Aug. 29 2010
- H. Bo, L.B. Liu and Z.P. Jin:
Thermodynamic Analysis of Al–Sc, Cu–Sc and Al–Cu–Sc System,
J. Alloys & Compounds 490 (2010) 318–325
Abstract
- D. Emadi, A.K.P. Rao and M. Mahfoud:
Influence of Scandium on the Microstructure and Mechanical Properties of A319 Alloy,
Mater. Sci. Eng. A 527 (2010) 6123–6132
Abstract
- K. Fan, F. Liu, S.J. Song, G.C. Yang and Y.H. Zhou:
Deduction of Activation Energy for Diffusion by Analyzing Soft Impingement in Isothermal Solid-State Precipitation,
J. Alloys & Compounds 491 (2010) L11–L14
Abstract
- A. Kumar, A.K. Mukhopadhyay and K.S. Prasad:
Superplastic Behaviour of Al–Zn–Mg–Cu–Zr Alloy AA7010 containing Sc,
Mater. Sci. Eng. A 527 (2010) 854–857
Abstract
- W.-S. Lee, T.-H. Chen, C.-F. Lin and M.-S. Chen:
Impact Deformation Behaviour and Dislocation Substructure of Al–Sc Alloy,
J. Alloys & Compounds 493 (2010) 580–589
Abstract
- Z.Y. Ma, F.C. Liu and R.S. Mishra:
Superplastic Deformation Mechanism of an Ultrafine-Grained Aluminum Alloy Produced by Friction Stir Processing,
Acta Mater. 58 (2010) 4693-4704
Abstract
- T. Marlaud, A. Deschamps, F. Bley, W. Lefebvre and B. Baroux:
Evolution of Precipitate Microstructures During the Retrogression and Re-ageing Heat Treatment of an Al–Zn–Mg–Cu Alloy,
Acta Mater. 58 (2010) 4814-4826
Abstract
- E.A. Marquis and J.M. Hyde:
Applications of Atom-Probe Tomography to the Characterisation of Solute Behaviours,
Mater. Sci. Eng. R 69 (2010) 37–62
Abstract
- M.M. Sharma, M.F. Amateau and T.J. Eden:
Corrigendum to “Hardening Mechanisms of Spray Formed Al–Zn–Mg–Cu Alloys with Scandium and Other Elemental Additions” [J. Alloys Compd. 416 (2006) 135–142],
J. Alloys & Compounds 493 (2010) 707
Abstract
- H.-R. Stock, B. Köhler, H. Bomas and H.-W. Zoch
Characteristics of Aluminium–Scandium Alloy Thin Sheets Obtained by Physical Vapour Deposition,
Mater. & Design 31 (2010) S76–S81
Abstract
- B.-Y. Tang, D.-L. Li, P. Chen, J.-X. Yi, L. Wen, L.-M. Peng and W.-J. Ding:
The Thermal Properties of Al–Mg–TM (TM = Sc, Zr): Ab Initio Study,
Solid State Sci. 12 (2010) 845–850
Abstract
- D. Tomus, M. Qian, C.A. Brice and B.C. Muddle:
Electron Beam Processing of Al–2Sc Alloy for Enhanced Precipitation Hardening,
Scripta Mater. 63 (2010) 151–154
Abstract
- K. Venkateswarlu, V. Rajinikanth, A.K. Ray, C. Xu and T.G. Langdon:
The Characteristics of Aluminum–Scandium Alloys Processed by ECAP,
Mater. Sci. Eng. A 527 (2010) 1448–1452
Abstract
- M. Vlach, I. Stulíková, B. Smola, N. Zaludová and J. Cerná:
Phase Transformations in Isochronally Annealed Mould-Cast and Cold-Rolled Al–Sc–Zr-based Alloy,
J. Alloys & Compounds 492 (2010) 143–148
Abstract
- L.-M. Wu, M. Seyring, M. Rettenmayr and W.-H. Wang:
Characterization of Precipitate Evolution in an Artificially Aged Al–Zn–Mg–Sc–Zr Alloy,
Mater. Sci. Eng. A 527 (2010) 1068–1073
Abstract
- Y. Ye, P. Li, L.S. Novikov, V.S. Avilkina and L. He:
Comparison of Residual Microstructures Associated with Impact Craters in Al–Sc and Al–Ti Alloys,
Acta Mater. 58 (2010) 2520-2526
Abstract
- Y. Ye, P. Li and L. He:
Valence Electron Structure Analysis of Morphologies of Al3Ti and Al3Sc in Aluminum Alloys,
Intermetallics 18 (2010) 292–297
Abstract
- X. Zhang, J. Liu, J. Tang, L. Li, M. Chen, S. Liu and B. Zhu:
Element Segregation on the Surfaces of Pure Aluminum Foils,
Appl. Surf. Sci. 256 (2010) 7300–7304
Abstract
- L. Zhuo, S. Pang, H. Wang and T. Zhang:
