. L.L. Rokhlin, T.V. Dobatkina, N.R. Bochvar, E.V. Lysova, and I. E. Tarytina: Effect of Yttrium and Chromium on the Recrystallization of Al–Sc Alloys, Russ. Metall. (4) (2007) 335-339
    Abstract

  885. T.D. Rostova and V.V. Zakharov: Shear Bands in Aluminum Lithium Alloys, Met. Sci. & Heat Tr. (6) (1997) 236-239

  886. T.D. Rostova and V.V. Zakharov: Anisotropy of Mechanical Properties of Al-Li Alloy Sheets, Russ. J. Non-Ferrous Met. 38 (8) (1997) 59-64

  887. T.D. Rostova and V.G. Davydov, V.I. Yelagin and V.V. Zakharov: Effect of Scandium on Recrystallization of Aluminum and its Alloys, Mater. Sci. Forum 331-337 (2000) 793-798
    Preview of 1st page

  888. R. Roumina, C.W. Sinclair and F. Fazeli: Precipitation and Recrystallization in an Al-Mg-Sc Alloy, Mater. Sci. Forum 519-521 (2006) 1647-1652
    Preview of 1st page

  889. R. Roumina and C.W. Sinclair: Effect of Recovery on the Tensile Response of an Al-Mg-Sc Alloy, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1443-1448
    Abstract

  890. R. Roumina and C.W. Sinclair: Recovery Kinetics in the Presence of Precipitates: The Softening Response of an Al–Mg–Sc Alloy, Acta Mater. 58 (2010) 111-121
    Abstract

  891. H.J. Roven, H. Nesboe, J.C. Werenskiold and T. Seibert: Mechanical Properties of Aluminium Alloys Processed by SPD: Comparison of Different Alloy Systems and Possible Product Areas, Mater. Sci. Eng. A 410-411 (2005) 426-429
    Abstract

  892. J. Røyset and N. Ryum: Precipitation and Recrystallization of an Al-Mg-Sc Alloy, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. I, Atlanta, Georgia, USA 194-201

  893. J. Røyset and N. Ryum: Precipitation Kinetics and Mechanisms in a Binary Al-Sc Alloy, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 793-798

  894. J. Røyset, H. Hovland and N. Ryum: An Investigation of Dilute Al-Sc-Si Alloys, Mater. Sci. Forum 396-402 (2002) 619-624
    Preview of 1st page

  895. J. Røyset, U. Tundal, S.R. Skjervold, G. Waterloo, C. Braathen and O. Reiso: An Investigation of Sc Addition on the Extrudability, Recrystallisation Resistance and Mechanical Properties of a 6082- and a 7108-Alloy, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 246-251

  896. J. Røyset and Y.W. Riddle: The Effect of Sc on the Recrystallisation Resistance and Hardness of an Extruded and Subsequently Cold Rolled Al-Mn-Mg-Zr Alloy Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 1210-1215

  897. J. Røyset and N. Ryum: Scandium in Aluminium Alloys, Intern. Mater. Rev. 50 (2005) 19-44
    Abstract, Available Online

  898. J. Røyset and N. Ryum: Kinetics and Mechanisms of Precipitation in an Al–0.2 wt.% Sc Alloy, Mater. Sci. Eng. A 396 (2005) 409-422
    Abstract, Available Online

  899. J. Røyset and N. Ryum: Some Comments on the Misfit and Coherency Loss of Al3Sc Particles in Al–Sc Alloys, Scripta Mater. 52 (2005) 1275-1279
    Abstract, Available Online

  900. J. Røyset, J.R. Leinum, H.G. Øverlie and O. Reiso: An Investigation of the Solubility of Scandium in Iron-Bearing Constituent Particles in Aluminium Alloys, Mater. Sci. Forum 519-521 (2006) 531-536
    Available Online

  901. J. Røyset: Scandium in Aluminium Alloys Overview: Physical Metallurgy, Properties and Applications, Metall. Sci. Techn. 25 (2007) (2) 11-21
    Available Online

  902. J. Røyset, N. Ryum, D. Bettella, A. Tocco, Z. Jia, J.K. Solberg and O. Reiso: On the Addition of Precipitation- and Work-Hardening in an Al–Sc Alloy, Mater. Sci. Eng. A 483-484 (2008) 175-178
    Abstract, Available Online

  903. V.I. Ryazantsev and V.A. Fedoseev: Arc Welding Structures of 1420 Aluminium Alloy, Weld. Inter. 9 (1995) 311-315

  904. V.I. Ryazantsev and V.A. Fedoseev: Mechanical Properties of Welded Joints in Aluminium Alloys of the Al-Cu System, Weld. Inter. 9 (1995) 566-569

  905. V.I. Ryazantsev and V.A. Fedoseev: Technology of Arc-Welding Aluminium Alloys Containing Lithium, Weld. Inter. 10 (1996) 983-986

  906. V.I. Ryazantsev and V.A. Fedoseev: Effect of the Arc Welding Conditions and the Composition of Filler Wire on the Mechanical Properties of Welded Joints in Aluminium Alloys, Weld. Inter. 11 (1997) 995-998

  907. N. Ryum: Structure and Properties of Al-Sc Alloys, Proc. Leghe di Alluminio per i Mezzi di Trasporto June 3, 1994, Ancona, Italy, 7-20

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  908. A. Saccone, G. Cacciamani, D. Macciò, G. Borzone and R. Ferro: Contribution to the Study of the Alloys and Intermetallic Compounds of Aluminium with the Rare-Earth Metals, Intermetallics 6 (1998) 201-215
    Abstract

  909. K. Sadayappan, G. Gegel, D. Weiss and M. Sahoo: Development of an Aluminum Alloy for Elevated Temperature Applications, Shape Casting: The 3rd International Symposium, eds. J. Campbell, P.N. Crepeau and M. Tiryakiogly, TMS, 2009 203-209

  910. G. Sakai, Z. Horita and T.G. Langdon: An Evaluation of Superplastic Anisotropy after Processing by Equal-Channel Angular Pressing, Mater. Trans. 45 (2004) 3079-3081
    Abstract

  911. G. Sakai, Z. Horita and T.G. Langdon: Grain Refinement and Superplasticity in an Aluminum Alloy Processed by High-Pressure Torsion, Mater. Sci. Eng. A 393 (2005) 344-351
    Abstract

  912. G. Sakai, K. Nakamura, Z. Horita and T.G. Langdon: Developing High-Pressure Torsion for Use with Bulk Samples, Mater. Sci. Eng. A 406 (2005) 268-273
    Abstract

  913. G. Sakai, K. Nakamura, Z. Horita and T.G. Langdon: Application of High Pressure Torsion to Bulk Samples, Mater. Sci. Forum 503-504 (2006) 391-396
    Preview of 1st page

  914. G.A. Salishchev et al.: Superplasticity of Aluminium Alloys with Ultrafine Grained Structure, Proceedings of the Second International Conference on Aluminium Alloys, October 9-13 1990, Beijing, China 413-415

  915. A.V. Sameljuk, O.D. Neikov, A.V. Krajnikov, Yu.V. Milman and G.E. Thompson: Corrosion Behaviour of Powder Metallurgical and Cast Al-Zn-Mg Base Alloys, Corros. Sci. 46 (2004) 147-158
    Abstract, Available Online

  916. N. Sandberg and R. Holmestad: First-Principles Calculations of Impurity Diffusion Activation Energies in Al, Phys. Rev. B 73 (2006) 014108-1-5
    Abstract

  917. N. Sano et al.: Precipitation Process of Al-Sc Alloys, Journal de Physique 48 C6 (1987) 337-342

  918. N. Sano, H.-H. Jo, , K.-I. Hirano and T. Sakurai: Precipitation Study of an Al-0.25 mass%Sc Alloy, , J. Japan Inst. Metals 39 (1989) 444-450

  919. N. Sano et al.: Precipitation Study of an Al-0.25 wt.% Sc Alloy, Proceedings of the Second International Conference on Aluminium Alloys, October 9-13 1990, Beijing, China 549-554

  920. R. Sauermann, B. Friedrich, M. Bünck, A. Bührig-Polaczek and P.J. Uggowitzer: Semi-Solid Processing of Tailored Aluminium-Lithium Alloys for Automotive Applications Adv. Eng. Mater. 9 (2007) 253-258
    Available Online

  921. E.M. Savitsky, V.F. Terehova, I.V. Burov and O.P. Naumkin: Study of Rare Earth Crystals and Alloys, Proc. Fourth Conference on Rare Earth Research, ed. L. Eyring, April 22-25 1964, Phoenix, Arizona, USA 409-420

  922. E.M. Savitskii, V.F. Terekhova, I.V. Burov, O.P. Naumkin and I.A. Markova: Alloys and Compounds of the Rare Earth Metals, Inorg. Mater. 1 (1965) 1503-1512

  923. R.R. Sawtell, P.E. Bretz and C.L. Jensen: Superplastic Aluminum Alloys Containing Scandium, US Patent 4 689 090, Aug. 25 1987
    Available Online

  924. R.R. Sawtell and J.W. Morris, Jr.: Exploratary Alloy Development in the System Al-Sc-X, Dispersion Strengthened Aluminium Alloys, January 25-29 1988, Phoenix, Arizona, USA 409-420

  925. R.R. Sawtell, P.E. Bretz and C.L. Jensen: Superplastic Aluminum Products and Alloys, US Patent 4 874 440, Oct. 17, 1989
    Available Online

  926. R.R. Sawtell and C.L. Jensen: Mechanical Properties and Microstructures of Al-Mg-Sc Alloys, Metall. Trans. A 21A (1990) 421-430