Effect of Cooling Rate on Microstructure and Mechanical Properties of Rapidly Solidified Al-based Bulk Alloys,
J. Alloys & Compounds 504S (2010) S117–S122
Abstract
Aug. 9 2010
- A.L. Beresina and E.A. Segida:
Microstructure Formation in Binary Al-TM Alloys under Non-Equilibrium Solidification,
J. Phys.: Conf. Series 144 (2009) 012096
Abstract,
Available Online
- G. Du, J. Deng, Y. Wang, D. Yan and L. Rong:
Precipitation of (Al,Si)3Sc in an Al–Sc–Si Alloy,
Scripta Mater. 61 (2009) 532-535
Abstract
- I. Halevy, O. Beeri and J. Hu:
Sc-strengthened Commercial Purity Aluminum under High Pressure,
J. Mater. Sci. 45 (2010) 589-592
Abstract
- Y. He, X. Zhang and Z. Cao:
Effect of Minor Sc and Zr Addition on Grain Refinement of As-Cast Al-Zn-Mg-Cu Alloys,
China Foundry 6 (2009) 214-218
Abstract,
Available Online
- C.-Y. Hyun and H.-K. Kim:
Fatigue Properties of a Modified 7075 Aluminum Alloy containing Scandium,
J. Mater. Sci. 45 (2010) 3067-3072
Abstract
- F. Jiang, K. Wen, H. Jian, C. Jiang, J. Zhao and L. Jiang:
Existing Form and Action Mechanism of Minor Scandium and Zirconium in Al-Cu-Mg Alloy,
J. Cent. South Univ. Technol. 17 (2010) 19-23
Abstract
- M. Kawasaki and T.G. Langdon:
Principles of Superplasticity in Ultrafine-Grained Materials,
J. Mater. Sci. 42 (2007) 1782-1796
Abstract
- P. Li, Y. Ye and L. He:
Valence Electron Structure Analysis of Refining Mechanism of Sc and Ti Additions on Aluminum,
Chinese Sci. Bull. 54 (2007) 1782-1796
Abstract
- L. Litynska-Dobrzynska, J. Dutkiewicz, W. Maziarz and P. Ochin:
Structure and Properties of Al-Mg-Si Alloys with Zr and Sc Additions Produced by Melt Spinning and Twin Rolling Casting Techniques,
Kovove Mater. 48 (2010) 9-15
Abstract
- F.C. Liu and Z.Y. Ma:
Contribution of Grain Boundary Sliding in Low-Temperature Superplasticity of Ultrafine-Grained Aluminum Alloys,
Scripta Mater. 62 (2010) 125-128
Abstract
- Z.L. Ning, S. Guo, F.Y. Cao, G.J. Wang, Z.C. Li and J. F. Sun:
Microstructural Evolution during Extrusion and ECAP of a Spray-Deposited Al–Zn–Mg–Cu–Sc–Zr Alloy,
J. Mater. Sci. 45 (2010) 3023-3029
Abstract
- S.R.K, Rao, B.K. Devi, K.S. Rao and K.P. Rao:
Thermo-Mechanical Treatments of Sc- and Mg-modified Al–Cu Alloy Welds,
Int. J. Adv. Manuf. Technol. 45 (2009) 836-841
Abstract
- A.B. Shubin and K.Yu. Shunyaev:
Thermodynamic Properties of Liquid Sc-Al Alloys: Model Calculations and Experimental Data,
J. Phys.: Conf. Series 98 (2008) 032017
Abstract,
Available Online
- A. Smolej, B. Skaza and E. Slacek:
Superplasticity of the 5083 Aluminium Alloy with the Addition of Scandium,
Mater. and Technol. 43 (2009) 299-302
Abstract,
Available Online
- G. Trimarchi and A. Zunger:
Finding the Lowest-Energy Crystal Structure Starting from Randomly Selected Lattice Vectors and Atomic Positions:
First-Principles Evolutionary Study of the Au–Pd, Cd–Pt, Al–Sc, Cu–Pd, Pd–Ti, and Ir–N Binary Systems,
J. Phys.: Condens. Matter 20 (2008) 295212
Abstract
- D. Vojtech:
Challenges for Research and Development of New Aluminum Alloys,
Metalurgija 49 (2010) 181-185
Abstract,
Available Online
- X. Wang, G. Chen, B. Li, L. Wu and D. Jiang:
Effects of Sc, Zr and Ti on the Microstructure and Properties of Al Alloys with High Mg Content,
Rare Metals 29 (2010) 66-71
Abstract
- S.P. Yatsenko and N.A. Sabirzyanov:
Synthesis of Compounds of Impurities with Chemically Active Additives in Liquid Aluminum and Gallium,