  927. R. Schmid-Fetzer, J. Gröbner and D. Kevorkov: Gezielte Entwicklung von Magnesiumlegierungen mittels angewandter Thermochemie, Mat.-wiss. u. Werkstofftech. 32 (2001) 13-19
    Available Online

  928. U. Schmidt, A.L. Beresina, K.V. Chuistov, T.A. Monastyrskaja and A.D. Rud: Decomposition of Rapidly Quenched Supersaturated Al - Sc - X (X: Li, Ta, Ti) Alloys, Proc. NATO-conference on Advanced Light Alloys and Composites,1997, Advanced Study Institute, Zakopane, Poland

  929. U. Schmidt, A.L. Beresina and A.D. Rud: The Decomposition Process in Rapidly Quenched AlLiSc - Alloys, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 787-792

  930. U. Schmidt and B. Schmidt: Modelling of the Transition Kinetics in Al-Alloys, Mater. Sci. Forum 331-337 (2000) 889-900
    Preview of 1st page

  931. J.H. Schneibel and E.P. George: Microstructure, Compression and Fracture Behavior of Al3Sc, Scripta Metall. Mater. 24 (1990) 1069-1074

  932. J.H. Schneibel and P.M. Hazzledine: The Crystallography of Cleavage Fracture in Al3Sc, Mat. Res. Soc. Symp. Proc. 213 (1991) 323-328

  933. J.H. Schneibel and P.M. Hazzledine: The Crystallography of Cleavage Fracture in Al3Sc, J. Mater. Res. 7 (1992) 868-875
    Abstract

  934. A. Schulz, K. Schimanski and P. Mayr: Spray Forming of Scandium Containing Al-Cu-Alloys, Proc. Int. Conf. On Spray Deposition and Melt Atomisation (SDMA 2000), Bremen, Germany, June 26 - 28 2000 vol. 1, 243-256

  935. G.O. Schumann and R.C. Calcraft: Weldability of High Strength Aluminium-Scandium Alloys, Australasian Weld. J. 46 (2001) 46-47

  936. J.C. Schuster and J. Bauer: The Ternary Systems Sc-Al-N and Y-Al-N, J. Less-Common Met. 109 (1985) 345-350

  937. G.D. Scott, B.S. Shabel and A. Morales: Aluminum Alloy Suitable for Pistons, US Patent 5 162 065, Nov. 10 1992
    Available Online

  938. D.N. Seidman, E.A. Marquis and D.C. Dunand: Precipitation Strengthening at Ambient and Elevated Temperatures of Heat-Treatable Al(Sc) Alloys, Acta Mater. 50 (2002) 4021-4035
    Abstract, Available Online

  939. D.N. Seidman: Three-Dimensional Atom-Probe Tomography: Advances and Applications, Annu. Rev. Mater. Res. 37 (2007) 127–158
    Available Online

  940. E.I. Selnikhina, L.I. Kaigorodova and A.A. Tkachenko: The Formation of the Grain Boundary Structure, Aging Behavior and Mechanical Properties of Al-Zn-Mg-Cu Alloy, Mater. Sci. Forum 294-296 (1999) 707-710
    Preview of 1st page

  941. R. Sen, S. Kaiser, M.K. Mitra and M.K. Banerjee: Plane Strain Fracture Toughness of Scandium Doped Al–6Mg Alloy, J. Alloys & Compounds 457 (2008) 135-143
    Abstract

  942. O.G. Senatorova, A.N. Uksusnikov, J.N. Fridlyander, J. Koshorst, R.R. Romanova, N.A. Ryazanova, A. Galliot and V.V. Cherkassov: TEM Study of Precipitation in High-Strength 1987 Alloy Sheets after Superplastic Forming, Proceedings of the 6th International Conference on Aluminum Alloys, July 5-10 1998, Toyohashi, Japan 589-593

  943. O.G. Senatorova, A.N. Uksusnikov, S.F. Lehoshina, I.N. Fridlyander and I.P. Zhegina: Influence of Different Minor Additions on Structure and Properties of High-Strength Al-Zn-Mg-Cu Alloy Sheets, Mater. Sci. Forum 331-337 (2000) 1249-1253
    Preview of 1st page

  944. O.N. Senkov, D.B. Miracle, Y.V. Milman, J.M. Scott, D.V. Lotsko and A. Sirko: Low Temperature Mechanical Properties of Scandium-Modified Al-Zn-Mg-Cu Alloys, Mater. Sci. Forum 396-402 (2002) 1127-1132
    Preview of 1st page

  945. O.N. Senkov, R.B. Bhat and S.V. Senkova: High Strength Aluminum Alloys for Cryogenic Applications, Proc. NATO Advanced Research Workshop on Metallic Materials with High Structural Efficiency, Kyiv, Ukraine, Sept. 7-13 2003, eds. O.N. Senkov, D.B. Miracle and S.A. Firstov, NATO Science Series II: Mathematics, Physics and Chemistry, Vol. 146, Kluwer Academic Publishers, The Netherlands, 2004 151-162

  946. O.N. Senkov, R.B. Bhat, S.V. Senkova, J. Tatalovich: Effect of Sc and Heat Treatment on Microstructure and Properties of a 7XXX DC Cast Alloy, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 501-506

  947. O.N. Senkov, R.B. Bhat, S.V. Senkova and J.D. Schloz: Microstructure and Properties of Cast Ingots of Al-Zn-Mg-Cu Alloys Modified with Sc and Zr, Metall. Mater. Trans. A 36A (2005) 2115-2126
    Preview of 1st page

  948. O.N. Senkov, S.V. Senkova, M.G. Mendiratta and D.B. Miracle: Method of Making a High Strength Aluminum Alloy Composition, US Patent 7 048 815, May 23 2006
    Available Online

  949. O.N. Senkov, S.V. Senkova, M.G. Mendiratta, D.B. Miracle, Y.V. Milman, D.V. Lotsko and A.I. Sirko: High Strength Aluminum Alloy Composition, US Patent 7 060 139, June 13 2006
    Available Online

  950. S.V. Senkova, R.B. Bhat and O.N. Senkov: Microstructure and Tensile Properties of Developmental Al-Zn-Mg-Cu Cast Alloys Modified with Sc And Zr, 6th Global Innovations Symposium on Materials Processing, eds. T.R. Bieler, J.W. Sears, J.E. Carsley, H.L. Fraser and J.E. Smugeresky, TMS, 2005 245-250

  951. S.V. Senkova, O.N. Senkov and D.B. Miracle: Cryogenic and Elevated Temperature Strengths of an Al-Zn-Mg-Cu Alloy Modified with Sc and Zr, Metall. Mater. Trans. A 37A (2006) 3569-3575
    Preview of 1st page

  952. K.N. Sergeev, T.V. Krymova, A.M. Dritz and S.G. Bulgakova: High-Strength Weldable Aluminum-Lithium Alloy 1460 in Multipurpose Aerospace Systems, Russ. J. Non-Ferrous Met. 39 (12) (1998) 25-28

  953. P.C. Seshagiri, B.S. Nair, G.M. Reddy, K.S. Rao, S.S. Bhattacharya and K.P. Rao: Improvement of Mechanical Properties of Aluminium–Copper Alloy (AA2219) GTA Welds by Sc Addition, Sci. Technol. Weld. Joining 13 (2008) 146-158
    Abstract

  954. O.A. Setyukov and J.N. Fridlyander: Stress Relaxation in Al Alloys of Al-Mg-Mn, Al-Mg-Sc and Al-Mg-Li-Systems, Mater. Sci. Forum 331-337 (2000) 1381-1385
    Preview of 1st page

  955. M. Shagiev, Y. Motohashi, F. Musin, R. Kaibyshev and G. Itoh: Superplastic Behavior in Al-Li-Mg-Cu-Sc Alloy Sheet, Mater. Trans. 44 (2003) 1694-1697
    Abstract

  956. M. Shagiev, Y. Motohashi, F. Musin, R. Kaibyshev and G. Itoh: Superplastic Response of an Advanced Al-Li-Mg-Cu-Sc Alloy Subjected to Intense Plastic Deformation, Mater. Trans. 44 (2003) 1698-1701
    Abstract

  957. M.R. Shagiev, Y. Motohashi, F.F. Musin, R.O. Kaibyshev and O.Sh. Sitdikov: High Strain Rate Superplastic Behavior of Al-Li-Mg-Cu-Sc Alloy Subjected to Severe Plastic Deformation, Proc. NATO Advanced Research Workshop on Metallic Materials with High Structural Efficiency, Kyiv, Ukraine, Sept. 7-13 2003, eds. O.N. Senkov, D.B. Miracle and S.A. Firstov, NATO Science Series, Series II, Mathematics, Physics and Chemistry, Vol. 146, Kluwer Academic Publishers, The Netherlands, 2004, 189-194

  958. R.E. Shalin et al.: Design and Fabrication of Large Structures of Aluminium-Lithium Alloys for Aerospace Technology, Weld. Inter. 11 (1997) 387-392

  959. A.M. Shammazov, N.K. Tsenev, R.Z. Valiev, M.M. Myshlyaev, M.M. Bikbulatov and S.P. Lebedich: High-Strain-Rate Superplasticity of Commercial Grade 1421 and 1460 Aluminum Alloys, Phys. Met. Metall. 89 (3) (2000) 314-318
    Abstract

  960. V.F. Shamrai, O.E. Grushko, I.V. Egiz and S. N. Borovskikh, Crystallographic Texture and Structure of Rolled Al–Cu–Li Alloy Sheets, Russ. Metall. (2) (2006) 176-179
    Abstract

  961. M.M. Sharma, M.F. Amateau and T.J. Eden: Hardening Mechanisms of Spray Formed Al–Zn–Mg–Cu Alloys with Scandium and Other Elemental Additions, J. Alloys & Compounds 416 (2006) 135-142
    Abstract