J. Phys.: Conf. Series 98 (2008) 032008
Abstract,
Available Online
- S.P. Yatsenko, N.A. Sabirzyanov and A.S. Yatsenko:
Dissolution Rates and Solubility of some Metals in Liquid Gallium and Aluminum,
J. Phys.: Conf. Series 98 (2008) 062032
Abstract,
Available Online
- J. Zhao, F. Jiang, H. Jian, K. Wen, L. Jiang and X. Chen:
Comparative Investigation of Tungsten Inert Gas and Friction Stir Welding Characteristics of Al–Mg–Sc Alloy Plates,
Mater. & Design 31 (2010) 306-311
Abstract
Aug. 5 2010
- H. Adachi, Y. Yamamoto, T. Aida, M. Imaoka and J. Kusui:
Dynamic Recrystallization under Hot Pressing in P/M 7000 Series Al Alloys containing Sc or Zr in Supersaturation,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1103-1109
Abstract
- A.A. Alekseev, E.A. Lukina, L.B. Khokhlatova, V.V. Antipov and I.A. Treninkov:
Phase Transformations in Alloys 1424 (Al-Li-Mg) and 1441 (Al-Li-Cu-Mg) during Long Term Low-Temperature Exposure (LLTE),
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1000-1007
Abstract
- A.L. Berezina, T.O. Monastyrska, O.A. Molebny and A.V. Kotko:
Al3Sc/Al3Zr Composite Particles Formation in Deformed Al-Mg Alloys,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1034-1039
Abstract
- A.J. Bosch, R. Senden, W. Entelmann, M. Knüwer and F. Palm:
Scalmalloy - a Unique High Strength and Corrosion Insensitive AlMgScZr Material Concept,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 2215-2223
Abstract
- M. Bünck, A. Bührig-Polaczek, B. Friedrich and R. Sauermann:
Tailoring of Aluminium-Lithium Alloys for Semi-Solid Processed Automotive Parts,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 195-201
Abstract
- N. Dahl, K. Pedersen, M. Lefstad and B. Forbord:
Co-Extrusion of Aluminium Alloys to Improve Surface Properties,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 2125-2130
Abstract
- Y. Estrin:
Ultrafine Grained Al Alloys by Severe Plastic Deformation: Processes and Properties,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 71-80
- Y. Gao Z. Luo, Q. Mo, H. Chen and C. Huang:
Atomic Bonding and Properties of Al-Li-Sc Alloy,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1285-1293
Abstract
- A. Haszler:
Technical Challenges and Solutions for Aluminium in the Transportation Market,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 24-34
- J. Hirsch, E. Brünger, S. Keller, P. Amborn and K. Kipry:
Hot Forming of Al-Mg-Mn Alloys for Light-weight Car Design,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 2388-2393
Abstract
- C.R. Hutchinson, B.M. Gable, N. Ciccosillo, P.T. Loo, T.J. Bastow and A.J. Hill:
An Experimantal Determination of Solute-Vacancy Binding Energies in High Purity Dilute Al-X Alloys,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 788-794
Abstract
- M.-J. Jeong, B.-G. Kim, S.-D. Park and B.-Y. Hur:
Mechanical Properties of 7xxx Aluminum Alloy System Foam Containing Scandium,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1713-1716
Abstract
- Z. Jia, B. Forbord, J. Røyset and J.K. Solberg:
Effect of Heat Treatments on Hardening of Al-Zr-Sc Alloys,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 141-147
Abstract
- S.-H. Kim and K.H. Kim:
Hot Compression Formability of Scandium-Containing 7XXX Aluminium Alloys,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1858-1863
Abstract
- N.I. Kolobnev, L.B. Khokhlatova, A.A. Alekseev, E.A. Lukina and S.V. Samokhvalov:
An Effect of Chemical Composition and Heat Treatment on Phase Composition and Properties of Al-Cu-Li-Zn Alloy V-1461 with Zr, Sc Additives,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 234-240
Abstract
- M. Lech-Grega, A. Klyszewski, M. Opyrchal, W. Szymanski and J. Zelechowski:
Characterization of the AlSi7 with Sc and Mg Sheets Use to Deep Drawing,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 2402-2408
Abstract
- N. Lecoq, J. Boisse, R. Patte and H. Zapolsky:
Coarsening Kinetic of Aluminium-Scandium and Aluminium-Zirconium-Scandium-Precipitates,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1270-1276
Abstract
- Y.Y. Lee and J.K. Kim:
Improvement of Mechanical Property for 7xxx Al Alloy Containing Sc with High Strength by Two-Step Homogenization Treatment,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1668-1673
Abstract
- A.K. Mukhopadhyay, A. Kumar and K.S. Prasad:
Superplastic Behaviour of High Strength Al-Zn-Mg-Cu Alloys Containing Zr and Sc,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1782-1789
Abstract
- A.F. Norman, N.P. Longfield, I. de Wit, C. Goos and S. Spangel:
Laser Beam Welding of Advanced Aluminium Aircraft Alloys,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 2012-2017
Abstract
- B.V. Ovsyannikov, N.I. Kolobnev, A.I. Kozhekin and V.M. Zamyatin:
Large-Sized Ingots Casting of Al-Mg-Si-Cu-Zn Alloys with Higher Hot Tearing
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 456-463
Abstract
- F. Palm, P. Vermeer, W. von Bestenbostel, D. Isheim and R. Schneider:
Metallurgical Peculiarities in Hyper-Eutectic AlSc and AlMgSc Engineering Materials Prepared by Rapid Solidification Processing,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 355-364
Abstract
- C. Reeb, H. Zak and B. Tonn:
Alloy Development for Drive Train Applications,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 121-126
Abstract
- R. Roumina and C.W. Sinclair:
Effect of Recovery on the Tensile Response of an Al-Mg-Sc Alloy,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 1443-1448
Abstract
- P. Uliasz, T. Knych, A. Mamala and B. Smyrak:
Investigation in Properties' Design of Heat Resistant AlZrSc Alloy Wires Assigned for Electrical Application,
Proc. 11th International Conference on Aluminium Alloys,
Sept. 22-26 2008, Aachen, Germany, eds. J. Hirsch, B. Skrotzki and G. Gottstein, Wiley-VCH 248-255
Abstract
Aug. 4 2010
- J. Dang, Y. Huang amd J. Cheng:
Effect of Sc and Zr on Microstructures and Mechanical Properties of As-cast Al-Mg-Si-Mn Alloys,
Trans. Nonferrous Met. Soc. China 19 (2009) 540-544
Abstract,
Available Online
- G. Du, J. Deng, D. Yan, M. Zhao and L. Rong:
Coarsening Behavior of Al3(Sc, Zr) Precipitates and its Influence on Recrystallization Temperature of Al-Mg-Sc-Zr Alloy,
J. Mater. Sci. Technol. 25 (2009) 749-752
Abstract,
Available Online
- C. Hamilton, S. Dymek and O. Senkov:
Friction Stir Welding of Sc-Modified Al-Zn-Mg-Cu Alloy Extrusions,
Friction Stir Weldingand Processing V, eds. R.S. Mishra, M.W. Mahoney and T.J. Lienert, TMS, 2009 315-325
- M. Kawasaki, C. Xu and T. Langdon:
Extending Flow in High-Temperature Creep to Materials with Ultrafine Grain Sizes,
Plasticity, Failure and Fatigue in Structural Materials-from Macro to Nano: Proceedings of the Hael Mughrabi Honorary Symposium,
eds. K.J. Hsia, M. Göken, T. Pollock, P.D. Portella and N.R. Moody, TMS, 2008 55-62