  962. M.M. Sharma, M.F. Amateau and T.J. Eden: Corrigendum to “Hardening Mechanisms of Spray Formed Al–Zn–Mg–Cu Alloys with Scandium and Other Elemental Additions” [J. Alloys Compd. 416 (2006) 135–142], J. Alloys & Compounds 493 (2010) 707
    Abstract

  963. V.G. Shevchenko et al.: Effect of Sc, La and Sm on the Oxidation of Aluminum, Inorg. Mater. 22 (1986) 205-208

  964. I.N. Shiganov, S.V. Shakhov, L.V. Tarasenko and A.I. Plokhikh: Examination of the effect of the Speed of Laser Welding on the Structure and Properties of Aluminium Alloys Alloyed with Lithium and Scandium, Weld. Intern. 19 (2005) 982-986

  965. D.H. Shin, D.-Y. Hwang, Y.-J. Oh and K.-T. Park: High-Strain-Rate Superplastic Behavior of Equal-Channel Angular-Pressed 5083 Al-0.2 Wt Pct Sc, Metall. Mater. Trans. A 35A (2004) 825-837
    Preview of 1st page

  966. G.L. Shneider et al.: Stability of Supersaturated Solid Solution of Al-Mg-Li Alloy with Sc Addition, Tsvetnye Metally 34 (3) (1993) 44-46

  967. G.L. Shneider, A.M. Drits: Hardenability of Aluminum-Lithium Alloys, Met. Sci. & Heat Tr. (9) (1995) 373-377

  968. G.L. Shneider: Phase Transformations in Heat Treatment of Al-Li Alloys and Optimization of Operational Properties of Semifinished Products from these Alloys, Met. Sci. & Heat Tr. 40 (1) (1998) 27-33

  969. G.L. Shneider, L.M. Sheveleva and V.V. Kafelnikov: Delayed Fracture of Aluminum Alloys, Met. Sci. & Heat Tr. 41 (3) (1999) 109-116

  970. A.B. Shubin, L.F. Yamshchikov, S.P. Yatsenko, S.S. Zobnin and O.B. Yakovlev: Thermodynamic Properties of Intermetallides in the Sc-Al System, Russ. Metall. (6) (1999) 145-147

  971. A.B. Shubin and K.Yu. Shunyaev: Thermodynamic Properties of Liquid Sc-Al Alloys: Model Calculations and Experimental Data, J. Phys.: Conf. Series 98 (2008) 032017
    Abstract, Available Online

  972. E.I. Shvechkov, T.D. Rostova and V.V. Zakharov: Study of Anisotropy of Mechanical Properties of Alloy 1424 Sheets, Russ. J. Non-Ferrous Met. 41 (4) (2000) 95-102

  973. E.I. Shvechkov, T.D. Rostova, V.V. Zakharov and A.V. Demidenkov: Cyclic Endurance of Sheets from Alloy 1424 with Different Thicknesses, Met. Sci. & Heat Tr. 43 (4) (2001) 148-151

  974. C. Sigli: Zirconium Solubility in Aluminum Alloys, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 1353-1358

  975. V.I. Silaeva, B.A. Prusakov and G.I. Eskin: Effect of Microalloying on the Structure and Properties of Alloys in the Al-Si-Cu System, Met. Sci. & Heat Tr. 42 (6) (2000) 241-245

  976. O. Simmich, J. Król, O. Kabisch, J. Dutkiewicz and R. Ciach: The Effect of Scandium on the Structure of Precipitates in AlLiCu Alloys, Mater. Sci. Forum 217-222 (1996) 845-850
    Preview of 1st page

  977. D. Simonovic and M.H.F. Sluiter: Predicting the Benefits of Adding Ternary Elements to Al-Sc Alloys, Mater. Res. Soc. Symp. Proc. 979 (2007) 0979-HH11-35
    Abstract, Available Online

  978. J. Singh, S.K. Rattan and S. Prakash: Electric Field Gradient in Transitional Dilute Alloys, Hyperfine Interactions 35 (1987) 685-689
    Abstract

  979. V. Singh and A.A. Gokhale: Control of Grain Structure through Transition Elemental Additions in an Al-Li Base Alloy, Mater. Sci. Forum 331-337 (2000) 477-482
    Preview of 1st page

  980. V. Singh, K.S. Prasad and A.A. Gokhale: Solidification Structure of Aluminium with Trace Additions of Sc and Zr, Int. J. Cast Metals Res. 14 (2002) 287-291

  981. V. Singh, D.V.A. Rao and A.A. Gokhale: Potential of Scandium Additions in Developing New Aluminium Based Cast Alloys, Indian Foundry Journal 50 (8) (2004) 44-48

  982. V. Singh, K.S. Prasad and A.A. Gokhale: Microstructure and Age Hardening Response of Cast Al-Mg-Sc-Zr Alloys, J. Mater. Sci. 39 (2004) 2861-2864
    Abstract

  983. V. Singh, K.S. Prasad and A.A. Gokhale: Effect of Minor Sc Additions on Structure, Age Hardening and Tensile Properties of Aluminium Alloy AA8090 Plate, Scripta Mater. 50 (2004) 903-908
    Abstract

  984. V.S. Sinyavskii, V.D. Val'kov and E.V. Titkova: The Effect of Scandium and Zirconium Additions on Corrosion Properties of Al-Mg Alloys, Protection of Metals 34 (1998) 549-555
    Abstract

  985. V.S. Sinyavskii and V.D. Kalinin: Marine Corrosion and Protection of Aluminum Alloys According to Their Composition and Structure, Protection of Metals 41 (2001) 317-328
    Abstract

  986. O. Sitdikov, R. Kaibyshev, E. Avtokratova and K. Tsuzaki: Fine-Grained Structure Formation in Al- Mg- Sc Alloy during Hot ECAP, Mater. Sci. Forum 503-504 (2006) 721-726

  987. O. Sitdikov, T. Sakai, E. Avtokratova, R. Kaibyshev, Y. Kimura and K. Tsuzaki: Grain Refinement in a Commercial Al–Mg–Sc Alloy under Hot ECAP Conditions, Mater. Sci. Eng. A 444 (2007) 18-30
    Abstract

  988. O. Sitdikov, T. Sakai, E. Avtokratova, R. Kaibyshev, K. Tsuzaki and Y. Watanabe: Microstructural Evolution in a Commercial Al-Mg-Sc Alloy during ECAP at 300°C, Mater. Sci. Forum 558-559 (2007) 569-574
    Preview of 1st page

  989. O. Sitdikov, T. Sakai, E. Avtokratova, R. Kaibyshev, K. Tsuzaki and Y. Watanabe: Microstructure Behavior of Al–Mg–Sc Alloy Processed by ECAP at Elevated Temperature, Acta Mater. 56 (2008) 821-834
    Abstract

  990. V. Sklenicka, J. Dvorak, M. Svoboda, P. Kral, M. Kvapilova, and Z. Horita: Compressive Creep in an Al-3%Mg-0.2%Sc Alloy Processed by Equal-Channel Angular Pressing, Ultrafine Grained Materials IV, eds. Y.T. Zhu, T.G. Langdon, Z. Horita, M. Zehetbauer, S.L. Semiatin and T.C. Lowe, TMS, 2006, 459-464

  991. V. Sklenicka, J. Dvorak, M. Kvapilova, M. Svoboda, P. Kral, I. Saxl and Z. Horita: Effect of Equal-Channel Angular Pressing (ECAP) on Creep in Aluminium Alloys, Mater. Sci. Forum 539-543 (2007) 2904-2909
    Preview of 1st page

  992. V. Sklenicka, J. Dvorák, P. Král, M. Svoboda and I. Saxl: Some Factors Affecting the Creep Behaviour of Metallic Materials Processed by Equal-Channel Angular Pressing, Int. J. Mat. Res. 100 (2009) 762-766
    Abstract

  993. B. Skrotzki, J. Murken and B. Heinz: Comparison of Laser-Beam Welding and Friction Stir Welding of Age-Hardenable Aluminum Alloys, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 343-350

  994. M. Slámová, V. Ocenásek and G.V. Voort: Polarized Light Microscopy: Utilization in the Investigation of the Recrystallization of Aluminum Alloys, Mater. Charact. 52 (2004) 165-177
    Abstract

  995. A. Slipenyuk, D. Lotsko, Yu. Milman, V. Kuprin, M. Yefimov and M. Danylenko: Influence of Scandium on Amorphization of Aluminum alloys, Proc. NATO Advanced Research Workshop on Metallic Materials with High Structural Efficiency, Kyiv, Ukraine, Sept. 7-13 2003, eds. O.N. Senkov, D.B. Miracle and S.A. Firstov, NATO Science Series II: Mathematics, Physics and Chemistry, Vol. 146, Kluwer Academic Publishers, The Netherlands, 2004 119-124

  996. A.F. Smith: Use of Aluminium-Lithium Alloys in Helicopters, Proceedings of Alumitech '97, May 19-23 1997, Atlanta, Georgia, USA 36-50

  997. B. Smola, I. Stulíková, V. Ocenásek and J. Pelcová: Effect of Sc and Zr Additions on the Microstructure and Age Hardening of an AlMg3MnCr Alloy: Structure and Age Hardening of AlMgMnCrScZr, Mater. Charact. 51 (2003) 11-20
    Abstract

  998. B. Smola, I. Stulíková, V. Ocenásek, J. Pelcová and V. Neubert: Annealing Effects in Al–Sc Alloys, Mater. Sci. Eng. A 462 (2007) 370-374
    Abstract

  999. A. Smolej, B. Skaza and E. Slacek: Superplasticity of the 5083 Aluminium Alloy with the Addition of Scandium, Mater. and Technol. 43 (2009) 299-302
    Abstract, Available Online

  1000. E.M. Sokolovskaya et al.: Reaction of Aluminum with Chromium and Scandium, Met. Sci. & Heat Tr. (11) (1989) 837-839

  1001. E.M. Sokolovskaya, E.F. Kazakova, V.K. Portnoi, E.I. Podd'yakova and N.Yu. Tolmacheva: The Isothermal Cross Section of the Al-Nb-Sc System at 770 K, Moscow Univ. Chem. Bull. 49 (3) (1994) 43-45

  1002. E.M. Sokolovskaya, E.F. Kazakova and E.I. Podd'yakova: Decomposition of Supersaturated Solid Solutions in Liquid-Quenched Al-Sc-Zr and Al-Sc-Cr Alloys, Inorg. Mater. 31 (1995) 1418-1421

  1003. E.M. Sokolovskaya et al.: Investigation of Rapidly Quenched Aluminum Alloys Hardened with Transition Metals, Russ. J. Non-Ferrous Met. 37 (7) (1996) 76-79

  1004. E.M. Sokolovskaya et al.: Time-Temperature Section of the Phase Diagram of the Al-Sc-Zr System at 500°C, Met. Sci. & Heat Tr. (5) (1997) 211-213

  1005. E.M. Sokolovskaya, E.F. Kazakova, V.A. Alikhanov and E.V. Zhuravleva: Interaction between Al3Sc and Al6Mn Intermetallic Compounds at 770 K, Moscow Univ. Chem. Bull. 52 (5) (1997) 70-72

  1006. E.M. Sokolovskaya, E.F. Kazakova and O.D.-S. Kendivan: Polythermal Cross Sections of the Systems Al-V-Me (Me = Zr, Sc) for the Al21V2-MeAl3 Sections, Russ. Metall. (4) (1998) 135-137

  1007. M. Song and D.H. Xiao: Ab Initio Calculation of the Elastic and Optical Properties of Al3Sc Compound, Acta Metall. Sin. (English Lett.) 20 (2007) 425-428
    Abstract, Available Online

  1008. Y. Songbo, H. Boyun and Y. Zhimin: Effect of Minor Sc on High Temperature Mechanical Properties of Ti-Al Based Alloys, Mater. Sci. Eng. A 280 (2000) 204-207
    Abstract

  1009. C.J. Sparks et al.: Bonding Energies and Long-Range Order in the Trialuminides, Mat. Res. Soc. Symp. Proc. 213 (1991) 363-368

  1010. P.K. Spitsyn, O.N. L'vov: Simultaneous Spectrophotometric Determination of Titanium and Scandium in Aluminum Alloys, Ind. Lab. 51 (1985) 295-296

  1011. J.T. Staley et al.: Aluminum Alloys for Aerostructures, Adv. Mater. & Proc. (10) (1997) 17-20
    Abstract

  1012. T.C. Stall, J. Luty, K.R. Fleury and N.W. Spencer: Scandium Containing Aluminum Alloy Firearm, World Patent WO 01/88457 A2, Nov. 22 2001
    Available Online

  1013. T.C. Stall, J. Luty, K.R. Fleury and N.W. Spencer: Scandium Containing Aluminum Alloy Firearm, US Patent 6 557 289 B2, May 6 2003
    Available Online

  1014. T.C. Stall, J. Luty, K.R. Fleury and N.W. Spencer: Scandium Containing Aluminum Alloy Firearm, US Patent 6 711 819 B2, March 30 2004
    Available Online

  1015. M.J. Starink, N. Gao, N. Kamp, S.C. Wang, P.D. Pitcher, and I. Sinclair: Relations between Microstructure, Precipitation, Age-formability and Damage Tolerance of Al–Cu–Mg–Li (Mn, Zr, Sc) Alloys for Age Forming, Mater. Sci. Eng. A 418 (2006) 241-249
    Abstract

  1016. E.A. Starke, Jr., J.T. Staley: Application of Modern Aluminum Alloys to Aircraft, Prog. Aerospace Sci. 32 (1996) 131-172

  1017. H.-R. Stock, B. Köhler, H. Bomas and H.-W. Zoch Characteristics of Aluminium–Scandium Alloy Thin Sheets Obtained by Physical Vapour Deposition, Mater. & Design 31 (2010) S76–S81
    Abstract

  1018. H.E.N. Stone: Workability, Hardness, and Strength of Aluminium Alloys, Mater. Sci. Techn. 11 (1995) 1312-1314

  1019. M.J. Stowell and J.D. Robson: Maximum Precipitate Density: Analytical Approximations, Mater. Sci. Techn. 21 (2005) 749-756
    Abstract

  1020. M. Sugamata, H. Fujii, Junichi Kaneko, M. Kubota: Effect of Sc+Zr Addition on Structures and Mechanical Properties of Rapidly Solidified 7090 Based Alloys, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 513-519

  1021. D.-W. Suh, S.-Y. Lee, K.-H. Lee, S.-K. Lim and K.H. Oh: Microstructural Evolution of Al-Zn-Mg-Cu-(Sc) Alloy during Hot Extrusion and Heat Treatments, J. Mater. Process. Techn. 155-156 (2004) 1330-1336
    Abstract

  1022. D.-W. Suh, S.-Y Lee, J.-Y. Kang and K.H. Oh: Rapid Grain Growth of Hot Extruded Al-Zn-Mg-Cu-(Sc) Alloy during Heat Treatment, Mater. Sci. Forum 449-452 (2004) 605-608
    Preview of 1st page

  1023. A. Sverdlin, A.M. Drits, T.V. Krimova, K.N. Sergeev and I.B. Ginko: Aluminum-Lithium Alloys for Aerospace, Adv. Mater. & Proc. (6) (1998) 49-51
    Abstract

  1024. A. Sverdlin, A. Drits and V. Ovchinnikov: Weldability of Aluminum-Copper-Lithium Alloys, Advances in the Metallurgy of Aluminum Alloys, Proc. James T Staley Honorary Symposium on Aluminum Alloys ed. M. Tiryakioglu, ASM (2001) 255-260

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  1025. W.T. Tack: Aluminum-Scandium Alloys, US Patent 5 597 529, Jan. 28 1997
    Available Online

  1026. W.T. Tack and I.L.H. Hansson: Aluminum Alloys Containing Scandium with Zirconium Additions, US Patent 5 620 652, Apr. 15 1997
    Available Online

  1027. R. Takayama, M. Furukawa, Y. Murashima, T. Sakuragawa, N. Yuda and K. Nomura: High Power SAW Filter with New Al-Sc-Cu/Ti/Al-Sc-Cu/Ti Electrodes, Proc. 1998 IEEE Ultrasonics Symposium (1998) 5-8

  1028. S. Takayama: Effects of Sc or Tb Addition on the Microstructures and Resistivities of Al Thin Films, Mat. Res. Soc. Symp. Proc. 500 (1998) 107-112

  1029. E. Talik, A. Winiarski, B. Kotur and W. Suski: Growth and X-Ray Characterization of ScFe4Al8 Single Crystals. Cryst. Res. & Technol. 36 (2001) 1119-1122
    Available Online

  1030. C. Tan et al.: The Ageing Behavior and Tensile Properties of Al-Sc Alloy, Proceedings of the 3rd International Conference on Aluminium Alloys, June 22-26 1992, Vol.I, NTH, Trondheim, Norway 290-294

  1031. C.Y. Tan et al.: The Ageing Behaviour and Tensile Properties of Al-Li Alloy Containing Sc, Proceedings of the 4th International Conference on Aluminium Alloys, September 11-16 1994, Vol. II, Atlanta, Georgia, USA 329-333

  1032. C.-Y. Tan, Z.-Q. Zheng, C.-Q. Xia and Y. Liang: The Ageing Feature of Al-Li-Cu-Mg-Zr Alloy Containing Sc, J. Cent. South Univ. Technol. 7 (2) (2000) 65-67

  1033. B.-Y. Tang, D.-L. Li, P. Chen, J.-X. Yi, L. Wen, L.-M. Peng and W.-J. Ding: The Thermal Properties of Al–Mg–TM (TM = Sc, Zr): Ab Initio Study, Solid State Sci. 12 (2010) 845–850
    Abstract

  1034. S. Tangen, H. Hallem, H. Bjerkaas, J. Hjelen and E. Nes: Variation in Subgrain Structure over the Cross Section in an Extruded Aluminium Profile - Measured by EBSD, Proc. Scandem 2003, June 10-13 2003, Oslo, Norway 143-144

  1035. B. Tao, S. Li and J. Liu: Effect of Scandium on Corrosion Resistance of Welded Joint of Al-6Mg-Zr Alloy, J. Rare Earths 23 (2005) 216-219
    Abstract

  1036. X. Tao, Y. Ouyang, H. Liu. Y. Feng, Y. Du and Z. Jin: First-Principles Calculations of the Thermodynamic and Elastic Properties of the L12-based Al3RE (RE = Sc, Y, La–Lu), Int. J. Mat. Res. 99 (2008) 582-588
    Abstract

  1037. G.P. Tarcy, P.A. Foster, Jr.: Method for making a Light Metal-Rare Earth Metal Alloy, US Patent 5 037 608, Aug. 6 1991
    Available Online

  1038. G.P. Tarcy, T.M. Gavasto, R.K. Wyss and T.D. Burleigh: Method for Making a Light Metal-Rare Earth Metal Alloy, US Patent 5 238 646, Aug. 24 1993
    Available Online

  1039. G.P. Tarcy and M.L. Slaugenhaupt: Method of Making a Light Metal-Rare Earth Alloy, US Patent 6 045 631, Apr. 4 2000
    Available Online