- W.-S. Lee and T.-H. Chen:
Comparative Study of Dynamic Impact Properties and Microstructures of Weldable and Unweldable Aluminium-Scandium (Al-Sc) Alloys,
Mater. Sci. Techn. 25 (2009) 711-725
Abstract
- W.-S. Lee and T.-H. Chen:
Impact Properties and Microstructural Evolution of Weldable and Unweldable Al-Sc Alloys,
Aluminum Alloys: Fabrication, Characterization and Applications II, eds. W. Yin, S.K. Das and Z. Long, TMS, 2009 203-209
- W.-S. Lee, T.-H. Chen and G.-T. Lu:
Adiabatic Shearing Behaviour of Unweldable Al-Sc Alloy under Extremely High Shear Loading,
Mater. Sci. Techn. 26 (2010) 720-725
Abstract
- W.-S. Lee, T.-H. Chen and G.-T. Lu:
Adiabatic Shearing Localization of Al-Sc Alloy at Extremely High Strain Rate,
TMS Annual Meeting 2010 Supplemental Proceedings vol. I: Materials Processing and Properties, TMS, 2010 145-150
- V.J. Prasad and S.S. Bhattacharya:
Development of Superplasticity in an Al-Mg-Sc Alloy,
Aluminum Alloys for Transportation, Packaging, Aerospace and Other Applications, eds. S.K. Das and W. Yin, TMS, 2007 91-100
- K.S. Rao, P.N. Raju, G.M. Reddy, M. Kamaraj and K.P. Rao:
Microstructure and High Temperature Strength of Age Hardenable AA2219 Aluminium Alloy Modified by Sc, Mg and Zr Additions,
Mater. Sci. Techn. 25 (2009) 92-101
Abstract
- K. Sadayappan, G. Gegel, D. Weiss and M. Sahoo:
Development of an Aluminum Alloy for Elevated Temperature Applications,
Shape Casting: The 3rd International Symposium, eds. J. Campbell, P.N. Crepeau and M. Tiryakiogly, TMS, 2009 203-209
- Q. Wen, F. Ye, M. Huang, J. Wang and J. Lin:
Precipitation and Coarsening Kinetics and Effect of Mechanical Property of Al3Sc in Al-Sc Alloy,
Aluminum Alloys: Fabrication, Characterization and Applications II, eds. W. Yin, S.K. Das and Z. Long, TMS, 2009 141-146
- D.H. Xiao, M. Song, B.Y. Huang, J.H. Yi, Y.H. He and Y.M. Li:
Effect of Sc Addition on Microstructure and Mechanical Properties of Al-Cu-Mg-Ag-Zr Alloy,
Mater. Sci. Techn. 25 (2009) 747-752
Abstract
- S. Yang, B. Gao, Z. Wang, Z. Shi, Y. Ban, H. Kan, X. Cao and Z. Qiu:
Preparation of Al-Sc Alloys by Molten Salt Electrolysis,
Innovations in Electrometallurgy, eds. A. Powell and M. Free, TMS, 2007 1-4
- Y. Ye, L. He and P. Li:
Differences of Grain-refining Effect of Sc and Ti Additions in Aluminum by Empirical Electron Theory Analysis,
Trans. Nonferrous Met. Soc. China 20 (2010) 465-470
Abstract,
Available Online
- X. Zhai, M. Zhang, J. Li and Y. Fu:
Preparation of Al-Sc Alloys by Molten Salts Electrolysis,
Aluminum Alloys: Fabrication, Characterization and Applications II, eds. W. Yin and S.K. Das, TMS, 2008 99-104
July 30 2010
- O. Beeri, D.C. Dunand and D.N. Seidman:
Roles of Impurities on Precipitation Kinetics of Dilute Al–Sc Alloys,
Mater. Sci. Eng. A 527 (2010) 3501-3509
Abstract,
Available Online
- M.E. van Dalen, R.A. Karnesky, J.R. Cabotaje, D.C. Dunand and D.N. Seidman:
Erbium and Ytterbium Solubilities and Diffusivities in Aluminum as determined by Nanoscale Characterization of Precipitates,
Acta Mater. 57 (2009) 4081-4089
Abstract,
Available Online
- S. Dobatkin, Y. Estrin, V. Zakharov, T. Rostova, O. Ukolova and A. Chirkova:
Improvement in the Strength and Ductility of Al–Mg–Mn Alloys with Zr and Sc Additions by Equal Channel Angular Pressing,
Int. J. Mat. Res. 100 (2009) 1697-1704
Abstract
- P. Guyot, J. Lepinoux and C. Sigli:
Application of Cluster Dynamics Modeling to the Precipitation in Aluminum Alloys,
Int. J. Mat. Res. 100 (2009) 1440-1445
Abstract
- F. Habashi:
Scandium,
Metall 62 (2008) 814-816
- Y. Harada and D.C. Dunand:
Microstructure of Al3Sc with ternary rare-earth additions,
Intermetallics 17 (2009) 17-24
Abstract,
Available Online
- R.A. Karnesky, D.C. Dunand and D.N. Seidman:
Evolution of Nanoscale Precipitates in Al microalloyed with Sc and Er,
Acta Mater. 57 (2009) 4022-4031
Abstract,
Available Online
- K.E. Knipling and D.C. Dunand:
Creep Resistance of Cast and Aged Al–0.1Zr and Al–0.1Zr–0.1Ti (at.%) Alloys at 300–400 °C,
Scripta Mater. 59 (2008) 387-390
Abstract
- K.E. Knipling, R.A. Karnesky, C.P. Lee, D.C. Dunand and D.N. Seidman:
Precipitation Evolution in Al–0.1Sc, Al–0.1Zr and Al–0.1Sc–0.1Zr (at.%) Alloys during Isochronal Aging,
Acta Mater. 58 (2010) 5184-5195
Abstract,
Available Online
- M.E. Krug, A. Werber, D.C. Dunand and D.N. Seidman:
Core–Shell Nanoscale Precipitates in Al–0.06 at.% Sc Microalloyed with Tb, Ho, Tm or Lu,
Acta Mater. 58 (2010) 134-145
Abstract,
Available Online
- W.-S. Lee and T.-H. Chen:
Effects of Strain Rate and Temperature on Dynamic Mechanical Behaviour and Microstructural Evolution in Aluminium-Scandium (Al-Sc) Alloy,
Mater. Sci. Techn. 24 (2008) 1271-1282
Abstract
- F.C. Liu and Z.Y. Ma:
Achieving Exceptionally High Superplasticity at High Strain Rates in a Micrograined Al–Mg–Sc Alloy produced by Friction Stir Processing,
Scripta Mater. 59 (2008) 882-885
Abstract
- T. Marlaud, A. Deschamps, F. Bley, W. Lefebvre and B. Baroux:
Influence of alloy composition and heat treatment on precipitate composition in Al–Zn–Mg–Cu alloys,
Acta Mater. 58 (2010) 111-121
Abstract
- W. Prukkanon, S. Chanpum and C. Limmaneevichitr:
Effect of Sc on Precipitation Hardening of AlSi6Mg Alloy,
J. Mater. Sci. Technol. 24 (2008) 17-20
Abstract,
Available Online
- M.Z. Quadir, M. Ferry, O. Al-Buhamad and P.R. Munroe:
Shear Banding and Recrystallization Texture Development in a Multilayered Al Alloy Sheet produced by Accumulative Roll Bonding,
Acta Mater. 57 (2009) 29-40
Abstract
- M.Z. Quadir, O. Al-Buhamad, K.D. Lau, R. Quarfoth, L. Bassman, P.R. Munroe and M, Ferry:
The Effect of Initial Microstructure and Processing Temperature on Microstructure and Texture in Multilayered Al/Al(Sc) ARB Sheets,
Int. J. Mat. Res. 100 (2009) 1705-1714
Abstract
- R. Roumina and C.W. Sinclair:
Recovery Kinetics in the Presence of Precipitates: The Softening Response of an Al–Mg–Sc Alloy,
Acta Mater. 58 (2010) 111-121
Abstract
- V. Sklenicka, J. Dvorák, P. Král, M. Svoboda and I. Saxl:
Some Factors Affecting the Creep Behaviour of Metallic Materials Processed by Equal-Channel Angular Pressing,
Int. J. Mat. Res. 100 (2009) 762-766
Abstract
- X. Tao, Y. Ouyang, H. Liu. Y. Feng, Y. Du and Z. Jin:
First-Principles Calculations of the Thermodynamic and Elastic Properties of the L12-based Al3RE (RE = Sc, Y, La–Lu),
Int. J. Mat. Res. 99 (2008) 582-588
Abstract
- K. Turba, P. Málek, E.F. Rauch, F. Robaut and M. Cieslar:
The Optimization of ECAP Conditions to achieve High Strain-rate Superplasticity in a Zr- and Sc-modified AA 7075 Aluminum Alloy,
Int. J. Mat. Res. 100 (2009) 851-857
Abstract
- M. Vlach, B. Smola, I. Stulíková and V. Ocenásek:
Microstructure and Mechanical Properties of the AA6082 Aluminium Alloy with Small Additions of Sc and Zr,
Int. J. Mat. Res. 100 (2009) 420-423
Abstract