  1040. J. Tarnacki and Y.-W. Kim: Investigation of As-cast and Rapidly Solified Al3Sc, Scripta Metall. Mater. 23 (1989) 1063-1068

  1041. M.Yu. Teslyuk and V.S. Protasov: The Crystal Structure of Ternary Phases in the Sc-Cu-Al System, Sov. Phys. Crystall. 10 (1966) 470-471

  1042. Y. Tian, B. Sun and Y. Zhai: Preparation of Al-Sc Alloy in Chloride System with Molten Salt Electrolysis, Trans. Nonferrous Met. Soc. China 8 (4) (1998) 626-631
    Abstract

  1043. Y. Tian, B. Sun and Y. Zhai: Measurement on Physiochemical Properties of NaCl-KCl-ScCl3 System for Manufacture of Al-Sc Alloy by Molten Salt Electrolysis, J. Mater. Sci. Technol. (China) 15 (2) (1999) 155-158

  1044. A. Tolley, V. Radmilovic and U. Dahmen: Segregation in Al3(Sc,Zr) Precipitates in Al-Sc-Zr Alloys, Scripta Mater. 52 (2005) 621-625
    Abstract

  1045. D. Tomus, M. Qian, C.A. Brice and B.C. Muddle: Electron Beam Processing of Al–2Sc Alloy for Enhanced Precipitation Hardening, Scripta Mater. 63 (2010) 151–154
    Abstract

  1046. G.Q. Tong, K.C. Chan and T.G. Nieh: Superplastic Bulging of an Al-6Mg-0.3Sc Alloy and its Forming Limits, Mater. Sci. Forum 471-472 (2004) 385-389
    Preview of 1st page

  1047. T. Torma, E. Kovács-Csetényi, I. Vitányi, M. Butova and J. Stepanov: Effect of Scandium in High Purity Aluminium, Proc. 6th International Symposium on High Purity Materials in Science and Technology, May 6-10 1985, Akademie der Wissenschaften der DDR, Dresden, GDR, 388-389

  1048. T. Torma et al.: The Effect of Scandium Addition on the Mechanical Properties of Pure Aluminium and of an AlMg6 Alloy, Mater. Sci. Forum 13/14 (1987) 497-503

  1049. T. Torma et al.: Hardening Mechanisms in Al-Sc Alloys, J. Mater. Sci. 24 (1989) 3924-3927

  1050. L.S. Torodskaya et al.: Polythermal Sections of the Al-Sc-Zr System, Russ. Metall. (5) (1992) 128-131

  1051. L.S. Toropova et al.: Determination of Elastic Strain of the Matrix due to Particles of Phase ScAl3 in an Al-Mg-Sc Alloy, Phys. Met. Metall. 54 (1) (1982) 189-191

  1052. L.S. Toropova et al.: Investigation of Alloys of the Al-Sc-Zr System in the Aluminium-rich Range, Phys. Met. Metall. 70 (6) (1990) 106-110

  1053. L.S. Toropova et al.: Projection of Solidus Surfaces in the Al-rich Region of the Al-Cu-Sc System, Russ. Metall. (3) (1992) 194-199

  1054. G. Trimarchi and A. Zunger: Finding the Lowest-Energy Crystal Structure Starting from Randomly Selected Lattice Vectors and Atomic Positions: First-Principles Evolutionary Study of the Au–Pd, Cd–Pt, Al–Sc, Cu–Pd, Pd–Ti, and Ir–N Binary Systems, J. Phys.: Condens. Matter 20 (2008) 295212
    Abstract

  1055. E.D. Trubnyakova et al.: Phase Equilibria in the Aluminum-Rich Corners of the Ternary Systems Al-Sr-Sc(La, Ce, Pr), Russ. Metall. (3) (1987) 219-222

  1056. N.K. Tsenev et al.: Mechanical Properties of Submicron Grained Al-Li Alloys, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 1125-1132

  1057. N.K. Tsenev, R.Z. Valiev and I.R. Kuzeev: Advanced Properties of Ultra Fine-Grained Al-Alloys, Mater. Sci. Forum 242 (1997) 127-134
    Preview of 1st page

  1058. D. Tsivoulas and J.D. Robson: Coherency Loss of Al3Sc Precipitates during Ageing of Dilute Al-Sc Alloys, Mater. Sci. Forum 519-521 (2006) 473-478
    Preview of 1st page

  1059. K. Turba, P. Málek and M. Cieslar: Superplasticity in a Zr and Sc Modified AA7075 Aluminium Alloy Produced by ECAP, Kovove Mater. 45 (2007) 165-170
    Abstract

  1060. K. Turba, P. Málek and M. Cieslar: Superplasticity in an Al–Mg–Zr–Sc Alloy Produced by Equal-Channel Angular Pressing, Mater. Sci. Eng. A 462 (2007) 91-94
    Abstract

  1061. K. Turba, P. Málek, E.F. Rauch, F. Robaut and M. Cieslar: The Optimization of ECAP Conditions to achieve High Strain-rate Superplasticity in a Zr- and Sc-modified AA 7075 Aluminum Alloy, Int. J. Mat. Res. 100 (2009) 851-857
    Abstract

  1062. N.I. Turkina, V.I. Kuzmina: Phase Reactions in Al-Mg-Sc Alloys (up to 26% Mg and 3% Sc), Russ. Metall. (4) (1976) 179-183

  1063. A.T. Tyvanchuk et al.: Isothermal Section of the Sc-Al-Si System at 770°K, Russ. Metall. (4) (1988) 190-192

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  1064. T. Ueda and K. Takemura: Aluminum Alloy Wiring Layer and Aluminum Alloy Sputtering Target, US Patent 5 541 007, July 30 1996
    Available Online

  1065. A. Ul-Hamid: Characterization of a Thin Film of Al2O3 by SEM/EDS Analysis, Corr. Prevent. & Control 49 (3) (2002) 93-98

  1066. P. Uliasz, T. Knych, A. Mamala and B. Smyrak: Investigation in Properties' Design of Heat Resistant AlZrSc Alloy Wires Assigned for Electrical Application, Proc. 11th International Conference on Aluminium Alloys, Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 248-255
    Abstract

  1067. R. Ünal and K.U. Kainer: Production of High Strength Al-Mg-Sc Alloys by PM, Proc. 1997 European Conference on Advances in Structural PM Component Production (EURO PM 97), Oct. 15-17 1997, Munich, Germany 482-487

  1068. R. Ünal and K.U. Kainer: Production of High Strength Al-Mg-Sc Alloys by PM, Powd. Met. 41 (2) (1998) 119-122

  1069. R. Ünal and K.U. Kainer: PM Production of High Strength Aluminium-Magnesium-Scandium Alloys, Met. Powd. Report 54 (2) (1999) 35 (Abstract only)
    Abstract

  1070. T. Ungár: Microstructural Parameters from X-ray Diffraction Peak Broadening, Scripta Mater. 51 (2004) 777-781
    Abstract

  1071. T. Ungár: Characterization of Ultra-Fine-Grain Materials by X-Ray Diffraction Peak Profile Analysis, Ultrafine Grained Materials III, eds. Y.T. Zhu, T.G. Langdon, R.Z. Valiev, S.L. Semiatin, D.H. Shin and T.C. Lowe, TMS, 2004 37-44

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  1072. Yu.M. Vainblat, N.A. Sharshagin, L.B. Khokhlatova, N.I. Kolobnev, N.V. Bukharina and L.G. Klimovich: Development of Recrystallized Structure During Hot Deformation of Al-Mg-Li-Zr-Sc Alloy, Proc. 9th International Conference on Aluminium Alloys, Aug. 2-5 2004, Brisbane, Australia, eds. J.F. Nie, A.J. Morton and B.C. Muddle, Institute of Materials Engineering Australasia Ltd, 383-389

  1073. A.V. Vakhobov and Yu.V. Shchevelev: High-Temperature Strength of High-Purity Aluminum Alloyed with Various Elements, Met. Sci. & Heat Tr. 45 (5) (2003) 174-176
    Abstract

  1074. R.Z. Valiev, A.V. Korznikov and R.R. Mulyukov: Structure and Properties of Ultrafine-Grained Materials Produced by Severe Plastic Deformation, Mater. Sci. Eng. A 168 (1993) 141-148

  1075. R.Z. Valiev, R.K. Islamgaliev and N.F. Yunusova: Microstructural Aspects in Superplasticity of Ultrafine-Grained SPD Alloys, Mater. Sci. Forum 447-448 (2004) 411-416
    Preview of 1st page

  1076. R.Z. Valiev and T.G. Langdon: Principles of Equal-Channel Angular Pressing as a Processing Tool for Grain Refinement, Prog. Mater. Sci. 51 (2006) 881-981
    Abstract

  1077. R. Valiev, R. Islamgaliev, I. Semenova and Nina Yunusova: New Trends in Superplasticity in SPD-processed Nanostructured Materials, Intern. J. Mater. Res. 98 (2007) 314-319
    Abstract

  1078. V.V. Valuev: Microstructure of Large Ingots of Aluminum Alloy 01570, Met. Sci. & Heat Tr. 40 (6) (1998) 234-237

  1079. V. Varyukhin, Y. Beygelzimer, S. Synkov and D. Orlov: Application of Twist Extrusion, Mater. Sci. Forum 503-504 (2006) 335-340
    Preview of 1st page

  1080. M. Vedani, G. Angella, P. Bassani, D. Ripamonti and A. Tuissi: DSC Analysis of Strengthening Precipitates in Ultrafine Al–Mg–Si Alloys, J. Therm. Anal. Cal. 87 (2007) 277-284
    Abstract, Available Online

  1081. R.D. Vengrenovich, B.V. Ivanskii and A.V. Moskalyuk: Generalized Lifshits–Slezov–Wagner Distribution, J. Exp. Theor. Phys. 104 (2007) 906-912
    Abstract

  1082. K. Venkateswarlu, L.C. Pathak, A.K. Ray, G. Das, P.K. Verma, M. Kumar and R.N. Ghosh: Microstructure, Tensile Strength and Wear Behaviour of Al-Sc Alloy, Mater. Sci. Eng. A 383 (2004) 374-380
    Abstract

  1083. K. Venkateswarlu, V. Rajinikanth, A.K. Ray, C. Xu and T.G. Langdon: The Characteristics of Aluminum–Scandium Alloys Processed by ECAP, Mater. Sci. Eng. A 527 (2010) 1448–1452
    Abstract

  1084. P.K. Verma, M. Kumar, L.C. Pathak and K. Venkateswarlu: Effect of Al3Sc Dispersoids on Grain Refinement and Mechanical Properties of Al and its Alloys (abstract), Trans. Indian Institute of Metals 56 (5) (2003) A21

  1085. V.A. Vertogradskii and I.N. Belskaya: Dependence of the Thermal Conductivity of Alloys of the Al-Mg System on the Composition and Temperature, Met. Sci. & Heat Tr. 40 (6) (1998) 231-233

  1086. S.L. Verzasconi, J.W. Morris, Jr.: Cryogenic Mechanical Properties of Low Density Superplastic Al-Mg-Sc Alloys, Advances in Cryogenic Engineering (Materials) 36 (1990) 1127-1133

  1087. J.S. Vetrano, S.M. Bruemmer, L.M. Pawlowski and I.M. Robertson: Influence of the Particle Size on Recrystallization and Grain Growth in Al-Mg-X Alloys, Mater. Sci. Eng. A 238 (1997) 101-107
    Abstract

  1088. J.S. Vetrano, C.H. Henager, Jr., M.T. Smith and S.M. Bruemmer: Microstructural Development for Superplasticity in Al-Mg-Mn Alloys, Hot Deformation of Aluminum Alloys II, eds. T.R. Bieler, L.A. Lalli and S.R. MacEwen, TMS, USA 1998 407-418

  1089. J.S. Vetrano, C.H. Henager, Jr., S.M. Bruemmer, Y. Ge and C.H. Hamilton: Use of Sc, Zr and Mn for Grain Size Control in Al-Mg Alloys, Superplasticity and Superplastic Forming 1998, eds. A.K. Gosh and T.R. Bieler, TMS, USA 1998 89-97

  1090. A. Vinogradov, A. Washikita, K. Kitagawa and V.I. Kopylov: Fatigue Life of Fine-Grain Al-Mg-Sc Alloys Produced by Equal-Channel Angular Pressing, Mater. Sci. Eng. A 349 (2003) 318-326
    Abstract

  1091. M. Vlach, B. Smola, I. Stulíková and V. Ocenásek: Microstructure and Mechanical Properties of the AA6082 Aluminium Alloy with Small Additions of Sc and Zr, Int. J. Mat. Res. 100 (2009) 420-423
    Abstract

  1092. M. Vlach, I. Stulíková, B. Smola, N. Zaludová and J. Cerná: Phase Transformations in Isochronally Annealed Mould-Cast and Cold-Rolled Al–Sc–Zr-based Alloy, J. Alloys & Compounds 492 (2010) 143–148
    Abstract

  1093. D. Vojtech: Challenges for Research and Development of New Aluminum Alloys, Metalurgija 49 (2010) 181-185
    Abstract, Available Online

  1094. P.W. Voorhees: Scandium Overtakes Zirconium, Nature Mater. 5 (2006) 435-436

  1095. N.V. Vyazovikina: The Effect of Scandium on the Corrosion Resistance of Aluminum and its Alloys in 3% NaCl Solution, Protection of Metals 35 (1999) 448-453
    Abstract

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  1096. D.J. Waldron and W.F. Bozich: Process for Preparing Aluminum/Lithium/Scandium Rolled Sheet Products, US Patent 5 882 449, March 16 1999
    Available Online

  1097. D.J. Waldron and W.F. Bozich: Heat Treated Al-Cu-Li-Sc Alloys, US Patent 6 074 498, June 13 2000
    Available Online

  1098. J.-S. Wang: The Ductile versus Brittle Response of L12 Intermetallic Bicrystals, Mater. Sci. Eng. A 239-240 (1997) 399-403
    Abstract

  1099. J.-S. Wang: Dislocation Nucleation and the Intrinsic Fracture Behavior of L12 Intermetallic Alloys, Acta Mater. 46 (1998) 2663-2674
    Abstract

  1100. M. Wang, Z. Liu, Z. Liu, S. Yang, Y. Weng and T. Song: Effects of Sc on Microstructure and Low-Cycle Fatigue Properties of Al–Li Alloy, Mater. Sci. Eng. A 483-484 (2008) 448-451
    Abstract

  1101. X. Wang, G. Chen, B. Li, L. Wu and D. Jiang: Effects of Sc, Zr and Ti on the Microstructure and Properties of Al Alloys with High Mg Content, Rare Metals 29 (2010) 66-71
    Abstract

  1102. Z.F. Wang, P. Wang, C.L. Briant and K.S. Kumar: The Effect of Microstructure on the Polarization and Stress Corrosion Cracking in Al-5Mg Alloys Proc. Corrosion2000, Orlando, Florida, USA 00373/1-12

  1103. Z. Wang, P. Wang, K.S. Kumar and C.L. Briant: Stress Corrosion Cracking of Aluminum-Magnesium Alloys Containing Scandium and Silver Additions, Proc. Chemistry and Electrochemistry of Corrosion and Stress Corrosion Cracking, ed. R.H. Jones, TMS, 2001 573-582

  1104. T. Warner: Recently-Developed Aluminium Solutions for Aerospace Applications, Mater. Sci. Forum 519-521 (2006) 1271-1278
    Preview of 1st page

  1105. A. Washikita, K. Kitagawa, V.I. Kopylov and A. Vinogradov: Tensile and Fatigue Properties of Al-Mg-Sc-Zr Alloy Fine-Grained by Equal-Channel Angular Pressing, Ultrafine Grained Materials II, eds. Y.T. Zhu, T.G. Langdon, R.S. Mishra, S.L. Semiatin, M.J. Saran and T.C. Lowe, TMS, 2002 341-350
    Abstract

  1106. C. Watanabe, C.Y. Jin, R. Monzen and K. Kitagawa: Low-Cycle Fatigue Behavior and Dislocation Structure of an Al-Mg-Sc Alloy, Mater. Sci. Eng. A 387-389 (2004) 552-555
    Abstract

  1107. C. Watanabe, T. Kondo and R. Monzen: Coarsening of Al3Sc Precipitates in an Al-0.28 Wt Pct Sc Alloy, Metall. Mater. Trans. A 35A (2004) 3003-3008
    Preview of 1st page

  1108. C. Watanabe, D. Watanabe and R. Monzen: Coarsening Behavior of Al3Sc Precipitates in an Al–Mg–Sc Alloy, Mater. Trans. 47 (2006) 2285-2291
    Abstract

  1109. C. Watanabe, R. Monzen and K. Tazaki: Effects of Al3Sc Particle Size and Precipitate-Free Zones on Fatigue Behavior and Dislocation Structure of an Aged Al–Mg–Sc Alloy, Intern. J. Fatigue 30 (2008) 635-641
    Abstract

  1110. D. Watanabe, C. Watanabe and R. Monzen: Coarsening Kinetics of Al3Sc Precipitates in an Al–Mg–Sc Alloy Aged at 573 K, Mater. Trans. 48 (2007) 1571-1574
    Abstract

  1111. T.J. Watson: High Strength Aluminum Alloy, US Patent 6 248 453, June 19 2001
    Available Online

  1112. T.J. Watson: High Strength Aluminium Alloy, European Patent EP 1 111 078 A2, June 27 2001

  1113. T.J. Watson: Aluminum Base Alloys, US Patent 6 974 510, December 13 2005
    Available Online

  1114. Q. Wen, F. Ye, M. Huang, J. Wang and J. Lin: Precipitation and Coarsening Kinetics and Effect of Mechanical Property of Al3Sc in Al-Sc Alloy, Aluminum Alloys: Fabrication, Characterization and Applications II, eds. W. Yin, S.K. Das and Z. Long, TMS, 2009 141-146

  1115. L.A. Willey: Aluminum Scandium Alloy, US Patent 3 619 181, Nov. 9 1971
    Available Online

  1116. J.C. Williams and E.A. Starke, Jr.: Progress in Structural Materials for Aerospace Systems, Acta Mater. 51 (2003) 5775-5799
    Abstract

  1117. R. Winkler and J. Wüst: Strukturbauteil aus einer Aluminium-Druckgusslegierung, European Patent EP 0918095 A1, May 26 1999
    Available Online

  1118. T. Wirtz, G. Lütjering, A. Gysler, B. Lenczowski and R. Rauh: Fatigue Properties of the Aluminium Alloys 6013 and Al-Mg-Sc, Mater. Sci. Forum 331-337 (2000) 1489-1494
    Preview of 1st page

  1119. J.J. Witters et al.: Evaluation of Al-Li Alloys 1420 and 1421, Proceedings of the Sixth International Aluminium-Lithium Conference, October 7-11 1991, Garmisch-Partenkirchen, Germany, 351-356

  1120. J. Wloka and S. Virtanen: Influence of scandium on the pitting behaviour of Al–Zn–Mg–Cu alloys, Acta Mater. 55 (2007) 6666-6672
    Abstract

  1121. R. Wolter et al.: The Description of the Isothermal Decomposition Processes in Al-Sc Alloys by means of Electric Resistivity Measurements and TEM Investigations, Crystal Res. & Technol. 28 (1993) 63-72

  1122. C. Wolverton: Crystal Structure and Stability of Complex Precipitate Phases in Al-Cu-Mg-(Si) and Al-Zn-Mg Alloys, Acta Mater. 49 (2001) 3129-3142
    Abstract

  1123. C. Wolverton: Solute–Vacancy Binding in Aluminum, Acta Mater. 55 (2007) 5867-5872
    Abstract

  1124. K.-D. Woo, H.-J. Mun and S.W. Kim: The Effect of Sc on the Precipitation Behavior in Al-Zn-Mg-Cu Alloys, Proc. Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM 4), 2547-2550

  1125. K.-D. Woo, S.-W. Kim and T.P. Lou: Mechanical Properties and Deformation Behavior of Al-4Mg-0.4Sc-1.5Mm Alloy at Room Temperature, Mater. Sci. Eng. A 334 (2002) 257-261
    Abstract

  1126. K.-D. Woo, S.-W. Kim, C.-H. Yang, T.P. Lou and Y. Miura: Effects of Grain Size on High Temperature Deformation Behavior of Al-4Mg-0.4Sc Alloy, Mater. Lett. 57 (2003) 1903-1909
    Abstract

  1127. K.-D. Woo and S.-W. Kim: Tensile Behavior of Al-4%Mg-0.4%Sc-0.5%Misch Metal Alloy at Room Temperature, Met. Mater. Intern. 11 (2005) 95-99

  1128. C. Woodward, M. Asta, G. Kresse and J. Hafner: Density of Constitutional and Thermal Point Defects in L12 Al3Sc, Phys. Rev. B 63 (2001) 094103-1-6
    Abstract

  1129. L.-M. Wu, W.-H. Wang, Y.-F. Hsu and S. Trong: Effects of Microstructure on the Mechanical Properties and Stress Corrosion Cracking of an Al-Zn-Mg-Sc-Zr Alloy by Various Temper Treatments, Mater. Trans. 48 (2007) 600-609
    Abstract

  1130. L.-M. Wu, W.-H. Wang, Y.-F. Hsu and S. Trong: Effects of Homogenization Treatment on Recrystallization Behavior and Dispersoid Distribution in an Al–Zn–Mg–Sc–Zr Alloy, J. Alloys & Compounds 456 (2008) 163-169
    Abstract

  1131. L.-M. Wu, M. Seyring, M. Rettenmayr and W.-H. Wang: Characterization of Precipitate Evolution in an Artificially Aged Al–Zn–Mg–Sc–Zr Alloy, Mater. Sci. Eng. A 527 (2010) 1068–1073
    Abstract

  1132. Y.L. Wu, F.H. Froes, C.G. Li and J. Liu: Effects of Microalloying with Sc, Ni and Ce on the Behavior of Ingot Aluminum Alloy C912 (Al-Zn-Mg-Cu), Synthesis/Processing of Lightweigth Metallic Materials II, Feb. 9-13 1997 Orlando, FL, USA 73-81

  1133. Y.-L. Wu, F.H. Froes, C. Li and A. Alvarez: Microalloying of Sc, Ni and Ce in an Advanced Al-Zn-Mg-Cu Alloy, Metall. Mater. Trans. A 30A (1999) 1017-1024
    Abstract

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  1134. C. Xia, F. Zeng and Y. Gu: Phase Relations of Al-4Mg-Sc-Zr Quaternary System in Al-rich Range at 430°C, Trans. Nonferrous Met. Soc. China 13 (2003) 546-552
    Abstract

  1135. C. Xia, F. Zeng and Y. Gu: Al-rich Part Phase Relation in Al-Mg-Sc System at 430°C, Trans. Nonferrous Met. Soc. China 13 (2003) 1124-1127
    Abstract

  1136. D.H. Xiao, M. Song, B.Y. Huang, J.H. Yi, Y.H. He and Y.M. Li: Effect of Sc Addition on Microstructure and Mechanical Properties of Al-Cu-Mg-Ag-Zr Alloy, Mater. Sci. Techn. 25 (2009) 747-752
    Abstract

  1137. Y. Xiao, C. Gao, H. Ma and S. Tian: Effect of Scandium on Superplasticity of Al-Mg Alloys, Trans. Nonferrous Met. Soc. China 11 (2001) (2) 235-238
    Abstract

  1138. C. Xu, M. Furukawa, Z. Horita and T.G. Langdon: Severe Plastic Deformation as a Processing Tool for Developing Superplastic Metals, J. Alloys & Compounds 378 (2004) 27-34
    Abstract

  1139. C. Xu, M. Furukawa, Z. Horita and T.G. Langdon: Producing Superplastic Ultrafine-Grained Aluminum Alloys through Severe Plastic Deformation, Mater. Sci. Forum 447-448 (2004) 403-409
    Preview of 1st page

  1140. C. Xu, M. Furukawa, Z. Horita and T.G. Langdon: Achieving a Superplastic Forming Capability through Severe Plastic Deformation, Nanomaterials by Severe Plastic Deformation (Proc. NANOSPD2, Dec. 9-13 2002, Vienna, Austria), eds. M. Zehetbauer and R.Z. Valiev, Wiley VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, 2004, 701-710

  1141. C. Xu, M. Furukawa, Z. Horita and T.G. Langdon: Developing High Strain Rate Superplasticity in Aluminum Alloys, Mater. Sci. Forum 475-479 (2005) 2949-2954
    Preview of 1st page

  1142. C. Xu, M. Kawasaki, M. Furukawa, Z. Horita and T.G. Langdon: Mechanical Properties of a Spray-Cast Aluminum Alloy Processed by Severe Plastic Deformation, Mater. Sci. Forum 539-543 (2007) 141-148
    Preview of 1st page

  1143. C. Xu, Z. Horita and T.G. Langdon: The Processing of Ultrafine-Grained Materials Using High-Pressure Torsion, Mater. Sci. Forum 558-559 (2007) 1283-1294
    Preview of 1st page

  1144. G. Xu, Z. Nie, T. Jin, L. Rong, H. Ruan and Z. Yin: Microstructure and Properties of Al-4Cu Alloy containing Sc, Trans. Nonferrous Met. Soc. of China 14 (2004) 63-66
    Abstract

  1145. G. Xu, B. Tao, J. Liu and S. Li: Corrosion Behavior of an Al-6Mg-Sc-Zr Alloy, Rare Metals, 24 (2005) 246-251

  1146. J.-H. Xu and A.J. Freeman: Phase Stability and Electronic Structure of ScAl3 and ZrAl3 and of Sc-stabilized Cubic ZrAl3 Precipitates, Phys. Rev. B 41 (1990) 12553-12561
    Abstract

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  1147. B.F. Yakushin, S.Yu. Nastich: A Rapid Method of Evaluating the Weldability of Aluminium Alloys, Weld. Inter. 9 (1995) 915-916

  1148. D. Yamaguchi, Z. Horita, T. Fujinami, M. Nemoto and T.G. Langdon: Factors Affecting Grain Refinement in Equal-Channel Angular Pressing, Mater. Sci. Forum 331-337 (2000) 607-612
    Preview of 1st page

  1149. A. Yamashita, D. Yamaguchi, Z. Horita and T.G. Langdon: Influence of Pressing Temperature on Microstructural Development in Equal-Channel Angular Pressing, Mater. Sci. Eng. A 287 (2000) 100-106
    Abstract

  1150. S. Yang, B. Gao, Z. Wang, Z. Shi, Y. Ban, H. Kan, X. Cao and Z. Qiu: Preparation of Al-Sc Alloys by Molten Salt Electrolysis, Innovations in Electrometallurgy, eds. A. Powell and M. Free, TMS, 2007 1-4

  1151. S.P. Yatsenko and N.A. Sabirzyanov: Synthesis of Compounds of Impurities with Chemically Active Additives in Liquid Aluminum and Gallium, J. Phys.: Conf. Series 98 (2008) 032008
    Abstract, Available Online

  1152. S.P. Yatsenko, N.A. Sabirzyanov and A.S. Yatsenko: Dissolution Rates and Solubility of some Metals in Liquid Gallium and Aluminum, J. Phys.: Conf. Series 98 (2008) 062032
    Abstract, Available Online

  1153. M.R. Yavorskaya et al.: Increasing the Density and Strength of Weld Metal in the Zone of Backing Runs of Important Components of AMg6NPP Alloy, Paton Weld. J. 5 (1993) 172-175

  1154. Y. Ye, P. Li, L.S. Novikov, V.S. Avilkina and L. He: Comparison of Residual Microstructures Associated with Impact Craters in Al–Sc and Al–Ti Alloys, Acta Mater. 58 (2010) 2520-2526
    Abstract

  1155. Y. Ye, P. Li and L. He: Valence Electron Structure Analysis of Morphologies of Al3Ti and Al3Sc in Aluminum Alloys, Intermetallics 18 (2010) 292–297
    Abstract

  1156. Y. Ye, L. He and P. Li: Differences of Grain-refining Effect of Sc and Ti Additions in Aluminum by Empirical Electron Theory Analysis, Trans. Nonferrous Met. Soc. China 20 (2010) 465-470
    Abstract, Available Online

  1157. Z. Yin, Q. Pan, Y. Zhang and F. Jiang: Effect of Minor Sc and Zr on the Microstructure and Mechanical Properties of Al-Mg Based Alloys, Mater. Sci. Eng. A 280 (2000) 151-155
    Abstract

  1158. Z. Yin, L. Yang, Q. Pan and F. Jiang: Effect of Minor Sc and Zr on Microstructures and Mechanical Properties of Al-Zn-Mg based Alloys, Trans. Nonferrous Met. Soc. China 11 (2001) (6) 822-825
    Abstract

  1159. Z. Yin, F. Jiang, Q. Pan, F. Guo, D. Zhu, L. Song, Y. Zen and T. Wang: Microstructures and Mechanical Properties of Al-Mg and Al-Zn-Mg based Alloys containing Minor Scandium and Zirconium, Trans. Nonferrous Met. Soc. China 13 (2003) 515-520
    Abstract

  1160. Z. Yin, F. Guo, Q. Pan and L. Song: Al-Cu based Welding Wire with Minor Sc-Zr Alloying and its Application, Trans. Nonferrous Met. Soc. China 13 (2003) 781-784
    Abstract

  1161. M.H. Yoo, C.L. Fu: Cleavage Fracture of Ordered Intermetallic Alloys, Mater. Sci. Eng. A153 (1992) 470-478

  1162. M.H. Yoo and K. Yoshimi: An Empirical Model for Ideal Work of Adhesion: Transition-Metal Aluminides and Silicides, Intermetallics 8 (2000) 1215-1224
    Abstract

  1163. K. Yu, S. Li, W. Li and Y. Xiao: Effect of Trace Sc and Zr on Ageing Behavior and Tensile Properties of 2618 Alloy, Trans. Nonferrous Met. Soc. China 9 (3) (1999) 593-598
    Abstract

  1164. K. Yu, S. Li and W. Li: Effect of Trace Sc and Zr on the Mechanical Properties and Microstructure of Al Alloy 2618, J. Mater. Sci. Technol. 16 (2000) 416-420

  1165. K. Yu, S. Li and W. Li: Recrystallization Behavior in an Al-Cu-Mg-Fe-Ni Alloy with Trace Scandium and Zirconium, Mater. Trans., JIM 41 (2000) 358-361
    Abstract

  1166. K. Yu, W. Li, S. Li and J. Zhao: Mechanical Properties and Microstructure of Aluminum Alloy 2618 with Al3(Sc, Zr) Phases, Mater. Sci. Eng. A 368 (2004) 88-93
    Abstract

  1167. N.F. Yunusova, R.K. Islamgaliev and R.Z. Valiev: High-Strain-Rate Superplasticity in Aluminum 1420 and 1421 Alloys Subjected to Equal-Channel Angular Pressing, Russ. Metall. (2) (2004) 123-128
    Abstract

  1168. K.A. Yushchenko et al.: Effect of Scandium on Weldability and Properties of Welded Joints in Aluminium-Magnesium-Lithium System Alloys, Welding in the World 35 (1995) 48-51

    A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z
  1169. V.V. Zakharov, T.D. Rostova: On the Possibility of Scandium Alloying of Copper-Containing Aluminum Alloys, Met. Sci. & Heat Tr. (2) (1995) 65-69

  1170. V.V. Zakharov and T.D. Rostova: High-Resource High-Strength Aluminum Alloys, Met. Sci. & Heat Tr. (5) (1995) 203-207

  1171. V.V. Zakharov: Industrial Aluminum Alloys with Scandium Additive, Met. Sci. & Heat Tr. (7) (1995) 283-285

  1172. V.V. Zakharov and T.D. Rostova: Shear Bands in Aluminum Alloys Containing Scandium and Lithium, Met. Sci. & Heat Tr. (4) (1996) 163-167

  1173. V.V. Zakharov: Stability of the Solid Solution of Scandium in Aluminum, Met. Sci. & Heat Tr. (2) (1997) 61-66

  1174. V.V. Zakharov and T.D. Rostova: Mechanical Anisotropy in Scandium-Bearing Aluminum Alloy Sheets, Alum. Trans. 2 (2000) 329-335
    Abstract

  1175. V.V. Zakharov and T.D. Rostova: Influence of Dispersion Particles of Al3Li and Al3Sc Crosscut by Dislocations on Properties of Aluminum Alloys, Russ. J. Non-Ferrous Met. 42 (7) (2001) 19-27

  1176. V.V. Zakharov: Some Problems of the Use of Aluminum-Lithium Alloys, Met. Sci. & Heat Tr. 45 (2) (2003) 49-54
    Abstract

  1177. V.V. Zakharov: Effect of Scandium on the Structure and Properties of Aluminum Alloys, Met. Sci. & Heat Tr. 45 (7) (2003) 246-253
    Abstract

  1178. V.V. Zakharov and T.D. Rostova: High-Strength Weldable Alloy 1970 Based on the Al - Zn - Mg System, Met. Sci. & Heat Tr. 47 (4) (2005) 131-138
    Abstract

  1179. V.V. Zakharov, T.D. Rostova and I.A. Fisenko: High-Strength Weldable Corrosion-Resistant Aluminum Alloy for Bearing Building Structures, Met. Sci. & Heat Tr. 47 (8) (2005) 377-382
    Abstract

  1180. V. V. Zakharov and T. D. Rostova: Effect of Scandium, Transition Metals, and Admixtures on Strengthening of Aluminum Alloys due to Decomposition of the Solid Solution, Met. Sci. & Heat Tr. 49 (9) (2007) 435-442
    Abstract

  1181. I.I. Zalutskii and P.I. Kripyakevich: RAl3 Compounds in Rare Earth-Aluminum Systems and their Crystal Structures, Sov. Phys. Crystall. 12 (1967) 341-343

  1182. V.M. Zamyatin et al.: Surface Tension and Density Polytherms for Molten Aluminium Alloyed with Titanium, Scandium and Iron, Sov. Non-Ferrous Met. Res. 14 (1986) 140-143

  1183. F. Zeng, C. Xia and Y. Gu: The 430 °C Isothermal Section of the Al-4Mg-Sc-Zr Quaternary System in the Al-rich Range, J. Alloys & Compounds 363 (2004) 175-181
    Abstract

  1184. X. Zhai, M. Zhang, J. Li and Y. Fu: Preparation of Al-Sc Alloys by Molten Salts Electrolysis, Aluminum Alloys: Fabrication, Characterization and Applications II, eds. W. Yin and S.K. Das, TMS, 2008 99-104

  1185. H. Zhang, H. Uochi, S. Yamazaki, Y. Takemura, M. Miyazaki, A. Murakami, T. Konuma, A. Sugawara and Y. Uehara: Process for Fabricating Electronic Circuits with Anodically Oxidized Scandium Doped Aluminum Wiring, US Patent 5 830 786, Nov. 3 1998
    Available Online

  1186. J. Zhang, Z. Yin, Y. Zhang, Y. Gao and Q. Pan: Microstructure of Differently Treated Al-Mg-Sc-Zr Alloys, J. Cent. South Univ. Technol. 4 (1) (1997) 24-27
    Online Article

  1187. X. Zhang, J. Liu, J. Tang, L. Li, M. Chen, S. Liu and B. Zhu: Element Segregation on the Surfaces of Pure Aluminum Foils, Appl. Surf. Sci. 256 (2010) 7300–7304
    Abstract

  1188. Y. Zhang, Z. Yin, J. Zhang, Q. Pan and Z. Peng: Recrystallization of Al-Mg-Sc-Zr Alloys, Rare Metal Materials and Engineering 31 (3) (2002) 167-170

  1189. J. Zhao, F. Jiang, H. Jian, K. Wen, L. Jiang and X. Chen: Comparative Investigation of Tungsten Inert Gas and Friction Stir Welding Characteristics of Al–Mg–Sc Alloy Plates, Mater. & Design 31 (2010) 306-311
    Abstract

  1190. W.T. Zhao, D.S. Yan, X.Y. Li, L.J. Rong and Y.Y. Li: Tensile Property of Al-Mg-Sc-Zr Alloy at Cryogenic Temperature, AIP Conf. Proc. 824A (2006) 169-175
    Abstract

  1191. W.T. Zhao, D.S. Yan and L.J. Rong: Influence of the Nickel on the Corrosion Behavior of Al-Mg-Sc-Zr Alloy, Mater. Sci. Forum 546-549 (2007) 1123-1128
    Preview of 1st page

  1192. F. Zhou, S.R. Nutt, C.C. Bampton and E.J. Lavernia: Nanostructure in an Al-Mg-Sc Alloy Processed by Low-Energy Ball Milling at Cryogenic Temperature, Metall. Mater. Trans. A 34A (2003) 1985-1992
    Preview of 1st page

  1193. F. Zhou, Z. Lee, E.J. Lavernia and S.R. Nutt: The Influence of Sc on Thermal Stability of a Nanocrystalline Al-Mg Alloy Processed by Cryogenic Ball Milling, Metall. Mater. Trans. A 36A (2005) 1587-1594
    Preview of 1st page

  1194. L. Zhuo, S. Pang, H. Wang and T. Zhang: Effect of Cooling Rate on Microstructure and Mechanical Properties of Rapidly Solidified Al-based Bulk Alloys, J. Alloys & Compounds 504S (2010) S117–S122
    Abstract

  1195. L. Zou, Q.-L. Pan, Y.-B. He, C.-Z. Wang and W.-J. Liang: Effect of Minor Sc and Zr Addition on Microstructures and Mechanical Properties of Al-Zn-Mg-Cu Alloys, Trans. Nonferrous Met. Soc. China 17 (2007) 340-345
    Abstract

  1196. E. Zschech: Metallkundliche Prozesse bei der Wärmebehandlung Aushärtbarer Aluminiumlegierungen, Härterei-Technische Mitteilungen 51 (3) (1996) 137-144

  1197. A. Zúñiga, L. Ajdelsztajn and E.J. Lavernia: Spark Plasma Sintering of a Nanocrystalline Al-Cu-Mg-Fe-Ni-Sc Alloy, Metall. Mater. Trans. A 37A (2006) 1343-1352
    Preview of 1st page

A  B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z